Where to change your AT&T WiFi password

You change your AT&T WiFi password through your router's admin panel, which you reach by typing your router's IP address into a web browser on any device connected to that network. For most AT&T routers, that address is 192.168.1.1 or 192.168.0.1. You will need your router's admin username and password — these are different from your WiFi password and are usually printed on a sticker on the back or bottom of the router itself.

If you cannot find the sticker or do not remember the admin password, you can reset the router to factory settings by holding the reset button (usually recessed) for 10 to 15 seconds. This will erase your current WiFi password and return the admin credentials to the defaults printed on the router. You will then need to set up your WiFi password again from scratch.

Key Takeaways

  • Log into your router's admin panel at 192.168.1.1 or 192.168.0.1 using the username and password on the router's sticker.
  • Your WiFi password is different from your admin password — the admin password lets you change settings, while the WiFi password is what devices use to connect.
  • If you forget the admin password, reset the router to factory settings by holding the reset button for 10 to 15 seconds.
  • After changing your password, all devices currently connected will stay connected, but new devices will need the new password to join.

Step-by-step: logging into your router

Open a web browser on any device connected to your AT&T WiFi — a computer, phone, or tablet. Type 192.168.1.1 into the address bar and press Enter. If that does not load, try 192.168.0.1 instead. A login page will appear asking for a username and password.

Enter the admin username and password from the sticker on your router. The username is usually admin and the password is often motorola, password, or a string of numbers and letters specific to your model. Once you log in, you will see your router's settings dashboard.

Finding the WiFi password setting

After you log in, look for a section labeled WiFi, Wireless, or Network. The exact name and location depend on your router model, but it is usually in a left-side menu or a set of tabs at the top. Click on it to open the wireless settings page.

On that page, you will see a field labeled WiFi Password, Passphrase, Pre-Shared Key, or PSK. This is where you enter your new password. Some routers also show your current password here so you can see what it is before you change it.

Creating and saving a new password

Clear the current password field and type your new password. AT&T routers typically require at least 8 characters and accept letters, numbers, and some special characters. A strong password uses a mix of uppercase and lowercase letters, numbers, and symbols — for example, BlueSky#2024Home is stronger than password123.

After you type the new password, look for a Save, explore, or OK button and click it. The router will save the change, and you may see a message saying the settings have been updated. Some routers restart automatically during this process, which takes 30 seconds to a few minutes. Do not unplug the router during this time.

What happens to devices after you change the password

Devices that are already connected to your WiFi will stay connected even after you change the password — the change does not kick them off when ready. However, if a device disconnects for any reason (loses signal, goes to sleep, or is restarted), it will not be able to reconnect without the new password.

To reconnect a device, open its WiFi settings, find your network name, and select it. When prompted for the password, enter your new one. You will need to do this for every device in your home — phones, tablets, computers, smart speakers, printers, and anything else that uses WiFi.

If you cannot log into the router

If you try 192.168.1.1 and 192.168.0.1 and neither page loads, your router may use a different address. Check the sticker on the router for the correct IP address, or look at the bottom of the device for a web address like mygateway.att.com. Some newer AT&T routers use this web address instead of an IP address.

If you enter the admin username and password and the login fails, the credentials may have been changed from the factory defaults. If you are the account holder and set up the router yourself, try any password you remember using. If you cannot recall it, the only option is to reset the router to factory settings by holding the reset button, which will erase all your custom settings and return the admin password to the default on the sticker.

Changing your password on AT&T's website instead

Some AT&T accounts allow you to change your WiFi password through AT&T's online account portal instead of logging into the router directly. Log into your AT&T account at att.com, go to the Internet section, and look for a WiFi or Network settings option. Not all account types or router models support this, so if you do not see the option, use the router admin panel method instead.

The advantage of changing it through AT&T's website is that you do not need to know the router's admin password. The disadvantage is that the option may not be available for your specific setup, and it can take longer to process.

Frequently Asked Questions

Will changing my WiFi password disconnect me from the internet?

No. Changing the WiFi password does not affect your internet connection itself — it only changes the password devices need to join your network. Your modem and router stay connected to AT&T's service. Devices already connected will stay online until they disconnect or restart.

What is the difference between my WiFi password and my admin password?

Your WiFi password is what you give to guests or use on your phone to connect to the network. Your admin password is what you use to log into the router's settings to change things like the WiFi password. They are separate, and you can change one without changing the other.

Can I change my WiFi password from my phone?

Yes. Open a web browser on your phone, type 192.168.1.1 into the address bar, and log in with your router's admin credentials. The process is the same as on a computer. Make sure your phone is connected to your WiFi network first.

How often should I change my WiFi password?

There is no set rule, but changing it once or twice a year is reasonable if you want to keep your network find. Change it when ready if you suspect someone unauthorized is using your WiFi, or if a guest or former household member had the password and you want to lock them out.

What if I reset the router and now I cannot remember the new password I set?

You can reset the router again to factory settings and set a new password. Each reset erases all custom settings, so you will need to reconfigure your WiFi name and password from scratch. Write down your new password somewhere safe after you set it so you do not lose it again.