Reset the GoPro 3 WiFi Password Through the Camera Menu

The GoPro 3 stores its WiFi password in the camera's settings, and you can reset it directly from the device without a computer. Power on the camera, press the Menu button (the left button on the back), and navigate to Wireless. From there, select Change Name/Password or WiFi Password depending on your firmware version. The camera will display the current password and let you create a new one using the arrow buttons to scroll through letters and numbers.

Once you enter your new password, press the Front button (the shutter button on top) to confirm. The camera will save the change and return to the menu. Your GoPro 3 is now broadcasting with the new WiFi password. Any device that was previously connected will lose that connection and will need the new password to reconnect.

If you cannot find the Wireless menu, your camera may be running an older firmware version. In that case, look for Setup in the main menu, then WiFi, then Password. The exact path varies slightly between firmware releases, but the WiFi settings are always in the Setup or Wireless section.

Key Takeaways

  • You can reset the WiFi password directly on the GoPro 3 by going to Menu > Wireless > Change Name/Password and entering a new password with the arrow buttons.
  • The camera will save the new password when ready after you confirm it, and any previously connected devices will need to reconnect using the new password.
  • If you cannot locate the Wireless menu, check the Setup section instead — the exact path depends on your camera's firmware version.
  • You do not need a computer or the GoPro app to reset the WiFi password; the camera's physical buttons are all you need.

What to Do If the Menu Button Does Not Respond

If the camera's buttons are not responding or the menu is frozen, perform a hard reset by holding down the Power button for 10 seconds until the camera shuts off completely. Wait 30 seconds, then power it back on. This clears any temporary glitches that may be preventing the menu from opening.

If the buttons still do not respond after a hard reset, the camera may have a hardware issue unrelated to the WiFi password. In that case, you will need to contact GoPro support or visit a repair center, as the password cannot be changed without access to the menu.

Resetting WiFi Without Remembering the Old Password

If you have forgotten the current WiFi password and cannot access the menu to change it, you can perform a factory reset to restore all settings to their defaults. This will erase all video and photo files on the camera's memory card, so transfer any footage you want to keep before proceeding.

To factory reset the GoPro 3, go to Menu > Setup > Format and select Yes to confirm. The camera will erase its storage and reset all settings, including the WiFi password, to factory defaults. The default WiFi password for a GoPro 3 is typically goprohero or goprohero3, depending on the model. After the reset, you can set a new password using the steps in the first section.

Connecting a Device to Your GoPro 3 After Resetting the Password

Once you have set a new WiFi password on the camera, your phone or tablet will no longer connect using the old password. Open your device's WiFi settings and look for the network name (SSID) that matches your GoPro 3 — it usually starts with "GoPro" followed by numbers or letters.

Select that network and enter the new password you just created on the camera. Your device should connect within a few seconds. If the connection fails, double-check that you entered the password correctly — GoPro WiFi passwords are case-sensitive, so uppercase and lowercase letters matter.

Why Your GoPro 3 WiFi Password Keeps Resetting

If you set a new WiFi password but it reverts to the default the next time you power on the camera, the settings may not have saved properly. This usually happens if the camera was powered off too quickly after you confirmed the new password. Always wait at least 10 seconds after pressing confirm before turning off the camera to may support the setting is written to memory.

If the password continues to reset even after waiting, the camera's internal storage may be failing. Try the factory reset described above, and if the problem persists after that, contact GoPro support — the memory chip that stores settings may need replacement.

Changing Your WiFi Network Name (SSID) on the GoPro 3

While you are in the WiFi settings menu, you can also change the network name that other devices see when they search for WiFi. This is called the SSID (Service Set Identifier). Go to Menu > Wireless > Change Name/Password and look for an option to edit the name separately from the password.

Changing the network name does not affect the password or security — it only changes what appears in the list of available networks on your phone or tablet. This is useful if you want to identify your GoPro 3 with a custom name instead of the default "GoPro3" label.

Frequently Asked Questions

Can I reset the WiFi password without turning on the camera?

No. The GoPro 3 WiFi password is stored in the camera's memory and can only be changed through the camera's menu system. The camera must be powered on and responding to button presses to access the settings.

What is the default WiFi password for a GoPro 3?

The default WiFi password is usually goprohero or goprohero3, depending on your specific model and firmware version. If neither works, perform a factory reset to restore the camera to its original settings.

Will resetting the WiFi password delete my videos?

No. Changing the WiFi password through the menu does not affect your video or photo files. Only a factory reset will erase your footage, and that is a separate action you must confirm explicitly.

How long should the WiFi password be?

The GoPro 3 accepts passwords between 8 and 63 characters. Use a mix of letters, numbers, and symbols to make it harder to guess, but keep it straightforward enough that you can remember it or store it safely.

Can I use special characters in the WiFi password?

The GoPro 3 WiFi menu supports letters, numbers, and some special characters, but not all. Stick to standard characters like hyphens, underscores, and periods. Avoid symbols like @ or # as they may not be recognized by the camera.