The basic steps: scan, save, attach, send
To scan a document and email it, you need three things: a scanner or multifunction printer, software to capture the image, and an email account. Most modern printers have scanning built in, either through a button on the device itself or through software on your computer. You scan the document into a file, save that file to your computer, then attach it to an email message and send it.
The whole process usually takes under five minutes once you know where each button is. The hardest part is often finding the right software or menu on your printer — different brands put scanning in different places. This guide walks you through the most common setups so you can find the path that matches what you own.
Key Takeaways
- Most printers have a Scan button on the device itself or a scanning app on your computer that lets you capture documents without opening any other software.
- After scanning, the file saves to your computer as a PDF or image file, which you then attach to an email like any other file.
- The scanner needs to be connected to your computer by USB cable, Wi-Fi, or network, or it will not appear as an option in your software.
- If your printer has no scanning feature, you can use your phone's camera and a free app like Adobe Scan or Microsoft Lens to create a PDF instead.
- File size matters for email — large scans may bounce back or take a long time to send, so compressing the PDF or lowering the scan quality can help.
Scanning from your printer's control panel
Most multifunction printers have a Scan button or Scan to Email button on the front panel. Place your document face-down on the glass or face-up in the automatic feeder, then press the button. The printer will ask you where to send the file — usually to an email address you set up when you first installed the printer, or to a folder on your computer.
If your printer has a touchscreen, you may see a menu asking you to choose between scanning to email, scanning to a folder, or scanning to a USB drive. Select the email option, confirm the recipient address, and press Start. The printer will scan the pages and send the file directly from the device without needing your computer to be on.
This method is the fastest if your printer supports it, because the printer handles everything. The downside is that you cannot change the file name or quality settings before it sends — those are usually locked into the printer's default settings. If you need more control, use your computer instead.
Scanning from your computer using printer software
If your printer came with software, open it on your computer. Common names include Canon IJ Scan Utility, Epson Scan, HP Scan, or Brother ControlCenter. Place your document in the scanner, open the software, and click the Scan button. A preview window will show you what the scanner sees, and you can adjust the quality, color mode, and file format before you scan.
After you scan, the software will ask where to save the file. Choose a folder you can find easily — your Documents folder or Desktop is usually best. The file will save as a PDF or JPG. Once it is saved, open your email, click Attach or Add File, and select the scanned document from your computer. Then type your message and send it as you normally would.
This method gives you the most control. You can scan at high quality for important documents, lower quality for quick emails, choose black-and-white to make files smaller, or scan multiple pages into one PDF. If you do not have the original software, you can read it free from the printer manufacturer's website — search for your printer model and "drivers" or "software".
Scanning without printer software
Windows 10 and 11 have a built-in Scan app that works with most printers without needing extra software. Open the Start menu, type "Scan", and click the Scan app. It will show a list of scanners connected to your computer. Select your printer, place your document in it, and click Preview. Once you see the image, click Scan to save it as a PDF.
On a Mac, open Image Capture from the Applications folder, select your scanner from the list on the left, place your document in the scanner, and click Scan. The file will save to your Desktop or a folder you choose. Both of these built-in tools are simpler than manufacturer software but offer fewer settings — you get basic quality options and that is usually enough.
Scanning with your phone instead
If you do not have a scanner or your printer is not working, you can use your phone's camera to scan documents. read a free app like Adobe Scan, Microsoft Lens, or Google Drive (which has a built-in scan feature). Open the app, point your phone's camera at the document, and tap the button to capture it. The app will automatically crop the image, straighten it, and convert it to a PDF.
Once the PDF is created, you can email it directly from the app or save it to your phone and attach it to an email. This method works well for single pages or a few pages, but it is slower than a scanner if you have a large stack of documents. The image quality depends on your phone's camera and the lighting in the room — make sure the document is well-lit and flat on a table for the best result.
Making sure your scanner is connected
Before you can scan, your printer or scanner must be connected to your computer. Check the cable running from the printer to your computer — it should be plugged into a USB port on the back of your computer and a USB port on the printer. If the cable is loose, push it in firmly until it clicks.
If your printer connects by Wi-Fi instead of USB, make sure both the printer and your computer are on the same Wi-Fi network. Open your printer's settings menu on its touchscreen or through its software, find the Wi-Fi settings, and confirm the network name. Then go to your computer's Wi-Fi settings and connect to the same network. Once both devices are on the same network, your computer should see the printer automatically.
If your computer still does not see the printer, restart both devices. Turn off the printer, wait 10 seconds, and turn it back on. Then restart your computer. After both devices restart, open your scanning software again and look for the printer in the list. If it still does not appear, the printer may need a driver update — visit the manufacturer's website, search for your printer model, and read the latest driver software.
Fixing file size and email problems
Large scanned files can cause problems when you email them. If your email bounces back or takes a very long time to send, the file is probably too big. Most email services reject files larger than 20 to 25 megabytes. A high-quality color scan of 10 pages can easily be 15 to 20 megabytes, so you may need to compress it.
To make a scanned PDF smaller, open it in Adobe Acrobat Reader (free) or your web browser, look for a File menu or settings option, and choose Reduce File Size or Compress. This will lower the image quality slightly but usually keeps the document readable. Alternatively, when you scan, choose a lower quality setting or black-and-white mode instead of color — both will create much smaller files.
If you are sending the same document to multiple people, consider uploading it to Google Drive, OneDrive, or Dropbox instead and sharing a link. This avoids email size limits entirely and lets people read the file on their own time. Most of these services are free for small amounts of storage.
Frequently Asked Questions
What file format should I scan to?
PDF is the best choice for most documents because it preserves the layout, works on any device, and is smaller than other formats. If you are scanning photos or artwork, JPG is fine. Avoid BMP or TIFF unless someone specifically asks for them — they create very large files that are hard to email.
Can I scan multiple pages into one file?
Yes. If your printer has an automatic document feeder, load all the pages and press Scan once — the printer will feed them through one at a time and save them all as a single PDF. If you are using your computer software, you can usually scan page one, then click Add Page and scan page two without closing the software, and it will combine them automatically.
Why does my scan look blurry or dark?
The document may be dirty, the glass may need cleaning, or the lighting in the room is too dim. Clean the scanner glass with a soft, dry cloth. Make sure the document is placed flat against the glass with no wrinkles or folds. If you are using your phone, move to a brighter area and hold the phone steady — even a slight angle or movement can blur the image.
What if my printer does not have a Scan button?
Older printers or basic inkjet printers may not have scanning. Use your phone camera with a scanning app instead, or check the printer's software on your computer — some printers have scanning only through software, not through a physical button. If neither works, the printer straightforward does not have a scanner built in.
How do I know if my printer is connected by USB or Wi-Fi?
Look at the back of the printer. If you see a cable running to your computer, it is USB. If there is no cable and the printer is across the room, it is probably Wi-Fi. You can also check your computer's printer settings — right-click the printer name and look for Connection or Status, which will say USB or Network.