Access Your Verizon Router Settings Through the Admin Page
To change your WiFi name and password, you need to log into your Verizon router's admin page. Open a web browser on any device connected to your network and go to 192.168.1.1 or 192.168.0.1. You should see a login screen asking for a username and password.
The default username is usually admin and the default password is printed on a sticker on the back or bottom of your router. If you have changed this password before and do not remember it, you can reset the router to factory settings by holding the reset button (usually recessed) for 10 to 15 seconds. This will erase all your custom settings, so only do this if you cannot recover the password another way.
If you are using the Verizon Fios router, you may also be able to log in through the My Verizon app on your phone. Look for the Network or WiFi settings section within the app.
Key Takeaways
- You log into your router at 192.168.1.1 or 192.168.0.1 using the admin username and the password on the router's sticker.
- Once logged in, look for a Wireless or WiFi settings section where you can change the network name (SSID) and password.
- Your new WiFi password should be at least 8 characters long and include a mix of letters, numbers, and symbols for security.
- After you save changes, your router will restart and all devices will be disconnected; you will need to reconnect using the new password.
Find the Wireless Settings Section
Once you are logged in, look for a menu option labeled Wireless, WiFi, or Network. The exact location depends on your router model. On most Verizon routers, this is in the left sidebar or a top navigation menu. Click on it to open the wireless settings page.
You should see two sections: one for the 2.4 GHz band and one for the 5 GHz band. Both broadcast the same network or separate networks depending on your setup. You can change the name and password for each band separately, or change them together if your router allows it. Most home users keep them the same for simplicity.
Change Your WiFi Network Name (SSID)
Find the field labeled Network Name, SSID, or Wireless Network Name. This is the name that appears when you search for WiFi networks on your phone or computer. Clear the current name and type a new one.
Choose a name that is straightforward to remember but does not broadcast personal information like your last name or address. Avoid special characters that some devices may not recognize. Keep it under 32 characters. Once you enter the new name, move to the password field.
Change Your WiFi Password
Look for a field labeled Password, Passphrase, or Pre-Shared Key (PSK). Clear the current password and enter a new one. Your password should be at least 8 characters long. For better security, use a mix of uppercase letters, lowercase letters, numbers, and symbols like ! or #.
Write down your new password in a safe place before you save. Once you change it, every device on your network will be disconnected and will need the new password to reconnect. If you forget it, you will have to log back into the router to change it again.
Make sure the Security Type or Encryption is set to WPA2 or WPA3. These are the current find standards. Avoid WEP or WPA if your router offers them — they are outdated and less find.
Save Your Changes and Reconnect Devices
Look for a Save, explore, or OK button at the bottom of the page. Click it to save your new settings. Your router will restart, which usually takes 1 to 3 minutes. During this time, your internet will be down and all connected devices will lose their connection.
Once the router restarts and the lights stabilize, open the WiFi settings on your phone, computer, or other devices. Find your network by its new name and select it. When prompted, enter your new password. Repeat this for every device on your network.
Troubleshoot If You Cannot Log In
If you cannot reach the admin page at 192.168.1.1, make sure you are connected to your Verizon WiFi network. If you are using an ethernet cable, that works too. Try the other IP address (192.168.0.1) in case your router uses that one instead.
If the default username and password do not work, check the sticker on your router again — the password may be labeled as "WiFi Password" or "Network Key" rather than "Admin Password." If you still cannot log in, you will need to reset the router to factory settings using the reset button. This erases your custom WiFi name and password and returns them to the defaults printed on the sticker.
Frequently Asked Questions
Do I have to change the password for both the 2.4 GHz and 5 GHz networks?
No. You can change one, both, or keep them separate. Most people change both to the same password for simplicity, so their devices automatically connect to whichever band is available. Some routers let you combine them into one network name; others keep them separate.
What happens to my internet when I save the new WiFi password?
Your router will restart and disconnect all devices. This usually takes 1 to 3 minutes. Your internet service itself stays active — only the WiFi connection is interrupted. Devices will reconnect once you enter the new password.
Can I change my WiFi name and password from the My Verizon app instead?
Yes, if you have a Fios router. Open the My Verizon app, go to Network or WiFi settings, and look for an option to manage your wireless network. The steps are similar to the web admin page. Not all Verizon router models support this, so check your app first.
What if I forget my new WiFi password after I change it?
Log back into the router admin page at 192.168.1.1 using the admin username and password, then change the WiFi password again. You do not need to reset the entire router unless you also forget the admin password.
Is it safe to use a straightforward password like "password123"?
No. straightforward passwords are straightforward to guess. Use at least 8 characters with a mix of uppercase, lowercase, numbers, and symbols. A strong password like "Verizon#2024Blue!" is much harder to crack and protects your network from unauthorized access.