An access point is a device that broadcasts WiFi to your home, separate from the device that connects you to the internet
Your router does two jobs: it connects to your internet service provider through a cable or phone line, and it broadcasts WiFi so your devices can use that connection. An access point does only the second job — it receives internet from your router (through a cable or wirelessly) and rebroadcasts it as WiFi in a different part of your home.
This matters because a single router often cannot reach every room with strong signal, especially in larger homes or buildings with thick walls. An access point extends that coverage without requiring you to run a new internet line. It is not a separate internet account or a second connection to your provider — it is an extra WiFi broadcaster that uses the internet your router already has.
The confusion usually comes from the name. "Access point" sounds like a place you go to get online, but it is really just a repeater that makes your existing internet available in more places. Your router remains the device that actually connects to your ISP.
Key Takeaways
- An access point broadcasts WiFi but does not connect to your internet provider — your router does that, and the access point uses the internet your router provides.
- Access points are useful when one router cannot reach all the rooms in your home with strong signal, especially through walls or across multiple floors.
- An access point connects to your router either through an ethernet cable (most reliable) or wirelessly, and you set it up through a web browser or mobile app.
- Unlike a WiFi extender, a proper access point usually requires you to run a cable to it, but it delivers faster and more stable speeds in the rooms it covers.
How an access point connects to your router
An access point needs to receive internet from somewhere, and that somewhere is your router. The most reliable way is a physical ethernet cable run from your router to the access point — this gives the access point a dedicated, fast connection so it can rebroadcast at full strength. If running a cable is not practical, most access points can also connect wirelessly to your router, though this cuts the speed available to broadcast to your devices by roughly half.
Once the access point is connected and powered on, you log into it through a web browser or the manufacturer's app (usually by typing an IP address or scanning a QR code). You tell it which WiFi network to join — typically your router's own network — and give it a password. From that point forward, it broadcasts that same network name and password, so your devices see it as one continuous WiFi system rather than two separate networks.
Access points versus WiFi extenders
A WiFi extender is cheaper and requires no cable, but it works by receiving your WiFi signal and rebroadcasting it. This means it uses up half its bandwidth just to listen to your router, leaving only half available for your devices. An access point that is connected by ethernet cable does not have this limitation — it receives internet at full speed and can rebroadcast at full speed.
In practice, an extender is useful if you need to cover one dead zone and do not mind slower speeds there. An access point makes sense if you want reliable, fast WiFi in a whole section of your home — a second floor, a garage, or a back bedroom — and you are willing to run a cable to make it happen. If you cannot run a cable, a wireless access point is still better than an extender, but it will not perform as well as one connected by ethernet.
Where to place an access point for best coverage
The location of your access point matters as much as the device itself. Place it in a central location in the area you want to cover — not in a corner, not in a closet, and not on the floor. A shelf or wall mount in the middle of a room or hallway will reach more devices than one tucked away. If you are covering a second floor, place it on that floor rather than relying on it to broadcast upward from below.
Keep the access point away from metal objects, microwaves, and cordless phones, all of which interfere with WiFi signals. If you are running an ethernet cable to it, plan the route before you buy — you may need a cable that runs along baseboards or through walls, and the length matters. A 50-foot ethernet cable works fine, but anything longer than 100 feet starts to lose signal quality.
Setting up an access point on your network
Most access points follow the same basic setup. Power it on and wait for the lights to stabilize — usually 30 to 60 seconds. Open a web browser on a device connected to your router and type the IP address printed on the access point (often something like 192.168.1.1 or 192.168.0.1), or use the manufacturer's app if one is available. You will be asked to create a login password for the access point itself — this is separate from your WiFi password and is used only to change the access point's settings later.
Next, you choose which WiFi network the access point should join. Select your router's network name from the list, enter your WiFi password, and confirm. The access point will restart and connect. Once it is connected, it will broadcast the same network name and password, so your devices will see it as part of the same WiFi system. You can now move to the area you wanted to cover and check that the signal is strong.
If the access point is not connecting to your router, the most common cause is a wrong password. Double-check that you entered your WiFi password correctly — it is case-sensitive. If it still will not connect, restart both the access point and your router, wait two minutes, and try again.
When an access point is the right choice
An access point makes sense if your home is large enough that one router leaves dead zones, or if your router is in a location you cannot move (like where the internet line enters the house). It also makes sense if you have a garage, workshop, or guest house that needs WiFi but is too far from your main router. In these cases, the cost and effort of running a cable is worth the improvement in speed and reliability.
An access point is not the right choice if you only need to cover one small area temporarily, or if running a cable is truly impossible. In those cases, a WiFi extender is simpler, even if it is slower. An access point is also not necessary if your router already reaches every room with strong signal — adding one will not improve your network security or speed in areas that are already well covered.
Frequently Asked Questions
Do I need to buy an access point from the same manufacturer as my router?
No. Any access point will work with any router as long as both support the same WiFi standard (usually WiFi 5 or WiFi 6 in modern homes). Matching brands can make setup slightly simpler because the apps may integrate, but it is not required. The access point only needs to connect to your WiFi network like any other device would.
Can I use an old router as an access point?
Yes, most routers can be reconfigured to work as an access point. You disable the router's internet connection feature and set it to bridge mode or access point mode (the exact name varies by manufacturer). This is a good way to reuse an old router instead of buying a new access point, though older routers may not support the latest WiFi standards.
Will an access point slow down my internet speed?
If the access point is connected by ethernet cable, no — it will deliver the same speed as your router in the area it covers. If it is connected wirelessly, yes — it will be roughly half as fast as your router because it uses half its bandwidth to listen to your router and half to broadcast to your devices.
How many access points can I add to one router?
Most home routers can handle three to five access points without performance issues. Beyond that, the router becomes overloaded managing all the connections. If you need to cover a very large area, a mesh WiFi system (which is designed to work with multiple units) is usually a better choice than adding many separate access points.
Do I need to change my WiFi password after adding an access point?
No. The access point joins your existing network using your current password and rebroadcasts it. Your devices will not notice the change. If you want to change your WiFi password later, you change it on your router, and the access point will use the new password automatically.