The simplest way to pair your Logitech keyboard

Most Logitech keyboards connect to an iPad through Bluetooth, which is a wireless connection built into both devices. You turn on the keyboard's Bluetooth mode, then tell your iPad to find and remember it. After that first pairing, the keyboard reconnects automatically whenever you turn it on near your iPad.

The exact steps depend on which Logitech keyboard you have — some use a physical power switch, others use a button you hold down. But the principle is the same: put the keyboard into pairing mode, then open your iPad's Bluetooth settings and select the keyboard from the list.

This guide covers the most common Logitech keyboards for iPad. If you have an older model or a keyboard designed for a specific product line, check the small instruction card that came in the box — it will show you exactly which button to press.

Key Takeaways

  • Turn on your Logitech keyboard and hold down the Bluetooth button (usually marked with a Bluetooth symbol) until the light blinks, which means it is ready to pair.
  • Open Settings on your iPad, tap Bluetooth, and wait for your keyboard to appear in the list of available devices.
  • Tap the keyboard name in the list, and your iPad will confirm the connection — you should see "Connected" next to the keyboard name.
  • Once paired, the keyboard reconnects automatically when you turn it on, so you only do the full pairing process once.
  • If the keyboard does not appear in the list, restart both devices and try again, or check that the keyboard has fresh batteries.

Finding the Bluetooth button on your keyboard

Logitech keyboards have the Bluetooth button in different places depending on the model. On most keyboards designed for tablets, it is a small button with a Bluetooth symbol (looks like a stylized "B" made of dots) somewhere on the top edge or side. On some older models, it might be on the back.

If you cannot find a button with the Bluetooth symbol, look for a button labeled "Connect" or check the instruction card. Some Logitech keyboards also have a physical power switch separate from the pairing button — make sure the keyboard is powered on before you try to pair it.

The keyboard should have an LED light (usually blue or white) that shows its status. When you hold down the Bluetooth button, this light will blink or pulse, which signals that the keyboard is in pairing mode and ready to be found by your iPad.

Turning on Bluetooth on your iPad and finding the keyboard

Open the Settings app on your iPad — it is the gray icon with gears that usually sits on your home screen. Tap "Bluetooth" in the left-hand menu. You should see a toggle at the top that says "Bluetooth" with a switch next to it; make sure that switch is turned on (it will be green or blue).

Once Bluetooth is on, your iPad will start scanning for nearby devices. Wait a few seconds, and your Logitech keyboard should appear in the list under "Other Devices" or "Available Devices." The keyboard will show up with its model name — something like "Logitech Keys-to-Go" or "Logitech Slim Folio."

If the keyboard does not appear after 10 seconds, make sure the keyboard is still in pairing mode (the light should still be blinking). If the light has stopped blinking, hold down the Bluetooth button again for a few more seconds.

Completing the pairing and testing the connection

Tap the keyboard name in the list. Your iPad will connect to it, and you should see the word "Connected" appear next to the keyboard name. This usually happens within a few seconds. Once you see "Connected," the pairing is complete.

To test that everything is working, open a note-taking app like Notes or open an email draft, tap in the text field, and type a few characters on the keyboard. The text should appear on your screen. If it does not, disconnect and try pairing again — sometimes the connection needs a fresh start.

After the first successful pairing, you will not need to repeat these steps. The next time you turn on your Logitech keyboard near your iPad, it will reconnect on its own within a few seconds.

What to do if the keyboard does not appear in the list

If you have held down the Bluetooth button for several seconds and the keyboard still does not show up on your iPad, the most common cause is that the keyboard has run out of battery. Logitech keyboards use either AA batteries or a rechargeable battery pack. Check the battery level — some keyboards have a small LED that shows battery status, or you can try replacing the batteries with fresh ones.

If the batteries are fine, restart both devices. Turn off the keyboard completely (use the power switch if it has one, or just let it sit for 30 seconds). Then go to Settings on your iPad, turn Bluetooth off, wait 10 seconds, and turn it back on. Now try the pairing process again from the beginning.

If the keyboard still does not appear, it may have been paired with another device previously and needs to be "forgotten" by that device first. Check whether the keyboard is currently connected to a phone, computer, or another iPad. If it is, disconnect it from that device, then try pairing with your iPad again.

Reconnecting after the keyboard has been paired

Once your Logitech keyboard has been paired with your iPad, you do not need to go through the full pairing process again. straightforward turn on the keyboard, and it will reconnect automatically. You should see the keyboard appear in your Bluetooth settings with "Connected" next to its name within a few seconds.

If your keyboard does not reconnect automatically, check that Bluetooth is still turned on in your iPad's Settings. Also make sure the keyboard is powered on and has batteries. If the keyboard is on and Bluetooth is on but the connection still does not happen, try turning the keyboard off and back on again.

If you want to use the keyboard with a different iPad or device, you can unpair it by going to Settings, tapping Bluetooth, finding the keyboard name, tapping the "i" icon next to it, and selecting "Forget This Device." After that, the keyboard will be ready to pair with another device.

Frequently Asked Questions

Why does my keyboard keep disconnecting from my iPad?

The most common reason is low battery. Check whether the keyboard's battery indicator shows low power, and replace or recharge the batteries. If the battery is fine, move the keyboard closer to your iPad — Bluetooth has a range of about 30 feet, but walls and other devices can interfere. You can also try unpairing and re-pairing the keyboard to reset the connection.

Can I use one Logitech keyboard with multiple iPads?

Yes, but only one at a time. You can pair the keyboard with multiple iPads, but it will only be connected to one device at a time. To switch, disconnect from the first iPad (turn off Bluetooth or turn off the keyboard), then turn the keyboard back on near the second iPad and it will reconnect to that device.

Do I need to charge my Logitech keyboard, or does it use batteries?

It depends on the model. Some Logitech keyboards use AA or AAA batteries that you replace when they run out. Others have a built-in rechargeable battery that you charge with a USB cable. Check your keyboard's instruction card or the bottom of the keyboard to see which type you have.

What if my iPad does not have Bluetooth?

All modern iPads have Bluetooth built in. If you have an older iPad from before 2011, it may not support Bluetooth, and a wireless Logitech keyboard will not work with it. Check your iPad's model and year in Settings under General, then About — if it is older than iPad 2, Bluetooth may not be available.

Can I use a Logitech keyboard designed for a computer with my iPad?

Most Logitech keyboards with Bluetooth will pair with an iPad, but keyboards designed specifically for computers may not work well because they expect a mouse or trackpad. Logitech makes keyboards designed for iPad that are optimized for touch-based navigation. Check the product packaging or Logitech's website to confirm your keyboard is compatible with iPad.