The fastest way depends on what equipment you have
If your printer has a scanner built in, you can scan directly to email without using a computer at all. If you only have a standalone scanner or a phone, you'll use your computer or phone as the middle step. The actual process takes two to five minutes once you know where the buttons are.
The method that works for you depends on three things: whether your printer is networked (connected to WiFi or your home network), whether you have the printer's software installed on your computer, and whether you're comfortable with your phone's camera as an alternative. Most people find one of these three routes works best.
Key Takeaways
- Printers with built-in scanners can email documents directly if they're connected to WiFi and you've set up the email address in the printer's menu.
- If your printer can't email directly, scan to your computer using the printer's software, then attach the file to an email from your email program.
- Your phone's camera and a free app like Adobe Scan or Microsoft Lens can turn a photo into a PDF and email it in under a minute.
- The scanned file is usually a PDF, which almost everyone can open, and the file size is small enough to send through any email provider.
- If the scan is blurry or too dark, check that the glass is clean and the document is flat against the scanner bed before you try again.
Scanning directly from a printer with email built in
Many modern printers can scan and email without a computer. Look at your printer's control panel — if there's a "Scan to Email" button or a touchscreen menu with email options, your printer likely has this feature. The printer must be connected to WiFi and to your internet-connected network.
To set this up, you'll need to enter an email address into the printer's menu. Go to Settings or Network Settings on the printer's touchscreen or control panel, find Email or Scan to Email, and enter the email address where you want the scan sent. Some printers ask for your email password; others just need the address. Check your printer's manual or the manufacturer's website if you're not sure which one yours requires.
Once that's done, place your document face-down on the scanner glass, close the lid, and press the Scan to Email button. The printer will scan the page and send it to that email address within a few seconds to a minute. If nothing arrives, check that the printer is connected to WiFi (look for a WiFi icon on the display) and that you entered the email address correctly.
Scanning to your computer, then emailing the file
If your printer doesn't have email built in, or if you want to edit or rename the file before sending it, scan to your computer instead. Place the document on the scanner glass, open the printer's software on your computer (usually called something like "Canon IJ Scan Utility" or "Epson Scan"), and click the Scan button. The software will show you a preview of what it's about to scan.
The software will ask you where to save the file. Choose a folder you'll remember — your Documents folder or Desktop works fine. The file will usually be saved as a PDF, which is the standard format for scanned documents. Once it's saved, you can open your email program (Gmail, Outlook, Apple Mail, or whatever you use), start a new message, and attach the file by clicking the paperclip icon or "Attach" button.
If you don't have the printer's software installed, you can often read it from the manufacturer's website. Search for your printer model and "driver" or "software" — HP, Canon, Epson, and Brother all have free downloads. If you can't find it or don't want to install software, use your phone instead (see the next section).
Using your phone's camera and a scanning app
Your phone's camera can work as well as a scanner for most documents. read a free app like Adobe Scan, Microsoft Lens, or Google PhotoScan from your phone's app store. These apps use your phone's camera to take a photo of the document, automatically crop it, and turn it into a PDF.
Open the app, point your phone's camera at the document, and tap the button to take the photo. The app will show you the result and let you adjust the crop or brightness if needed. Once you're happy with it, the app will save it as a PDF. From there, you can open your email app, start a new message, and attach the PDF file just as you would from a computer.
This method is often faster than walking to a printer, especially if the printer is in another room or if you only need to scan one or two pages. The photo quality is usually good enough for text documents, though it may not work as well for very small print or photos.
What to do if the scan is blurry or too dark
A blurry scan usually means the document wasn't flat against the glass or the glass was dirty. Wipe the scanner glass with a soft, dry cloth, place the document flat and straight on the glass, close the lid gently, and scan again. If you're using your phone, make sure the lighting is good — scan in daylight or under a lamp rather than in a dim room.
If the scan is too dark, the scanner's brightness setting may be too low. In your printer's software, look for a Brightness or Exposure slider before you scan. Move it to the right to lighten the scan. If you're using a phone app, most of them have a brightness adjustment after you take the photo — use that before you save the PDF.
If the document has very small text and the scan is hard to read, try scanning at a higher resolution. In the printer software, look for a DPI or Resolution setting and change it from 300 DPI to 600 DPI. This makes the file larger but captures more detail. For most documents, 300 DPI is fine.
File size and email limits
A scanned document is usually between 100 kilobytes and 2 megabytes, depending on the resolution and how many pages you scan. Most email providers allow attachments up to 20 or 25 megabytes, so a single scanned document will never be too large to send. If you're scanning many pages at once, the file might get larger — a 20-page document could be 10 to 15 megabytes — but it should still go through.
If an email bounces back saying the file is too large, try scanning at a lower resolution (200 DPI instead of 300) or splitting the document into two emails. You can also compress the PDF file using free online tools like Smallpdf or ILovePDF, though this usually makes the text slightly less sharp.
Frequently Asked Questions
Can I scan multiple pages at once?
Yes. Place the first page on the scanner, scan it, then place the second page on the glass and scan again. The software will ask if you want to add another page. Keep going until all pages are scanned, then save the file as one PDF. If your printer has an automatic document feeder (a slot at the top where you stack pages), you can load all pages at once and the printer will scan them automatically.
What format should I scan in?
PDF is the best choice for most documents because almost everyone can open it and it preserves the layout. Some printers also offer JPEG (an image format) or TIFF (a high-quality image format). For documents you plan to edit later, JPEG or TIFF gives you more flexibility, but PDF is fine if you just need to send it and have someone read it.
Do I need to be connected to WiFi to scan from my printer?
Only if you want to scan directly to email from the printer itself. If you're scanning to your computer, the printer just needs to be plugged in and connected to your computer with a USB cable or network connection. Your computer needs internet to send the email, but the scanner itself doesn't.
Can I scan a document and send it to multiple people at once?
Yes. If you're scanning to your computer, attach the file to one email and add multiple recipients in the "To" field. If your printer has scan-to-email built in, it usually only sends to one address at a time, so you'd need to scan once for each person or scan to your computer and email it from there instead.
What if my printer is old and doesn't have scanning software available anymore?
Use your phone's camera and a scanning app instead — it's often faster anyway. If you really need to use the printer, check the manufacturer's website for legacy drivers, or try a generic scanning program like VueScan, which works with many older printers. For most people, the phone method is simpler and doesn't require any software installation.