Where to find your connected devices list
You can see every device connected to your WiFi by logging into your router's settings page. Most routers have a web address you type into a browser — usually something like 192.168.1.1 or 192.168.0.1 — or a mobile app made by the router manufacturer. Once you log in with your router's admin password, there is a section called "Connected Devices," "Device List," "DHCP Clients," or "Active Clients" that shows the name and IP address of everything currently using your network.
The exact location and wording depends on your router brand. If you have a mesh system like Eero, Netgear Orbi, or TP-Link Deco, the app is usually easier to navigate than the web page. If you have a traditional single router from companies like Linksys, ASUS, or D-Link, the web interface is typically more detailed.
Key Takeaways
- Log into your router at 192.168.1.1 or 192.168.0.1 using your admin password to see the full list of connected devices.
- Look for a section labeled "Connected Devices," "Device List," or "Active Clients" — the exact name varies by router brand.
- Each device shows a name (often the device type or hostname), an IP address, and sometimes the signal strength or connection type.
- Unknown devices on your network may indicate an unauthorized connection, so check regularly if security is a concern.
- Disconnecting a device from your router settings will force it off your WiFi without changing your password.
How to log into your router's settings page
Open a web browser on any computer or phone connected to your WiFi. Type 192.168.1.1 into the address bar and press Enter. If that does not work, try 192.168.0.1 or 10.0.0.1. Your router's manual or the sticker on the back of the device will list the correct address.
When the login page appears, enter your admin username and password. The default is often "admin" for both, but many routers ask you to set a custom password when you first set them up. If you have forgotten the password, you can reset the router to factory defaults by holding the reset button for 10 seconds — this erases all your settings, so only do this if you are willing to set up the network again from scratch.
Once logged in, look for a menu item on the left or top of the page. Common names include "Device Management," "Connected Devices," "DHCP," "LAN," or "Wireless." Click into that section and you will see the list.
What information the device list shows you
The connected devices list typically displays the device name (sometimes called hostname or SSID), the IP address assigned to it, the MAC address (a unique hardware identifier), and sometimes the connection type — WiFi or wired Ethernet. Some routers also show signal strength, the band the device is using (2.4 GHz or 5 GHz), and how long the device has been connected.
The device name is often something generic like "iPhone" or "Samsung Galaxy" unless you renamed it. The IP address is a four-part number like 192.168.1.50 that your router assigns temporarily. The MAC address is a string of letters and numbers like AA:BB:CC:DD:EE:FF that never changes and uniquely identifies that device's network card.
If you see a device you do not recognize, the MAC address is the most reliable way to track it down. You can search that MAC address online to find out what manufacturer made the device, which can help you figure out what it is.
Using your router's mobile app instead
Most modern routers come with a mobile app that shows connected devices more clearly than the web page. Netgear Nighthawk, ASUS, TP-Link, and Eero all have apps in the Apple App Store and Google Play Store. read the app, log in with the same username and password you use for the web page, and look for a "Devices" or "Connected Devices" tab.
The app usually shows device names with icons — a phone icon for iPhones, a laptop icon for computers — which makes it easier to recognize what is connected. Some apps let you rename devices, set bandwidth limits, or block a device from the network without logging into the web page at all.
Removing a device from your network
If you see a device you want to disconnect, you can remove it from the router settings without changing your WiFi password. In the connected devices list, find the device and look for a button or menu option that says "Remove," "Block," "Disconnect," or "Deny." Click it and the device will be forced off your network when ready.
The device will still have your WiFi password stored, so it may try to reconnect automatically. If you want to prevent it from reconnecting, you can "block" it instead of just disconnecting it — this tells the router to refuse that device's MAC address even if it tries to log in again. To let the device back on later, you unblock it the same way.
If you want to remove a device permanently and prevent it from ever reconnecting, you should change your WiFi password instead. Blocking a single device is useful for guests or family members you want to temporarily cut off, but changing the password is the only way to may support a device cannot reconnect if someone has the old password.
Checking for unknown or suspicious devices
Review your connected devices list regularly, especially if you are concerned about security. Look for device names you do not recognize. Neighbors' devices should not appear on your list unless they are connected to your network intentionally. If you see something unfamiliar, note the MAC address and search it online to find out what manufacturer made it.
Common devices that surprise people include smart home gadgets they forgot about — a smart plug, a security camera, or a printer — or devices belonging to family members. If you genuinely cannot identify a device and you are sure it should not be there, disconnect it and change your WiFi password to a strong one that is harder to guess.
Keep in mind that some devices connect and disconnect automatically. A laptop that is turned off will not appear on the list, but will reappear when you turn it on. Phones may drop off the list if they go to sleep or move out of range, then reconnect when they wake up or come back in range.
Frequently Asked Questions
Why does my device list show devices I do not recognize?
Smart home devices like printers, security cameras, thermostats, and smart speakers often have generic names like "Device-1234" or the manufacturer name. Search the MAC address online to identify it. If it is truly unknown, disconnect it and change your password.
Can I see what websites my devices are visiting?
The connected devices list shows only that a device is on your network and its IP address. To see what websites devices visit, you would need to enable logging or DNS filtering in your router settings, which is a separate feature not available on all routers.
What if I cannot log into my router?
Check the sticker on the back of your router for the default login address and password. If you changed the password and forgot it, you will need to reset the router to factory settings by holding the reset button for 10 seconds, then set it up again from scratch.
Does disconnecting a device from the router settings delete anything from that device?
No. Disconnecting or blocking a device only removes it from your network. The device itself is not affected — it still has all its files and settings. It just cannot use your WiFi until you unblock it or it reconnects with the correct password.
How often should I check my connected devices list?
If security is a concern, check it once a month or whenever you add a new device to your home. If you notice unusual activity or suspect someone has your WiFi password, check it when ready and change your password if you see anything unfamiliar.