Start with the simplest cause first

Most PCs that lose internet connection are not broken — they are just disconnected from the network you set up. Before you restart anything, check whether your PC can even see your wireless network. On Windows, click the network icon in the bottom right corner of your taskbar. On Mac, click the Wi-Fi icon in the top right corner. If your network name does not appear in the list, your PC's wireless radio is either off or too far from your router.

If you see your network name but cannot connect to it, the password you entered is probably wrong. Passwords are case-sensitive, which means capital letters matter. If you are not sure what password you set, you can find it on your router itself — look for a sticker on the back or bottom that says "Wi-Fi Password" or "Network Key". Write it down exactly as shown, including capitals and numbers, and try again.

If your PC connects to the network but still has no internet, the problem moved one step deeper. Your PC is talking to your router, but your router is not talking to the outside world. This is where the next steps come in.

Key Takeaways

  • Check whether your PC can see your wireless network at all — if not, your wireless radio is off or you are out of range.
  • If your PC connects to the network but has no internet, restart your router by unplugging it for 30 seconds, then plugging it back in.
  • If restarting the router does not work, check whether your modem has power and whether the cables from your wall outlet are plugged in firmly.
  • Forgetting the network and reconnecting from scratch fixes most connection problems that survive a router restart.
  • If nothing works, contact your internet provider — the problem is likely on their end, not yours.

Restart your router the right way

A router restart fixes most internet problems because it clears out the router's memory and forces it to reconnect to your internet provider. Do not just turn it off and on with the power button. Instead, unplug the power cable from the back of the router, wait 30 seconds (count them out), then plug it back in. This is called a hard reset and it works better than a soft restart.

While the router is restarting, you will see lights on the front blinking. Wait until they stop blinking and settle into a steady pattern — usually one or two lights staying on. This takes about two to three minutes. Once the lights are steady, try connecting your PC to the network again. If you still have no internet, move to the next step.

Check your modem and cables

Your modem is the device that connects your home to your internet provider. It is usually a separate box from your router, though some newer units combine both into one device. If your modem is separate, it sits between your router and the wall outlet where the cable or fiber line comes in.

Look at the modem and check two things. First, make sure it has power — you should see at least one light on the front. If it is completely dark, the power cable may be loose. Unplug it, wait five seconds, and plug it back in. Second, check the cable that runs from the wall outlet into the modem. It should be plugged in firmly on both ends. If it is loose, push it in until you hear or feel a click.

Once you have checked the modem, restart it the same way you restarted the router: unplug it for 30 seconds, then plug it back in. Wait for the lights to settle before testing your internet again.

Forget the network and reconnect

Sometimes your PC remembers old or corrupted information about your network, and this prevents it from connecting properly even though the network itself is fine. The fix is to forget the network completely and reconnect from scratch.

On Windows, go to Settings, then Network & Internet, then Wi-Fi. Click "Manage known networks" and find your network name in the list. Click it and select "Forget". Now go back to the Wi-Fi list, find your network name again, click it, and enter your password. On Mac, go to System Settings, then Wi-Fi, click the "i" icon next to your network name, and select "Forget This Network". Then reconnect by selecting it from the Wi-Fi menu and entering your password.

Check whether your PC's wireless is actually on

Some PCs have a physical switch or button that turns the wireless radio on and off. On laptops, this is often a key combination — look for a key with a wireless symbol and press it while holding Fn. On some older laptops, there is a physical switch on the side or front. If your wireless is off, turning it on will when ready solve the problem.

You can also check the wireless status in your system settings. On Windows, go to Settings, then Network & Internet, then Wi-Fi and make sure the toggle is turned on. On Mac, go to System Settings, then Wi-Fi and make sure Wi-Fi is on. If the toggle is already on but you still cannot see networks, restart your PC — sometimes the wireless driver needs a fresh start.

Move closer to your router

Wireless signals weaken with distance and are blocked by walls, metal, and water. If your PC is far from your router or in a different room with thick walls between them, the signal may be too weak to connect. Try moving your PC closer to the router — even just 10 feet closer can make a difference. If the connection works from close by, the problem is signal strength, not your PC or router.

If you need internet in a room far from your router, you have two options. You can move the router to a more central location in your home, or you can add a Wi-Fi extender — a device that picks up your router's signal and rebroadcasts it to reach farther. Extenders are inexpensive and work well for covering dead zones.

Contact your internet provider if nothing else works

If your PC connects to the network, your router and modem are powered on and restarted, and you still have no internet, the problem is likely on your provider's end. Your router and modem are doing their job correctly — they just have nothing to pass along to your PC.

Before you call, write down the lights you see on your modem. Most modems have a light labeled "Internet" or "Online" that should be solid green or blue when everything is working. If that light is off, red, or blinking, tell your provider what you see. They can often diagnose the problem from that information alone. Have your account number ready and be prepared to describe what you have already tried.

Frequently Asked Questions

Why does my PC connect to the network but show "no internet access"?

Your PC is talking to the router but the router is not connected to your internet provider. Restart the modem first, then the router, and wait three minutes for both to fully come back online. If that does not work, check that the cable from the wall outlet is plugged firmly into the modem.

My PC was working yesterday but stopped today. What changed?

Something interrupted the connection between your modem and your provider — usually a power outage, a loose cable, or a problem on the provider's network. Restart both your modem and router. If you had a power outage, make sure both devices are plugged in and powered on. If restarting does not work, contact your provider to ask if there is an outage in your area.

Can I fix this without restarting my router?

You can try forgetting the network and reconnecting, or moving closer to the router. But a full restart of both the modem and router fixes about 80 percent of connection problems. It takes three minutes and is worth doing before you try anything else.

What if my PC connects fine but the internet is just slow?

Slow internet is different from no internet. Check how many devices are connected to your network — each one uses bandwidth. If many devices are streaming or downloading, your PC will be slow even though it is connected. Move your PC closer to the router to get a stronger signal, which can improve speed. If you are the only one using the network and it is still slow, contact your provider.

Do I need to change any settings on my PC to fix this?

No. Your PC's network settings are usually correct by default. The problem is almost always that the PC cannot reach the router, the router cannot reach the modem, or the modem cannot reach your provider. Restart those devices first. Only change settings if you are sure you know what you are doing, because wrong settings can make the problem worse.