Your Roku's IP address is printed on the Settings screen, visible in the network menu, or found through your router's device list

The IP address is a number that identifies your Roku on your home network — something like 192.168.1.45. You need it to troubleshoot connection problems, access your Roku remotely, or configure advanced network settings. The fastest way to find it is directly on the Roku itself, but if your Roku won't turn on or respond, your router can tell you the same information.

Unlike a phone number that stays the same, your Roku's IP address can change over time, especially if you restart the device or your router. That is normal and expected. Write down the address when you find it, but do not be surprised if it is different the next time you look.

Key Takeaways

  • The quickest way to find your Roku's IP address is through Settings > System > About on the Roku remote, where it displays under Network.
  • If your Roku is unresponsive, log into your router's admin panel and look for the Roku device in the connected devices list to see its IP address there.
  • Your Roku's IP address can change after a restart or power loss, so it is not a permanent identifier like a serial number.
  • Knowing your Roku's IP address lets you restart it remotely, diagnose streaming problems, or access the web interface for advanced settings.

Finding the IP address through your Roku's Settings menu

This is the method that works when your Roku is powered on and responding to the remote. Pick up your Roku remote and press the Home button to go to the main screen. From there, navigate down to Settings — it is usually near the bottom of the menu.

Once you are in Settings, scroll down and select System. Inside System, look for an option called About (some older Roku models call it Device Information). Open that menu and scroll through the information displayed. Your IP address appears under the Network section, listed as something like "IP Address: 192.168.1.45". Write this down or take a photo of the screen.

If you cannot find the About or Device Information option, your Roku model may display network information in a different location. Try looking in Settings > Network instead, where some models show the IP address directly without going through System first.

Finding the IP address through your router if the Roku is offline

If your Roku will not turn on, will not respond to the remote, or is disconnected from the network, you can find its IP address through your router instead. Open a web browser on your computer or phone and type your router's IP address into the address bar — this is usually 192.168.1.1 or 192.168.0.1, but check the sticker on the back of your router if neither works.

Log in with your router's username and password (also on the sticker, or in the manual that came with it). Once you are logged in, look for a section called Connected Devices, Device List, or DHCP Clients — the exact name varies by router brand. This page shows every device connected to your network, including your Roku. Find the Roku in the list by its name or model number, and the IP address appears next to it.

If you have multiple Roku devices, the router lists them separately. Look for the model name or serial number to identify which one is which. Write down the IP address for the Roku you need to troubleshoot.

Why the IP address changes and when it matters

Every time your Roku restarts or loses power, your router assigns it a new IP address from a pool of available numbers. This is called DHCP, and it is how most home networks work. The address you wrote down today might be different tomorrow, which is why you should not rely on it as a permanent reference.

For most people, this does not matter — you use the Roku remote to control it, and the IP address stays hidden in the background. But if you are troubleshooting a network problem or trying to access the Roku's web interface, you need the current address. Check the Settings menu again rather than using an old address you saved.

If you need the IP address to stay the same for technical reasons (like setting up port forwarding or a static route), you can assign a static IP address through your router's settings. This tells the router to always give that Roku the same number. The steps vary widely by router brand, so check your router's manual or support page for instructions.

What to do with the IP address once you have it

Knowing your Roku's IP address opens up a few troubleshooting options. You can type the address into a web browser (like http://192.168.1.45) to access the Roku's web interface, which shows network diagnostics, installed channels, and system logs. This is useful when the remote is not working or you need detailed information about why the Roku cannot connect to the internet.

Some network tools also let you ping the IP address — a command that checks whether the device is reachable on the network. On Windows, open Command Prompt and type ping 192.168.1.45 (using your actual IP address). On Mac or Linux, open Terminal and type the same command. If the Roku responds, you know it is connected to the network even if it is not displaying anything on the TV.

The IP address is also what you need if you want to restart the Roku remotely through your router or access it from outside your home network using a VPN. For most everyday use, though, the remote is all you need — the IP address is a tool for when something goes wrong.

Roku devices with no network connection

If your Roku has never connected to the network, it will not have an IP address at all. The Settings menu will show "Not connected" under Network, and the router's device list will not include it. In this case, you need to set up the network connection first before you can find an IP address.

Go to Settings > Network and select your Wi-Fi network from the list. Enter the password and wait for the Roku to connect. Once it shows "Connected" in the Network menu, go back to About and the IP address will appear. If the Roku still will not connect, check that you entered the password correctly and that your Wi-Fi network is broadcasting its name (SSID) — some routers have this turned off by default.

Frequently Asked Questions

Can I change my Roku's IP address manually?

Not through the Roku itself — the device does not have an option to set its own IP address. You can assign a static IP through your router's settings, which tells the router to always give that Roku the same number. Check your router's manual for where to find the DHCP or static IP settings.

What if I see multiple IP addresses in the Settings menu?

You are likely seeing both the IPv4 address (the standard one like 192.168.1.45) and the IPv6 address (a longer format). For troubleshooting and most purposes, use the IPv4 address — it is the one that works with your home network and web browser.

Does my Roku's IP address affect streaming quality or speed?

No. The IP address is just an identifier on your network. Streaming quality depends on your internet speed, Wi-Fi signal strength, and network congestion — not on what number the router assigned to the Roku.

Why does my Roku show a different IP address each time I check?

Your router is reassigning the address each time the Roku restarts or reconnects. This is normal. If you need it to stay the same, set up a static IP address in your router's settings, or restart the Roku less frequently.

Can someone outside my home use my Roku's IP address to access it?

Not unless you have specifically set up port forwarding or remote access through your router. The IP address only works on your local network. If you are concerned about security, do not enable remote access unless you need it, and change your router's default password.