The most common reason your Roku TV loses internet is a weak signal between your router and the TV, or the Roku needs to forget and rejoin your network

A Roku TV that won't connect usually sits too far from your router, has interference from walls or other devices, or has stored outdated network information. Before you reset anything, move your router closer to the TV for a test — if it connects when ready, distance or obstacles are the problem. If it still fails, the Roku's memory of your network may be corrupted, and you'll need to clear it and reconnect from scratch.

The steps below cover the most reliable fixes in order. Start with the first one and move down only if the previous step didn't work. Most connections restore at the first or second step.

Key Takeaways

  • Weak WiFi signal is the most common cause — move your router within 20 feet of the TV and away from walls, microwaves, or cordless phones to test.
  • Restart your Roku TV by unplugging it for 30 seconds, then plugging it back in, which clears temporary connection problems.
  • Forget your network on the Roku and reconnect by entering your password again, which fixes outdated or corrupted network memory.
  • Check that your router broadcasts on the 2.4 GHz band — older Roku models cannot use 5 GHz, and some newer ones need you to enable both bands.
  • If the Roku still won't connect after these steps, a factory reset may be necessary, but contact Roku support first to rule out a hardware fault.

Restart your Roku TV and router together

A restart clears temporary glitches that prevent connection. Unplug your Roku TV from the wall outlet and leave it unplugged for 30 seconds. While it's unplugged, also unplug your router for 30 seconds. Plug the router back in first and wait for its lights to stabilize — usually 1 to 2 minutes. Then plug the Roku TV back in.

Once the Roku boots up, go to Settings > Network > About and check whether it shows an IP address. If it does, your connection is working. If the screen still shows "Not connected," move to the next step.

Forget your network and reconnect with your password

Your Roku stores your network name and password in memory. If that stored information becomes corrupted, the TV won't connect even though your password is correct. Forgetting the network and reconnecting forces the Roku to re-enter and re-verify your credentials.

On your Roku remote, press the Home button. Go to Settings > Network > WiFi. You'll see your network name listed. Highlight it and press the Options button (the button with three horizontal lines). Select Forget network. The Roku will disconnect when ready.

Now go back to Settings > Network > WiFi and select your network name from the list. When prompted, enter your WiFi password exactly as it is — uppercase and lowercase letters matter. After you enter it, the Roku should connect within 10 to 15 seconds. Check Settings > Network > About again to confirm you see an IP address.

Check your router's WiFi bands and channel settings

Roku TVs have different WiFi capabilities depending on the model year. Older Roku models (before 2016) only work on the 2.4 GHz band. Newer models work on both 2.4 GHz and 5 GHz, but some default to 5 GHz only, which can cause older devices to disconnect.

Log into your router's settings by opening a web browser on your computer or phone and typing your router's IP address — usually printed on the router itself or in your router's manual. Look for the WiFi settings section, often called "Wireless" or "WiFi." Check whether your network is broadcasting on 2.4 GHz, 5 GHz, or both. If it's set to 5 GHz only, change it to broadcast both bands, or create a separate 2.4 GHz network with a different name. Reconnect your Roku to the 2.4 GHz network.

If you're unsure how to access your router's settings, contact your internet provider — they can walk you through it or make the change remotely.

Move your router closer to the TV and reduce interference

WiFi signal weakens with distance and obstacles. Walls, metal objects, and other wireless devices all interfere. As a test, move your router to within 20 feet of your Roku TV, ideally in the same room and with a clear line of sight. If the TV connects when ready, you've found the problem.

If moving the router permanently isn't practical, consider a WiFi extender or mesh system to boost signal in the room where your TV sits. Mesh systems (like Eero, Netgear Orbi, or TP-Link Deco) replace your single router with multiple units that work together and often perform better than extenders.

Also check what else is near your router: cordless phones, microwaves, and baby monitors all broadcast on the 2.4 GHz band and can jam your WiFi. Moving these devices away from your router or TV can improve connection stability.

Check for Roku software updates

Outdated Roku software sometimes causes connection problems. Go to Settings > System > System update and select Check now. If an update is available, install it and let the TV restart. After the restart, try connecting to your network again.

You can also enable automatic updates so this doesn't happen again. Go to Settings > System > System update > Auto update and turn it on.

Factory reset your Roku TV as a last step

If none of the steps above restore your connection, a factory reset erases all stored settings and network information, then returns the TV to its original state. This fixes deep software problems but also removes any apps you've installed and your login information for streaming services.

Go to Settings > System > Advanced system settings > Factory reset. The TV will ask you to confirm. Select Factory reset everything. The process takes 5 to 10 minutes. When it's done, the Roku will restart and ask you to set up your network connection again, as if it were brand new.

Before you reset, contact Roku support at roku.com/support or call 1-888-667-6487. A hardware fault — a broken WiFi chip, for example — won't be fixed by a reset, and support can tell you whether a replacement is an option.

Frequently Asked Questions

Why does my Roku connect to WiFi but then disconnect after a few minutes?

This usually means weak signal or interference. Your Roku can briefly hold a connection but can't maintain it. Move your router closer, reduce interference from other devices, or check whether your router needs a software update. If the problem persists after moving the router, contact your internet provider to check your router's health.

Can I use a 5 GHz network on my older Roku TV?

No. Roku models from 2015 and earlier only support 2.4 GHz. If your router broadcasts only 5 GHz, you'll need to change your router settings to also broadcast 2.4 GHz, or create a separate 2.4 GHz network. Check your Roku's model number on the back of the TV or in Settings > System > About if you're unsure which band it supports.

What if my Roku connects to WiFi but has no internet?

The Roku is connected to your network but can't reach the internet. Check whether other devices in your home have internet — if they don't, the problem is with your internet service, not the Roku. If other devices work fine, restart your Roku and router together as described above. If that doesn't work, go to Settings > Network > About and check your DNS settings — if they show 0.0.0.0, your router isn't assigning a DNS address, and you may need to contact your internet provider.

Do I need to enter my WiFi password every time I restart my Roku?

No. Once you've entered your password and the Roku connects, it stores that information and reconnects automatically when you turn the TV back on. If you're asked for your password every time, your Roku isn't saving the connection properly — try forgetting the network and reconnecting as described above.