How to connect your HP Envy 6055e to WiFi
The HP Envy 6055e connects to WiFi through its built-in wireless receiver and the printer's control panel. You'll need your WiFi network name (called the SSID) and password. The whole process takes about five minutes and doesn't require any cables once you've started — the printer finds your network, you enter your password on the printer's screen, and it remembers the connection.
The printer can connect to both 2.4 GHz and 5 GHz networks, though 2.4 GHz is more reliable if you have the choice. If your router is far from the printer or separated by walls, move the printer closer during setup, then move it back once it's connected.
Key Takeaways
- Turn on the printer and open the WiFi menu from the control panel by pressing the wireless icon button.
- Select your network name from the list that appears, then enter your WiFi password using the printer's keypad.
- The printer will confirm the connection and display a checkmark when it successfully joins your network.
- If the printer doesn't find your network, move it closer to your router and try again.
- Once connected, you can print from any device on the same WiFi network without plugging in cables.
Turn on the printer and locate the wireless button
Power on the HP Envy 6055e and wait for the control panel to light up. The control panel is the small screen and buttons on the top front of the printer. Look for a button with a WiFi symbol — it looks like curved lines radiating outward, usually in the upper right area of the buttons. Press this button once.
The screen will show a menu with wireless options. You're looking for an option that says "Wireless" or "WiFi Settings" — tap it with your finger or use the arrow buttons to highlight it and press OK.
Find and select your network from the list
The printer will scan for available networks and display them on the screen. You'll see a list of network names — these are the SSIDs broadcast by routers in range. Find the name of your WiFi network in this list. If you don't know your network name, check the sticker on the back or bottom of your router, or look at the WiFi networks visible on your phone.
Highlight your network name using the arrow buttons on the printer, then press OK. If your network doesn't appear in the list, it may be hidden. In that case, look for an option like "Add Network Manually" or "Other Network" and select it — you'll type your network name by hand instead.
Enter your WiFi password on the printer keypad
After you select your network, the printer will prompt you to enter the password. A keyboard will appear on the screen. Use the arrow buttons to move between letters and numbers, and press OK to select each character. The password is case-sensitive, so capital letters matter — check your router's sticker or your phone's WiFi settings to see the exact password.
As you type, the password will show as dots on the screen for security. Once you've entered the full password, look for a button labeled "OK" or "Connect" and press it. The printer will attempt to join your network.
Confirm the connection is successful
The printer will display a message while it connects — this usually takes 10 to 30 seconds. When the connection succeeds, you'll see a checkmark or a message saying "Connected" on the screen. The WiFi icon on the control panel will also light up or change appearance to show an active connection.
If you see an error message like "Connection Failed" or "Incorrect Password," go back and check that you entered the password correctly. Passwords are straightforward to mistype on a printer keypad. If the password is correct but the connection still fails, restart both the printer and your router — turn them off, wait 30 seconds, and turn them back on.
What to do if the printer can't find your network
If your network doesn't appear in the list of available networks, the printer may be too far from your router. Move the printer to within 15 feet of the router and try the scan again. Walls, metal objects, and other electronics can block the signal, so a direct line of sight works best during setup.
If your router broadcasts a 5 GHz network only, the HP Envy 6055e may not see it — this printer works best on 2.4 GHz. Check your router settings to see if you can enable a 2.4 GHz band, or look for a separate 2.4 GHz network name in the printer's list. Once the printer is connected, you can move it back to its normal location.
Print a test page to confirm everything works
After the printer confirms it's connected, print a test page to make sure the WiFi connection is stable. From your computer or phone, open any document or photo and select "Print." Choose the HP Envy 6055e from the printer list and send the job. The printer should receive the job within a few seconds and begin printing.
If the printer doesn't print, check that your computer or phone is on the same WiFi network as the printer. Some routers have a separate guest network — if you're connected to that instead of the main network, the printer won't receive the print job. Switch to the main network and try again.
Frequently Asked Questions
Do I need to connect the printer to WiFi with a USB cable first?
No. The HP Envy 6055e can connect to WiFi directly from the control panel without any cable. You only need a USB cable if you want to print from a computer that's not on the same network, or if you prefer a wired connection instead of wireless.
What if I forget my WiFi password?
Check the sticker on your router — most routers have the password printed on the back or bottom. If you can't find it, log into your router's settings from a computer or phone by typing the router's IP address into a browser. You can also reset the router to factory settings, though this will erase all your custom settings.
Can I connect the printer to a 5 GHz network?
The HP Envy 6055e supports 5 GHz, but it works more reliably on 2.4 GHz. If your router broadcasts both bands, try connecting to the 2.4 GHz network first. If you only have 5 GHz available, the printer will connect, but you may see slower speeds or dropped connections.
Why does the printer keep disconnecting from WiFi?
Move the printer closer to the router — distance and obstacles like walls weaken the signal. Also check that your router isn't overloaded with too many devices. If the problem continues, restart both the printer and router, and make sure your router's firmware is up to date.
Can I use the printer on WiFi and USB at the same time?
Yes. The printer can be connected to WiFi and have a USB cable plugged in simultaneously. Devices on your network will print wirelessly, and a computer connected by USB can also send jobs. The printer handles both without conflict.