Start with the simplest fixes first
Most iPad WiFi problems come from one of three things: the WiFi is actually off on your iPad, your router needs to be restarted, or your iPad has forgotten the network password. Before you assume something is broken, try these in order: turn WiFi off and back on in Settings, restart your router by unplugging it for 30 seconds, and forget the network then reconnect by entering the password again. These three steps fix the problem about half the time.
If none of those work, the issue is usually that your iPad is too far from the router, something is blocking the signal, or your router needs an update. Distance and obstacles matter more than people expect — WiFi weakens through walls, especially if they contain metal or thick insulation. Moving your iPad closer to the router or moving the router to a more central location in your home often solves the problem when ready.
Key Takeaways
- Turn WiFi off and on in Settings, restart your router by unplugging it for 30 seconds, and forget then rejoin the network — these three steps fix most connection problems.
- Distance and physical obstacles like walls weaken WiFi signal, so moving your iPad or router to a more central location often restores the connection.
- Check that your router's firmware is current by logging into its admin page, usually at 192.168.1.1 or 192.168.0.1 in a web browser.
- If your iPad still will not connect after these steps, restart it completely by holding the power button until the shutdown slider appears, then turn it back on.
- Forgetting the network and reconnecting forces your iPad to re-enter the password, which catches typos and fixes corrupted network settings.
How to turn WiFi off and back on
Open Settings on your iPad and tap WiFi. You will see a toggle switch next to the word WiFi — it should be green if WiFi is on. Tap it once to turn WiFi off, wait 10 seconds, then tap it again to turn it back on. Your iPad will search for available networks and display them in a list below the toggle.
This straightforward restart clears temporary glitches in your iPad's WiFi hardware without affecting anything else. It takes less than a minute and works often enough that it should always be your first step.
Restart your router the right way
Unplug the power cable from the back of your router — the box that broadcasts your WiFi signal. Wait 30 seconds, then plug it back in. The lights on the front will blink as it restarts. Wait another 30 to 60 seconds for it to fully boot up, which you will know has happened when the lights stop blinking and settle into a steady pattern.
Restarting your router clears its memory and resets its connection to your internet service provider. This fixes problems where the router has gotten confused about which devices are on the network or has lost its connection to the internet entirely. If your iPad connects to the WiFi name but shows no internet, a router restart is often what fixes it.
Forget the network and reconnect with the password
Go to Settings, tap WiFi, find your network name in the list, and tap the information icon (a circle with an "i" in it) next to it. Tap "Forget This Network" and confirm. Your iPad will remove all stored information about that network, including the password.
Now tap your network name again from the list. Your iPad will ask you to enter the password. Type it carefully — passwords are case-sensitive, meaning capital letters and lowercase letters are different. If you are not sure what the password is, check the back or bottom of your router, where it is usually printed on a sticker. Once you enter the password correctly, tap "Join" and wait 10 seconds for the connection to establish.
Forgetting and rejoining the network forces your iPad to re-enter the password from scratch, which catches typos and fixes corrupted network settings that prevent connection.
Check the distance between your iPad and router
WiFi signal weakens with distance and is blocked by walls, especially those containing metal studs or thick insulation. If your iPad is in a bedroom on the opposite side of your home from the router, moving it closer to the router is the fastest way to test whether distance is the problem. If the iPad connects when ready when moved closer, you know the issue is signal strength.
The permanent fix is to move your router to a more central location in your home — ideally elevated and away from walls. A router in a hallway or on a shelf in a central room reaches more of your home than one hidden in a closet or corner. If moving the router is not practical, a WiFi extender or mesh system can boost signal to distant areas, though that is a separate purchase.
Update your router's firmware
Your router runs software called firmware that controls how it works. Outdated firmware can cause connection problems. To check for updates, open a web browser on any device connected to your WiFi and type 192.168.1.1 or 192.168.0.1 into the address bar. You will see a login page asking for a username and password — these are usually printed on the back of your router and are different from your WiFi password.
Once logged in, look for a section called Administration, System, or Settings. Find an option for Firmware Update or Software Update and check if a newer version is available. If one is, follow the on-screen instructions to install it. Do not unplug the router during an update — let it complete fully, which usually takes 5 to 10 minutes.
If you cannot find the firmware update section or do not remember the router login password, contact your internet service provider — they can often push updates to your router remotely.
Restart your iPad completely
If the steps above have not worked, restart your iPad entirely. The method depends on which iPad model you have. For most recent iPads, press and hold the top button and either volume button until the power-off slider appears on the screen. Drag the slider to turn off your iPad, wait 10 seconds, then press and hold the top button again until the Apple logo appears.
For older iPad models with a home button, press and hold the top button until the power-off slider appears, then drag it to shut down. Wait 10 seconds and press the top button again to turn it back on. A complete restart clears your iPad's memory and resets its connection systems, which fixes problems that smaller restarts do not.
Frequently Asked Questions
Why does my iPad show the WiFi network but say it cannot connect?
Your iPad can see the network but cannot authenticate with it, usually because the password is wrong or the router has too many devices connected. Try forgetting the network and reconnecting with the password. If that does not work, restart your router and try again. If the problem persists, log into your router's admin page and check how many devices are connected — most home routers handle 20 to 50 devices well, but performance drops if you have more.
My iPad was connected yesterday but is not today — what changed?
Your router may have restarted on its own, your WiFi password may have been changed, or your iPad may have drifted out of range. Start by restarting your router. If that does not work, check whether other devices can connect — if they cannot, the problem is with your router or internet service, not your iPad. If other devices connect fine, forget the network on your iPad and rejoin it.
Does my iPad need to be updated for WiFi to work?
Rarely, but it is worth checking. Go to Settings, tap General, then tap Software Update. If an update is available, connect to WiFi first (or use cellular if you have it), then install the update. However, most WiFi problems are not caused by iPad software — they are caused by router issues or signal problems, so update your router's firmware first.
What if I have tried everything and my iPad still will not connect?
The problem may be with your router itself or your internet service. Try connecting a different device — a phone, laptop, or tablet — to the same WiFi network. If other devices connect without trouble, your iPad may have a hardware problem and should be checked by Apple Support. If no devices can connect, contact your internet service provider to check whether your internet connection is working.
Can I reset my iPad's network settings without losing my data?
Yes. Go to Settings, tap General, then tap Reset. Choose "Reset Network Settings" — this removes all saved WiFi networks and passwords but does not delete your photos, apps, or files. After the reset, your iPad will restart and you can rejoin your WiFi network by entering the password again. This is a stronger fix than forgetting a single network and works when other steps have not.