The simplest way to pair a Logitech keyboard with your iPad

Most Logitech keyboards connect to an iPad through Bluetooth, which is a wireless connection built into both devices. The process takes about two minutes: you turn on the keyboard, hold down its pairing button until a light blinks, then select it from your iPad's Bluetooth settings. After that first pairing, the keyboard reconnects automatically whenever you turn it on near your iPad.

Some older Logitech keyboards use a small wireless receiver instead of Bluetooth — you plug this receiver into the iPad's charging port using an adapter. This method is less common now, but if your keyboard came with a small USB dongle, that's what you have. The steps below cover both types.

Key Takeaways

  • Bluetooth keyboards pair through your iPad's Settings app and reconnect on their own each time you switch them on.
  • You need to find the pairing button on your specific Logitech model — it's usually on the back or bottom and labeled with a Bluetooth symbol.
  • If your keyboard uses a wireless receiver instead of Bluetooth, you'll need a USB-C or Lightning adapter to plug it into your iPad.
  • Once paired, a Bluetooth keyboard works with any app on your iPad without any extra steps.

Finding the pairing button on your Logitech keyboard

Before you start, locate the pairing button on your keyboard. On most Logitech models, this is a small button on the back or underside of the keyboard, often marked with a Bluetooth symbol (looks like a stylized "B" made of dots). Some keyboards have it near the power switch. Check the bottom of the keyboard first — that's where Logitech usually places it on iPad models.

If you can't find a physical button, your keyboard might have a power switch with multiple positions. On some Logitech keyboards, you switch the power to a middle position labeled "Pairing" or with a Bluetooth symbol. The manual that came with your keyboard will show you exactly where to look. If you don't have the manual, you can find it on Logitech's website by searching for your keyboard model number, which is usually printed on the back.

Pairing a Bluetooth Logitech keyboard step by step

Step 1: Turn on your keyboard. Flip the power switch to the "On" position. If your keyboard has a battery indicator light, it should turn on. Wait a few seconds for the keyboard to power up fully.

Step 2: Press and hold the pairing button. Hold down the pairing button for about three to five seconds until you see the Bluetooth light blink or flash. This tells you the keyboard is in pairing mode and looking for a device to connect to. The light will usually blink blue or white. Don't release the button until the light starts blinking — this is the signal that pairing mode is active.

Step 3: Open Bluetooth settings on your iPad. Go to Settings, then tap Bluetooth. Make sure Bluetooth is turned on — you'll see a toggle switch at the top. Your iPad will start searching for nearby Bluetooth devices.

Step 4: Select your keyboard from the list. Your Logitech keyboard should appear in the "Other Devices" section within a few seconds. It will show the model name, something like "Logitech Keys-To-Go" or "Logitech Slim Folio." Tap on it to connect.

Step 5: Confirm the pairing. Your iPad may ask you to confirm the pairing or enter a code. If a code appears on your screen, type it on the keyboard and press Enter. If no code appears, the pairing is complete. You should see "Connected" next to your keyboard's name in the Bluetooth settings.

What to do if your keyboard uses a wireless receiver

Older Logitech keyboards come with a small USB receiver (a tiny dongle) instead of Bluetooth. If your keyboard came with this receiver, you'll need an adapter to plug it into your iPad. The adapter type depends on your iPad model: newer iPads use USB-C, while older models use Lightning connectors.

Once you have the correct adapter, plug the receiver into your iPad's charging port. The keyboard should connect automatically — there's no pairing button to press. If it doesn't work right away, try turning the keyboard off and back on. If you're not sure which adapter you need, search for your iPad model on Apple's website or ask at an electronics store.

Troubleshooting when your keyboard won't connect

If the keyboard doesn't appear in your Bluetooth list, make sure it's in pairing mode — the light should be blinking. If the light isn't blinking, hold the pairing button longer. Some keyboards need you to hold it for ten seconds or more. Also check that your keyboard has fresh batteries or is fully charged, because a low battery can prevent pairing.

If the keyboard appears in the list but won't connect, try "forgetting" it first. Go to Settings, tap Bluetooth, find your keyboard in the list, tap the information icon next to it, and select "Forget This Device." Then start the pairing process again from step two. This clears out any confused connection attempts and usually fixes the problem.

If your iPad's Bluetooth is off, you won't see any devices. Check that the Bluetooth toggle in Settings is switched on — it should be blue or green. Also make sure your iPad isn't in Airplane Mode, which turns off all wireless connections. You can check this in Settings or by swiping down from the top-right corner of your screen.

Using your keyboard after it's paired

Once your keyboard is connected, you can use it in any app on your iPad — email, documents, web browsers, everything. The keyboard stays connected as long as it's powered on and within about thirty feet of your iPad. When you turn the keyboard off, the connection pauses. The next time you turn it on, it reconnects automatically without any extra steps.

If you want to use the keyboard with a different device, you'll need to pair it again. Most Logitech keyboards can remember multiple devices, so you can switch between an iPad and a laptop by turning the keyboard off and on. Some models have multiple pairing buttons or a switch to choose which device to connect to — check your manual to see if yours has this feature.

Frequently Asked Questions

Can I use a Logitech mouse with my iPad at the same time as the keyboard?

Yes. Pair the mouse through Bluetooth the same way you paired the keyboard. Your iPad will connect to both devices at once. Some Logitech keyboard and mouse bundles are designed to work together, and both will pair to the same iPad without any conflict.

Why does my keyboard keep disconnecting?

A disconnecting keyboard usually means low battery. Replace the batteries or charge the keyboard fully, then try again. If it still disconnects, forget the device in Bluetooth settings and re-pair it. Interference from other wireless devices can also cause drops — try moving away from Wi-Fi routers or other Bluetooth devices.

Do I need to install any software or app to use a Logitech keyboard with my iPad?

No. Logitech keyboards work with iPads through standard Bluetooth — no apps or drivers needed. Your iPad handles the connection automatically once you pair it. Some Logitech keyboards have optional companion apps, but these are not required to use the keyboard.

What if my keyboard is really old and won't pair?

Very old Logitech keyboards may use an outdated wireless standard that newer iPads don't support. If your keyboard is more than ten years old and won't appear in Bluetooth settings, it may not be compatible. Check Logitech's website with your keyboard model number to confirm whether it supports iPad pairing.

Can I pair my Logitech keyboard to multiple iPads?

Yes. Most Logitech keyboards can pair with several devices. To switch between them, turn the keyboard off and back on, or use a pairing button if your model has one. You'll only need to go through the full pairing process once per device — after that, the keyboard remembers each one.