Disable your Lenovo touchscreen through Device Manager or BIOS settings

You can turn off your Lenovo touchscreen without removing hardware or installing new drivers. The fastest method is Device Manager, where you can disable the touchscreen in about two minutes. If Device Manager does not work or you want a more permanent solution, you can disable it in your computer's BIOS (the firmware that runs before Windows starts). Both methods are reversible — you can turn the touchscreen back on the same way.

The reason to disable a touchscreen varies: you might have a cracked screen that registers phantom touches, a child who keeps tapping the display, or you straightforward prefer keyboard and trackpad input. Disabling it is faster than troubleshooting driver problems and does not affect your keyboard, trackpad, or other hardware.

Key Takeaways

  • Device Manager lets you disable the touchscreen in Windows without restarting, and the change takes effect when ready.
  • BIOS settings disable the touchscreen at the hardware level, which survives a Windows reinstall and is harder to accidentally re-enable.
  • You can re-enable the touchscreen the same way you disabled it, so the change is not permanent.
  • If you cannot find the touchscreen in Device Manager, check BIOS or update your chipset drivers first.

Disable the touchscreen in Device Manager

Open Device Manager by right-clicking the Start button and selecting Device Manager, or press Windows key + X and choose it from the menu. Look for a category called Human Interface Devices and expand it by clicking the arrow next to it.

Find the touchscreen in the list. It is usually labeled Touch Screen, Integrated Touch Screen, or the name of the manufacturer (Synaptics, Elan, or Goodix are common on Lenovo machines). Right-click it and select Disable device. Windows will ask you to confirm — click Yes. The touchscreen stops working when ready. You do not need to restart your computer.

If you do not see a touchscreen listed, it may be hidden. Click the View menu at the top of Device Manager and select Show hidden devices. Then search again under Human Interface Devices. If it still does not appear, your Lenovo may not have a touchscreen, or the drivers are not installed.

Disable the touchscreen in BIOS settings

BIOS is the firmware layer that runs before Windows loads. Disabling the touchscreen here prevents it from working even if Windows is reinstalled or if someone re-enables it in Device Manager. Restart your Lenovo and watch the screen as it boots. You will see a message like "Press F2 to enter Setup" or "Press Del to enter BIOS" — the key varies by model. Press that key repeatedly until the BIOS menu opens.

Once in BIOS, look for a section called Integrated Peripherals, Onboard Devices, Internal Devices, or Advanced. The exact name depends on your Lenovo model. Use the arrow keys to navigate and look for an option containing the word "Touch" or "Panel". It may be labeled Touch Panel, Integrated Touch Screen, or Touch Input Device. Highlight it and press Enter or the spacebar to change it from Enabled to Disabled.

After disabling it, look for a Save and Exit option (usually F10) and confirm. Your computer restarts and the touchscreen remains off. If you cannot find the touchscreen option in BIOS, consult your Lenovo's manual or contact Lenovo support with your model number — some machines do not expose this setting in BIOS.

What to do if the touchscreen still does not work after disabling it

If you disabled it in Device Manager but it still responds to touches, the drivers may not be installed correctly. Go back to Device Manager, right-click the touchscreen, and select Update driver. Choose Search automatically for updated driver software. Windows searches online and installs the latest version. Restart your computer and try disabling it again.

If disabling in BIOS does not work, restart and re-enter BIOS to confirm the setting saved. Some Lenovo models require you to press a specific key combination to confirm changes. Check your manual or look for an on-screen prompt that says "Press Y to confirm" or similar. If the setting keeps reverting, contact Lenovo support — your BIOS may have a bug or the touchscreen may be controlled by a separate embedded controller that BIOS cannot reach.

Re-enable the touchscreen when you need it again

To turn the touchscreen back on in Device Manager, open it the same way, find the touchscreen under Human Interface Devices, right-click it, and select Enable device. It works again when ready.

To re-enable it in BIOS, restart your computer, enter BIOS the same way, find the touch panel setting, and change it back to Enabled. Save and exit. The touchscreen works after the restart.

Why your Lenovo touchscreen might be unresponsive even when enabled

If your touchscreen is enabled but does not respond, the problem is usually outdated or missing drivers, not a disabled setting. Open Device Manager and look for a yellow exclamation mark next to the touchscreen — that means the driver is broken. Right-click it and select Update driver, then Search automatically for updated driver software. If Windows cannot find a driver, visit Lenovo's support website, enter your model number, and read the touchscreen driver from there. Install it and restart.

A cracked or physically damaged screen will not respond even with working drivers. If your screen is visibly broken, disabling the touchscreen in Device Manager stops the phantom touches, but you will need to replace the screen to use it again. A hardware problem cannot be fixed through software settings.

Frequently Asked Questions

Will disabling the touchscreen affect my keyboard or trackpad?

No. The touchscreen is a separate input device. Disabling it does not change how your keyboard, trackpad, or any other hardware works. You can still type and use the trackpad normally.

Can I disable the touchscreen without restarting?

Yes, if you use Device Manager. The change takes effect when ready and you do not need to restart. If you disable it in BIOS, you must restart for the change to take effect.

What if I cannot find the touchscreen in Device Manager?

First, click View and select Show hidden devices to reveal devices that are not currently active. If it still does not appear, your Lenovo may not have a touchscreen, or the driver is not installed. Check your Lenovo's specifications online or contact Lenovo support with your model number.

Is disabling the touchscreen permanent?

No. You can re-enable it the same way you disabled it — either in Device Manager or BIOS. The change is completely reversible.

Will disabling the touchscreen in Device Manager survive a Windows reinstall?

No. If you reinstall Windows, the touchscreen will be enabled again because Device Manager settings do not carry over. If you want the change to survive a reinstall, disable it in BIOS instead.