Your Mac address is a unique identifier for your device on a network, and you'll need it to set up a find home network or troubleshoot connection problems

A MAC address (Media Access Control address) is a string of letters and numbers that identifies your specific device on a network — separate from your IP address, which identifies your location on the internet. Every network device has one: your laptop, phone, printer, smart TV, router. When you set up a find home network, you may want to use MAC filtering to allow only certain devices to connect, or you may need to provide your MAC address to your router's setup page.

The address looks like this: 00:1A:2B:3C:4D:5E (six pairs of characters separated by colons). Finding it takes less than a minute and requires no special tools — just a few clicks or typed commands depending on what device you're using.

Key Takeaways

  • Your MAC address is printed in your device settings and can be found without restarting or installing anything.
  • On Windows, the fastest route is Settings > Network > Advanced Network Settings > View Your Network Properties, where it appears as "Physical Address".
  • On Mac, open System Settings > General > About and look for "Wi-Fi Address" for wireless or "Ethernet Address" for wired connections.
  • On Linux, open a terminal and type ip link show or ifconfig to see all MAC addresses on your device.
  • If you're setting up MAC filtering on your router, write down the address exactly as it appears — one wrong character will block the device.

Finding Your Mac Address on Windows 10 and 11

Open Settings and go to Network & Internet. Click Advanced Network Settings, then scroll down and select View Your Network Properties. You'll see a list of all your network adapters — one for Wi-Fi and one for Ethernet if you have both. Look for the line labeled Physical Address. That's your MAC address.

If you prefer the command line, open Command Prompt (search for "cmd" in the Start menu) and type ipconfig /all. Press Enter. You'll see a detailed list of all your network adapters. Look for the line that says Physical Address under the adapter you're using — usually "Ethernet adapter" or "Wireless LAN adapter".

Write down the address exactly as it appears. If you're entering it into your router's MAC filtering settings, copy and paste it rather than typing it by hand — one wrong character will prevent the device from connecting.

Finding Your Mac Address on macOS

Click the Apple menu in the top-left corner and select System Settings (or System Preferences on older versions). Go to General, then click About. Scroll down until you see Wi-Fi Address if you're on wireless, or Ethernet Address if you're using a wired connection. That's your MAC address.

You can also find it through Network settings. Open System Settings, go to Network, select your active connection (Wi-Fi or Ethernet), click Details, and look for MAC Address in the Hardware tab.

If you have both Wi-Fi and Ethernet connections, they will have different MAC addresses. Use the one that matches the connection type you're actually using on your network.

Finding Your Mac Address on Linux

Open a terminal window. Type ip link show and press Enter. You'll see a list of all network interfaces on your device. Look for the line that starts with "link/ether" — the address that follows is your MAC address. It will be in the format xx:xx:xx:xx:xx:xx where x is a letter or number.

If that command doesn't work on your system, try ifconfig instead. Type it and press Enter. Find your active network adapter (usually "eth0" for Ethernet or "wlan0" for Wi-Fi) and look for the line labeled HWaddr or ether. That's your MAC address.

Different Linux distributions may display the information slightly differently, but the MAC address will always be a six-pair string of hexadecimal characters separated by colons.

Finding Your Mac Address on Mobile Devices

On iPhone or iPad, open Settings, go to General, then About. Scroll down to find Wi-Fi Address. That's your MAC address for wireless connections. iPhones and iPads don't show a separate address for wired connections because they don't have Ethernet ports.

On Android, the location varies by manufacturer and Android version. Generally, open Settings, go to About Phone (or About Device), then look for Status or Hardware Information. You may see Wi-Fi MAC Address or MAC Address listed there. Some Android devices hide this in Developer Options — if you can't find it in the standard settings, search "MAC address" in the Settings search bar.

Why You Need Your Mac Address for Home Network Security

When you set up MAC filtering on your router, you're telling it to allow connections only from devices whose MAC addresses are on an approved list. This adds a layer of security because someone trying to connect to your network would need to know not just your Wi-Fi password but also the MAC address of an approved device.

You'll also need your MAC address if you're assigning a static IP address to a device through your router's DHCP settings. This ensures your printer, smart TV, or security camera always gets the same IP address, which makes it easier to find and configure.

Some internet service providers also use MAC addresses to identify your modem or router. If you replace your router, you may need to provide the new device's MAC address to your ISP so they can recognize it on the network.

What to Do If You Can't Find Your Mac Address

If the steps above don't show a MAC address, check that you're looking at the right network adapter. A device with both Wi-Fi and Ethernet will have two different MAC addresses — one for each connection type. Make sure you're viewing the adapter for the connection you actually use.

If your device is offline or the network adapter is disabled, the MAC address will still appear in settings — it doesn't require an active connection. If you see "Not Available" or a blank field, try restarting the device and checking again.

For printers, smart home devices, and other hardware that doesn't have a screen, check the device's physical label or sticker. Many manufacturers print the MAC address on the back or bottom of the device. You can also log into your router's admin page and look at the list of connected devices — your router usually displays the MAC address of every device that has ever connected to it.

Frequently Asked Questions

Can someone use my MAC address to hack my network?

A MAC address alone is not enough to connect to your network — someone would still need your Wi-Fi password. However, if your network uses MAC filtering, an attacker could potentially spoof (fake) a MAC address if they're within range of your router. MAC filtering adds security but should not be your only protection. Use a strong Wi-Fi password and keep your router's firmware updated.

Is my MAC address the same as my IP address?

No. Your MAC address identifies your device on your local network (your home Wi-Fi). Your IP address identifies your device on the internet. Your MAC address stays the same; your IP address can change when you move to a different network or when your router restarts.

Do I need to find the MAC address of my router?

Usually not. Your router has its own MAC address, but you typically only need the MAC addresses of the devices you want to connect to it — your laptop, phone, printer, and so on. If your ISP asks for a MAC address, they're asking for your router's address, which is printed on a sticker on the device itself.

What if my device shows multiple MAC addresses?

Devices with multiple network adapters (Wi-Fi and Ethernet, for example) will have a different MAC address for each one. Use the address that corresponds to the connection type you're actually using. Some devices also show a Bluetooth MAC address, which is separate and not used for your home network.

Can I change my MAC address?

Yes, but it's not necessary for home network security. Most people should leave their MAC address as it is. If you do want to change it, the process is different for each operating system and may require administrator access or terminal commands. Check your device's documentation if you have a specific reason to do so.