Your internet slowed down because something changed on your network or with your connection
A sudden drop in speed almost always points to one of three things: a device hogging bandwidth, interference blocking your signal, or a problem between your modem and your internet provider. The good news is that you can test each one yourself in about fifteen minutes, and most fixes take less than a minute.
Start by checking your actual speed, not just how it feels. Open a browser, go to speedtest.net, and run a test. Write down the number. Then restart your modem — unplug it for thirty seconds, plug it back in, and wait two minutes for it to fully boot. Run the test again. If the speed came back, something on your network was stuck and the restart cleared it. If it stayed slow, move to the next step.
Key Takeaways
- A sudden slowdown usually means either a device using too much bandwidth, wireless interference, or a problem between your modem and your provider's network.
- Restarting your modem clears temporary glitches and takes two minutes — do this first before troubleshooting anything else.
- Check which devices are connected and using data by logging into your router's admin panel, where you can see bandwidth use in real time.
- Move your router away from microwaves, cordless phones, and thick walls, or switch to the 5 GHz band if your devices support it.
- If speed stays low after these steps, contact your provider and tell them your modem's signal levels — they can see if the problem is on their end.
Check what devices are actually using your bandwidth
One device streaming video, downloading files, or running updates can drag down everyone else's speed. Log into your router's admin panel to see what is connected and how much data each device is using. Most routers use 192.168.1.1 or 192.168.0.1 as the address — type it into your browser's address bar. Your router's label has the exact address and the login password if you have not changed it.
Once you are in, look for a section called "Connected Devices," "Device List," or "Bandwidth Monitor." You will see every device on your network and how much data it is pulling right now. If one device shows a much higher number than the others, that is your culprit. A computer running Windows Update, a phone backing up to the cloud, or a streaming device downloading content can all tank your speed for everyone else.
Disconnect the heavy user temporarily — either unplug it or turn off its Wi-Fi — and run your speed test again. If speed bounces back, you found the problem. You can then decide whether to let that device finish what it is doing at a slower time, or to upgrade your internet plan if you regularly have multiple heavy users at once.
Look for wireless interference near your router
Your Wi-Fi signal travels on the same radio frequency as microwaves, cordless phones, baby monitors, and some older wireless speakers. If any of these are running near your router, they can jam the signal and slow your connection, especially if your router is in a kitchen or bedroom.
Move your router away from these devices, or move the interfering device away from the router. Even a few feet can make a difference. If you cannot move things around, try switching your router to the 5 GHz band instead of 2.4 GHz — 5 GHz is faster but does not travel as far, and fewer household devices use it, so interference is less likely. Check your router's settings or the manual to see how to switch bands. Some routers let you do this from the admin panel; others have a button on the back.
Thick walls, metal filing cabinets, and aquariums also block Wi-Fi. If your router is in a closet or behind a cabinet, moving it to an open, central location can noticeably improve speed. The higher you place it, the better the signal spreads through your home.
Restart your modem the right way
A modem that has been running for weeks without a restart can develop temporary glitches that slow your connection. The restart is straightforward but has to be done correctly. Unplug the modem's power cable from the wall outlet — not just from the modem itself. Wait thirty seconds. Plug it back in and wait two full minutes for all the lights to stop blinking and settle into a steady pattern.
During those two minutes, the modem is reconnecting to your provider's network and downloading any firmware updates. If you turn it back on too soon, the connection may not fully establish. Once the lights are steady, run your speed test again. Many slowdowns clear up after a proper restart because the modem's memory gets cleared and the connection resets.
Check your modem's signal levels if speed stays low
If your speed is still slow after restarting and checking for interference, the problem may be between your modem and your provider's network. Most modems have a status page that shows signal strength and error rates. Open your browser and go to 192.168.100.1 (this is the modem's address, different from the router). Look for a section called "Status" or "Signal Levels."
You will see numbers for "Downstream Power," "Upstream Power," and "Signal to Noise Ratio." Write these down. The exact ranges depend on your modem model, but generally downstream power should be between -7 and +7 dBmV, upstream power between 37 and 55 dBmV, and signal to noise ratio above 30 dB. If your numbers are far outside these ranges, your modem is struggling to hear the provider's signal.
Call your internet provider and tell them your modem's signal levels. They can check their end of the line and see if a cable is loose, if there is damage to the line coming into your house, or if the neighborhood network is overloaded. Providing these numbers saves them from having to walk you through basic troubleshooting and gets you to a real solution faster.
Rule out provider outages and plan changes
Before assuming your equipment is broken, check whether your provider is having an outage. Go to their website or call their support line and ask. Outages are usually temporary and affect whole neighborhoods at once. If an outage is happening, there is nothing you can fix on your end — you just have to wait.
Also check your bill or account online to see if your plan changed. Some providers automatically downgrade plans after a promotional period ends, or you may have accidentally switched to a slower tier. If your plan shows a lower speed than you remember, contact the provider and ask what happened. Switching back to your original plan usually takes one phone call.
When to replace your modem or router
If you have tried all these steps and speed is still slow, your modem or router may be failing. Modems typically last five to seven years before they start dropping connections or losing speed. Routers last about the same. If yours is older than that and you have ruled out everything else, replacing it is usually cheaper than paying for a faster plan you do not actually need.
Before you buy, check with your provider about which modems they support. Some providers rent modems, and some require you to buy your own. If you rent, switching to a newer model is often free or low-cost. If you own yours, you can buy a replacement online — look for one that supports your provider's network type (cable, fiber, or DSL) and has good reviews for reliability.
Frequently Asked Questions
Why is my internet slow only at certain times of day?
Your neighborhood's network is probably congested during peak hours — usually evenings between 6 and 10 p.m. when many people are streaming or gaming. This is a provider-side issue you cannot fix, but it tells you that your plan may not have enough bandwidth for your household's actual use. Contact your provider about upgrading to a faster plan if this happens regularly.
Can a virus or malware slow down my internet?
Malware can use bandwidth in the background, but it is less common than a device running a large read or update. Run a malware scan with Windows Defender (built into Windows) or Malwarebytes to be sure. If malware is present, removing it may restore speed, but check your connected devices first since that is the more likely cause.
Does restarting my router erase my Wi-Fi password?
No. A normal restart — unplugging the power for thirty seconds — keeps all your settings. A factory reset would erase everything, but that requires holding a button on the back for ten seconds. If you only unplug and plug back in, your password and network name stay the same.
What speed should I actually be getting?
Check your internet bill or log into your provider's website to see what plan you are paying for. That number is your promised speed. Run speedtest.net a few times at different times of day. You should consistently get close to that number. If you are getting significantly less, contact your provider with your test results.
Is it better to use Wi-Fi or a wired connection?
A wired connection (ethernet cable from modem to computer) is always faster and more stable than Wi-Fi because there is no interference or distance loss. If you are doing something that needs maximum speed — video calls, large downloads, online gaming — plug in with a cable. For everyday browsing and streaming, Wi-Fi is fine if your router is in a good location.