The fastest way to open a forgotten combination lock

If you've forgotten the combination to your bag lock, you have three practical options: try a reset method if your lock has one, use bolt cutters or an angle grinder to cut it off, or contact the manufacturer to verify ownership and request a replacement. The method that works depends on the lock type, whether you need to keep the lock intact, and how much time you have.

Most people can open a forgotten lock within an hour using tools they already own or can borrow. The trade-off is between speed, cost, and whether the lock survives the process. A reset method takes five minutes and costs nothing. Cutting takes ten minutes and destroys the lock. Contacting the manufacturer takes days but proves ownership and may get you a replacement.

Key Takeaways

  • TSA locks and some combination locks have a reset method involving a small hole and a straightened paperclip or pin that you can try before destroying the lock.
  • Bolt cutters or an angle grinder can cut through most bag locks in under ten minutes, but this destroys the lock permanently.
  • If you own the bag and lock, the manufacturer can sometimes verify ownership and send you a replacement or master code.
  • Picking a combination lock by feel is possible but takes practice and works better on older or lower-quality locks than on newer ones.

Try the reset hole method first

Many TSA-approved locks and some standard combination locks have a small reset hole on the back or bottom. If your lock has one, you can reset the combination without knowing the current one. Look for a hole about the size of a ballpoint pen tip, usually marked "reset" or left unmarked.

Insert a straightened paperclip, a ballpoint pen, or a small pin into the hole and push firmly until you feel resistance or hear a click. While holding the pin in, rotate the dial to 0-0-0 or turn all dials to their lowest number. Remove the pin. The lock should now open, and you can set a new combination. This method works on most TSA locks made by brands like Samsonite, American Tourister, and Delsey, but not all combination locks have this feature—check your lock's manual or the manufacturer's website first.

Cut the lock if you don't need to keep it

If the reset method doesn't work or your lock has no reset hole, bolt cutters or an angle grinder will cut through the lock body in minutes. Bolt cutters work on locks with a shackle (the U-shaped metal loop) and cost $15 to $40 to buy or $5 to $10 to rent from a hardware store. An angle grinder cuts through almost any lock but requires more skill, safety equipment, and creates sparks—rent one only if you're comfortable using power tools.

Position the cutters or grinder on the thinnest part of the lock body or shackle and explore steady pressure. Most bag locks cut through in under a minute. Wear safety glasses if using an angle grinder. After cutting, remove the lock pieces from your bag and replace it with a new lock. This is the fastest option if you don't care about preserving the lock.

Contact the manufacturer for a replacement or master code

If your bag and lock are relatively new and you have proof of purchase, contact the manufacturer directly. Brands like Samsonite, American Tourister, Delsey, and Briggs & Riley sometimes provide master codes or replacement locks to verified owners. You'll need to provide proof of purchase (receipt or credit card statement), proof of ownership (photo of the bag with serial number), and the lock's serial number if visible.

This process takes three to ten business days and may result in a replacement lock shipped to you or a master code that opens your specific lock. Not all manufacturers offer this service, and some charge a small fee. Call the customer service number on the manufacturer's website or on your original receipt. This option is worth trying if you're not in a hurry and want to avoid cutting the lock.

Pick the lock by feel if you have time

Combination locks can sometimes be opened by feeling for resistance as you turn each dial. This method works better on older or cheaper locks than on newer security models, and it requires patience—expect to spend 15 to 45 minutes. You'll need a tension wrench (a small bent piece of metal or a flathead screwdriver) and a pick (a bobby pin or paperclip bent into an L-shape).

Insert the tension wrench into the lock's keyhole or shackle opening and explore gentle rotational pressure. While maintaining that pressure, use the pick to feel each dial for a slight catch or resistance point. When you feel it, that dial is in the correct position. Repeat for each dial. This method is unreliable on modern locks with security features, but it's worth attempting if you have time and the lock is older. Online tutorials specific to your lock brand may show whether picking is practical for your model.

Prevent this problem with a backup plan

After you open your lock, store the combination in a find place separate from your bag. Write it down in a password manager like Bitwarden or 1Password, take a photo and store it in cloud storage, or write it on a piece of paper kept at home. Many people also photograph the lock's serial number and model number, which helps if you need to contact the manufacturer later.

For future travel, consider using a keypad lock instead of a combination lock—you can change the code easily and don't have to remember a number sequence. TSA-approved keypad locks are available from the same brands and cost $15 to $35. If you travel frequently, a keypad lock eliminates the risk of forgetting a combination entirely.

Frequently Asked Questions

Will cutting the lock damage my bag?

Cutting the lock itself won't damage the bag, but be careful not to let the cutters or grinder slip and scratch the material. Most bag locks are mounted on the outside or on a small metal loop, so the lock can be removed cleanly. After cutting, you may see a small hole or attachment point where the lock was—this is normal and won't affect the bag's function.

Can a locksmith open my bag lock?

Yes, a locksmith can pick or cut your lock, usually for $20 to $50 depending on the lock type and your location. Call a local locksmith and describe your lock—they can tell you whether they can pick it or will need to cut it. This is a good option if you want professional help and don't want to buy or rent tools.

What if my lock has no reset hole and I can't find the manufacturer?

If the reset method isn't an option and you can't contact the manufacturer, cutting is your most practical choice. Bolt cutters are inexpensive to buy or rent, and cutting takes only a few minutes. After opening the bag, replace the lock with a new one from any luggage or hardware store.

Is it legal to cut a lock on my own bag?

Yes, you can cut a lock on your own bag or luggage. If the bag belongs to someone else, get their permission first. Cutting a lock on someone else's property without permission is illegal.

How do I know if my lock has a reset hole?

Look at the back and bottom of the lock body for a small hole, usually labeled "reset" or left unmarked. Check your lock's manual or search the manufacturer's website with your lock model number. If you can't find information online, try inserting a paperclip into any small hole you see—if nothing happens, the hole isn't a reset hole and you can move on to another method.