The Kodak Pixpro FZ55 charges through a USB cable connected to any standard power adapter

The Kodak Pixpro FZ55 does not use a separate charging dock or removable battery. Instead, you charge the built-in battery by plugging a USB cable directly into the camera's USB port, then connecting the other end to a power adapter. The camera itself stays in your hands — you do not remove anything or insert it into a separate device.

The USB port is located on the bottom of the camera, next to the tripod mount. You will see a small rectangular opening. The cable that comes in the box is a standard micro-USB cable, the same type used by many phones and tablets from several years ago. If you have lost the original cable, any micro-USB cable will work.

The power adapter can be any USB adapter that outputs at least 500 milliamps (mA). Most phone chargers from the last decade meet this requirement. The camera will charge from a computer's USB port as well, though this is slower than using a wall adapter.

Key Takeaways

  • The Kodak Pixpro FZ55 has a built-in battery that charges through the micro-USB port on the bottom of the camera.
  • You need a micro-USB cable and any standard USB power adapter — the original cable comes in the box, but any micro-USB cable works as a replacement.
  • A full charge takes approximately two to three hours with a standard 1-amp wall adapter.
  • The camera shows charging status through a light on the back: red while charging, green when fully charged.

What the charging light means

While the camera is plugged in, look at the back of the camera near the screen. You will see a small light indicator. A red light means the battery is currently charging. A green light means the battery is fully charged and you can unplug the cable.

If the light does not turn on at all when you plug in the camera, check that the cable is fully inserted into the USB port — it should click slightly. Also verify that the power adapter itself is plugged into a working outlet. If the light still does not appear, try a different USB cable or power adapter to rule out a faulty cable.

Charging time and battery life

A completely empty battery takes roughly two to three hours to reach full charge using a standard 1-amp USB power adapter. If you use a lower-power adapter (such as a 500-milliamp charger), charging will take longer — sometimes four to five hours. Using a computer's USB port instead of a wall adapter also extends charging time.

Once fully charged, the Kodak Pixpro FZ55 battery lasts approximately 150 to 200 photos under normal conditions. Battery life depends on how often you use the flash, the zoom, and the screen brightness. Using the flash for every shot will drain the battery faster than shooting in daylight without flash.

Charging from a computer or power bank

You can charge the camera from any computer with a USB port. Plug the micro-USB cable into a free USB port on your computer (usually on the back or side of the tower, or on the keyboard or monitor). The camera will charge, but more slowly than from a wall adapter — expect four to six hours for a full charge.

Portable power banks with USB ports also work. Make sure the power bank has at least 500 milliamps of output. Higher-capacity power banks (5,000 mAh or larger) will charge the camera several times before the power bank itself needs recharging. This is useful if you are traveling and do not have access to a wall outlet.

Preventing battery problems

The Kodak Pixpro FZ55 battery does not have a memory effect, which means you do not need to fully drain it before charging. You can plug in the camera whenever it is convenient, even if the battery is only half empty. Charging from a partially full battery does not damage the battery or reduce its lifespan.

Avoid leaving the camera plugged in for days after it reaches full charge. Once the light turns green, unplug the cable. Storing the camera with a completely dead battery for months can make the battery difficult to charge later. If you plan to store the camera for more than a few weeks, charge it to about 50 percent and then unplug it.

Keep the USB port clean and dry. If the port gets wet, let the camera dry completely before plugging in the cable. Debris or lint inside the port can prevent the cable from making a good connection, so gently inspect the port occasionally and use a dry cloth to wipe it if needed.

Troubleshooting a camera that will not charge

If the camera does not show a charging light after you plug it in, start with the simplest fixes. Make sure the power adapter is actually plugged into a working outlet — test the outlet with another device like a lamp. Check that the micro-USB cable is fully inserted into the port on the bottom of the camera; it should go in straight and click slightly.

Try a different USB cable if you have one available. Micro-USB cables wear out over time, and a frayed or damaged cable will not charge the camera even if it looks fine. If a different cable works, the original cable is the problem. Also try a different power adapter — borrow one from a phone or tablet if needed. If the camera charges with a different cable and adapter, you have found the faulty part.

If the camera still will not charge with multiple cables and adapters, the USB port itself or the internal battery may be damaged. Contact Kodak support or visit an electronics repair shop. Do not attempt to open the camera or force the cable into the port, as this can cause further damage.

Frequently Asked Questions

Can I use a fast charger or high-power adapter?

Yes. The camera will only draw the power it needs, so a 2-amp or 3-amp adapter will not damage the battery or camera. It will straightforward charge at the same speed as a 1-amp adapter. Fast chargers designed for phones work fine with the Kodak Pixpro FZ55.

How do I know if the battery is actually dead?

A completely dead battery will not power the camera on at all. The screen will stay black even if you press the power button. If the camera turns on but the battery icon shows empty, the battery still has enough charge to run the camera for a short time — you can still take photos, but you should charge it soon.

Can I use the camera while it is charging?

Yes, you can take photos while the camera is plugged in and charging. The cable will be attached to the bottom, so you may find it awkward to hold, but it will not damage the camera or interrupt the charging process.

What if I lost the original USB cable?

Any micro-USB cable will work as a replacement. These cables are inexpensive and widely available at electronics stores, online retailers, and many grocery stores. Make sure you buy a micro-USB cable, not a USB-C or mini-USB cable, as those will not fit the port.

Does the battery drain if I leave the camera unplugged for a week?

The battery will drain slowly even when the camera is off. After one week of sitting unplugged, expect the battery to lose about 10 to 20 percent of its charge. After a month, it may be nearly empty. If you plan to store the camera for an extended period, charge it before putting it away.