The basic steps for most multifunction printers

Most multifunction printers have a Scan to Email button or menu option that sends scanned documents directly to an email address without needing a computer. You place your document face-down on the glass or in the automatic feeder, press the Scan to Email button, select or enter the recipient's email address, and the printer sends the file when the scan finishes.

The printer needs two things to work: a connection to your network (WiFi or ethernet) and email settings configured in its menu. If your printer has never sent email before, you will need to enter your email server details once, usually through the printer's touchscreen or web interface. After that, scanning to email works the same way every time.

The actual steps vary slightly by brand and model, but the principle is identical across HP, Canon, Brother, Xerox, and Ricoh machines. The document arrives as a PDF attachment, usually within a few seconds to a few minutes depending on file size and your internet speed.

Key Takeaways

  • Your printer must be connected to your network and have email settings configured before you can scan to email for the first time.
  • The Scan to Email button is usually on the printer's main touchscreen or control panel, sometimes labeled as "Email" or "Send".
  • You can send to a single address, multiple addresses, or a stored contact depending on your printer model.
  • The scanned document arrives as a PDF attachment, and you can usually adjust resolution and color settings before sending.

Setting up email on your printer for the first time

Before you can scan to email, your printer needs to know your email server address, your email address, and usually a password. This information lives in the printer's settings menu, not on your computer. Open the printer's menu (usually a button labeled "Menu," "Settings," or a gear icon on the touchscreen), then look for "Network," "Email," "SMTP," or "Scan to Email Settings."

You will need your email provider's outgoing mail server address — for Gmail it is smtp.gmail.com, for Outlook it is smtp-mail.outlook.com, and for most corporate email it is something like mail.yourcompany.com. Your IT department or email provider's support page will have this. Enter the server address, your full email address, and your password (or an app-specific password if your email uses two-factor authentication). Some printers also ask for a port number; 587 is the standard for most providers.

After you save these settings, the printer will try to send a test email to confirm everything works. If the test fails, double-check the server address and password — these are the most common mistakes. Once the test succeeds, you are ready to scan.

Sending a scan to one person

Place your document in the scanner — face-down on the glass if you have a single-page document, or in the automatic feeder if you have multiple pages. Press the Scan to Email button on the printer's control panel. The printer will ask you to enter or select the recipient's email address.

Most printers let you type the address directly using the touchscreen keypad, or select from a stored contact list if you have added addresses before. Some models also have a phone-book feature where you can save frequently used email addresses so you do not have to type them every time. After you select the address, the printer usually shows you options to change the resolution (higher resolution makes larger files), color mode (color, black and white, or grayscale), and file format (usually PDF). The defaults work for most documents — leave them alone unless you have a reason to change them.

Press "Send" or "Start," and the printer will scan the document and email it. You will see a confirmation message on the screen when it finishes. The email usually arrives within a minute or two.

Sending to multiple people at once

Many printers let you select multiple recipients before sending. After you press Scan to Email and enter the first address, look for an "Add Recipient," "Add Another," or "+" button. Select it, then enter the next email address. Repeat for each person who should receive the scan.

Some printers have a limit on how many recipients you can add in one scan — usually five to ten. If you need to send to more people than that, you may need to scan once and send to a group email address instead, or scan multiple times. Check your printer's manual or help menu to see what your model supports.

Troubleshooting when the email does not send

If the printer shows an error message or the email never arrives, the most common cause is incorrect email server settings. Go back into the email settings menu and verify the SMTP server address matches what your email provider lists — even a small typo will cause the send to fail. Also check that you entered your full email address (including the @domain part) and the correct password.

If the settings look correct but the email still will not send, try restarting the printer — unplug it for 30 seconds, then plug it back in. This clears temporary network glitches. If that does not work, check that your printer is actually connected to your network by looking at the network status in the printer's settings menu. The printer needs an active internet connection to send email.

If the email sends but arrives hours later or not at all, the problem is usually on the receiving end — check the recipient's spam folder, or ask them to add your printer's email address to their contacts so future scans do not get filtered. Some corporate email systems also block emails from devices they do not recognize; if this happens, contact your IT department.

Scanning to email from your phone or computer instead

If your printer does not have a Scan to Email button, or if you prefer not to configure email settings on the printer itself, you can scan the document to your computer or phone first, then email it from there. Most printers come with software that lets you scan directly into your email process — open the software, select your printer, scan the document, and the software will open your email with the scan already attached.

This method is slower than using the printer's built-in email feature, but it gives you more control over the email message — you can add a subject line, write a note, and choose which email account to send from. It also works if your printer is not connected to the network or if you do not want to store email credentials on the printer.

Frequently Asked Questions

What file format does the scan arrive in?

Most printers send scans as PDF files by default, which work on any device and preserve the document's layout. Some printers also support TIFF or JPEG formats — check your printer's scan settings menu to see what options are available. PDF is the safest choice for documents you need to share or store.

Can I scan to email if my printer is not connected to WiFi?

No, the printer needs an active network connection to send email. If your printer is connected by USB cable only, you will need to either connect it to your network (WiFi or ethernet) or scan to your computer and email from there instead.

Why does my scan arrive as multiple emails instead of one?

Some printers send each page as a separate email if you have not configured the settings correctly. Check your printer's scan settings and make sure the "Combine Pages" or "Single File" option is turned on. This tells the printer to merge all pages into one PDF before sending.

Do I need to enter the recipient's email address every time I scan?

No, most printers let you save frequently used email addresses as contacts. After you enter an address once, you can select it from a list on future scans instead of typing it again. Check your printer's address book or contact list feature in the settings menu.

What happens if I scan a document but the email fails to send?

The scan is usually deleted from the printer's memory, but the document itself is not lost — you still have the original. If the email fails, the printer will show an error message. Check your network connection and email settings, then try scanning again.