Find your printer's IP address through your router's admin panel

The fastest way to locate your printer's IP address is to log into your router and look at the connected devices list. Open a web browser, type your router's IP address (usually 192.168.1.1 or 192.168.0.1), and enter your admin username and password. Look for a section called "Connected Devices," "DHCP Clients," or "Device List" — your printer will appear there with its assigned IP address next to its name.

If you do not know your router's IP address, open Command Prompt on Windows and type ipconfig, then look for "Default Gateway." On Mac or Linux, open Terminal and type netstat -nr | grep default to find the same information. The number you see is your router's address.

This method works regardless of your printer's brand or operating system, because the information lives on your router, not on the printer itself. It also shows you the exact IP your printer is using right now, which matters if your printer's address changes when it restarts.

Key Takeaways

  • Your router's admin panel shows every connected device, including your printer, along with its current IP address.
  • Windows users can find their router's address by typing ipconfig in Command Prompt and looking for "Default Gateway."
  • Mac and Linux users can type netstat -nr | grep default in Terminal to locate the router's address.
  • Your printer's IP address may change if you restart the printer or router, so check the router's device list rather than relying on a number you wrote down weeks ago.

Check your printer's built-in display or settings menu

Most printers show their own IP address on a small screen or touchscreen built into the device. Look for a menu button, settings icon, or information button on the printer's control panel. Navigate to "Network Settings," "TCP/IP," or "Device Information" — the exact name depends on your printer's brand and model. The IP address will be displayed there, often labeled as "IPv4 Address" or straightforward "IP Address."

If your printer has no screen, check the printer's manual or the manufacturer's website for the model number (usually printed on the back or inside the access panel). Search for "[model number] default IP address" to find what address the printer uses when it first ships from the factory. Many printers start at 192.168.1.100 or 192.168.0.100, though this varies.

This method is useful if your router's admin panel is difficult to access or if you want to confirm the address the printer itself believes it has. However, if your printer restarts or your router reassigns addresses, the number on the printer's screen may become outdated within seconds.

Use your operating system's network tools to scan for the printer

On Windows, open Settings, go to Devices, then Printers & Scanners, and click on your printer's name. Select "Printer Properties" and look for the "Ports" tab — the IP address appears in the port name, usually formatted as "IP_[address]." This works only if Windows has already detected the printer on your network.

On Mac, open System Settings, go to General, then Printers & Scanners, and click your printer's name in the list. Click "Supply Levels" or look for a button labeled with an "i" icon — some printer models display the IP address here. If not, right-click the printer name and select "Show Info" to see network details.

On Linux, open a terminal and type nmap -p 9100 192.168.1.0/24 (replacing the first three numbers with your network's range, found via ifconfig). This scans your network for devices listening on the printer port and shows their IP addresses. The command takes 10 to 30 seconds to complete.

Print a network configuration page directly from the printer

Many printers can print a page that lists their own network settings, including the IP address. Look for a button on the printer labeled "Info," "Settings," "Menu," or a gear icon. Navigate to "Print Network Configuration," "Print Settings," or "Network Status Page" — the exact wording depends on the brand. Press the button and the printer will output a page showing its IP address, MAC address, and other network details.

This page is useful because it shows not only the IP address but also whether the printer is using DHCP (dynamic addressing, which can change) or a static address (which stays the same). If the page shows "DHCP: On," the IP address may change when the printer restarts. If it shows "DHCP: Off" or lists a static IP, that address will remain stable.

Keep this printed page near your printer or in a drawer. It serves as a reference if you need to reconnect the printer later, and it shows you the printer's MAC address, which is useful if you need to reserve a fixed IP address in your router.

Assign a static IP address so it does not change

If your printer's IP address keeps changing, the problem is that your router is using DHCP to assign addresses automatically. You have two options: reserve an address in your router, or set a static IP directly on the printer.

To reserve an address in your router, log into the admin panel, find the DHCP settings or "Reserved IP" section, and enter your printer's MAC address (found on the network configuration page you printed). Assign it a fixed address like 192.168.1.100. From that point forward, your router will always give that address to your printer, even if the printer restarts.

To set a static address on the printer itself, go to the printer's network settings menu, find "TCP/IP" or "IPv4 Settings," and change from "DHCP" to "Static" or "Manual." Enter an IP address (use something like 192.168.1.100 to avoid conflicts), a subnet mask (usually 255.255.255.0), and a gateway address (your router's IP). Save the settings and restart the printer. The address will now stay the same until you change it again.

Troubleshoot if the printer does not appear in your router's device list

If your printer is not showing up in your router's connected devices, the printer is either not connected to the network or is connected to a different network than your computer. First, check that the printer is powered on and that its network light is lit (usually a small LED on the back or side). Restart the printer and wait 30 seconds for it to reconnect.

Next, verify that the printer is on the same network as your computer. If your router broadcasts two networks — one labeled with your network name and another with the same name plus "-5G" — make sure both your computer and printer are on the same one. Some older printers do not support 5GHz networks and will only connect to 2.4GHz.

If the printer still does not appear, try connecting it with an Ethernet cable instead of Wi-Fi. Plug a network cable directly from your router to the printer's Ethernet port (if it has one). This bypasses Wi-Fi connection problems and lets you see the printer's IP address in your router's device list. Once you confirm the IP address this way, you can switch back to Wi-Fi if needed.

Use manufacturer tools if your printer has a mobile app or web interface

Many printer brands offer mobile apps or web-based setup tools that show the printer's IP address. HP printers work with the HP Smart app, Canon with Canon PRINT, Epson with Epson iPrint, and Brother with Brother iPrint&Scan. read the app on your phone or computer, let it search for printers on your network, and tap the printer's name — the app usually displays the IP address in the device details.

Some printers also have a web interface you can access directly. Once you know the printer's IP address (from any of the methods above), type it into a web browser's address bar — for example, http://192.168.1.100 — and you will see the printer's settings page. This page shows network status, ink or toner levels, and allows you to change network settings without touching the printer itself.

These tools are convenient if you use the printer frequently, because they let you check status and change settings from anywhere on your network. However, they require the printer to be powered on and connected to the network at the time you use them.

Frequently Asked Questions

Why does my printer's IP address keep changing?

Your router is assigning a new address each time the printer restarts because DHCP is enabled. To fix this, reserve a static IP in your router's admin panel using the printer's MAC address, or set a static address directly on the printer's network settings menu. Either method keeps the address the same permanently.

What is the difference between a printer's IP address and its MAC address?

An IP address is the printer's temporary network location (like a street address), while a MAC address is a permanent hardware identifier (like a serial number). You use the IP address to connect to the printer, and the MAC address to reserve that IP in your router so it does not change.

Can I find my printer's IP address if it is not connected to the network?

No. The IP address only exists when the printer is powered on and connected to your network. If the printer is off or disconnected, you can only find the default factory address in the manual or on the manufacturer's website.

What should I do if my printer's IP address conflicts with another device?

Log into your router and either reserve a different static IP for the printer, or restart your router to force it to reassign addresses. If conflicts keep happening, set a static address on the printer itself rather than relying on the router's DHCP assignment.

Is it safe to access my printer through its web interface?

Yes, if your printer is on your home network behind your router's firewall. The printer's web interface is only accessible from devices already connected to your network. Do not forward the printer's port to the internet or expose it outside your home network, as that creates a security risk.