What an IP address is and why you set one manually
An IP address is a number that identifies your device on your network — like a mailing address for data packets. Your router normally assigns one automatically when you connect, but sometimes you need to set one yourself: when a device needs a fixed address so other devices can always find it, when automatic assignment isn't working, or when you're troubleshooting a network problem.
Most people never need to do this. Your phone, laptop, and smart TV work fine with automatic addresses. But a printer, security camera, or network storage device often needs a manual address so it stays in the same place on your network. This guide covers the most common devices and operating systems.
Key Takeaways
- Most devices get an IP address automatically from your router, and you only need to set one manually if a device isn't connecting or needs a permanent address.
- On Windows, you change the IP address in Network Settings under "Change adapter options" or through the Settings app, depending on your Windows version.
- On Mac, you open System Settings, choose your network connection, and click "Details" to set a manual address.
- On phones and tablets, the manual IP option is usually in Wi-Fi settings under "Advanced" or "Static IP", though most people should leave this alone.
- Write down your router's address (usually 192.168.1.1 or 192.168.0.1) and the subnet mask before you start, so you don't accidentally isolate your device.
Finding your router's address and subnet mask first
Before you set a manual IP address, you need two pieces of information from your router: its own address and the subnet mask. These tell your device which other devices it can talk to on your network.
On Windows, open Command Prompt (right-click the Start menu and choose "Terminal" or "Command Prompt"). Type ipconfig and press Enter. Look for "Default Gateway" — that's your router's address, usually 192.168.1.1 or 192.168.0.1. Just above it, you'll see "Subnet Mask", usually 255.255.255.0. Write both down.
On Mac, open System Settings, click "Wi-Fi" or "Network", then click "Details". You'll see "Router" and "Subnet Mask" listed directly. On iPhone or Android, go to Settings, find Wi-Fi, tap the network you're connected to, and look for "Router" and "Subnet Mask" in the details — though not all phones show this clearly.
If you can't find these numbers, check the sticker on the back or bottom of your router. It usually lists the router's address and sometimes the subnet mask.
Setting a manual IP address on Windows
The steps differ slightly between Windows 11 and Windows 10, but both work the same way overall.
On Windows 11: Open Settings, go to "Network & internet", then "Wi-Fi" or "Ethernet" depending on how you're connected. Scroll down and click "Manage known networks" or "Advanced network settings". Find your network, click it, then click "Edit". Under "IP assignment", click "Edit", change the dropdown from "Automatic (DHCP)" to "Manual", turn on the toggle for IPv4, and enter your IP address (for example, 192.168.1.50), your subnet mask (usually 255.255.255.0), and your gateway (your router's address). Click "Save".
On Windows 10: Open Settings, go to "Network & Internet", then "Ethernet" or "Wi-Fi". Click your connection, scroll down to "IP settings", and click "Edit". Change "Automatic (DHCP)" to "Manual", turn on IPv4, and enter the same three pieces of information. Click "Save".
If you're using Ethernet instead of Wi-Fi, the path is the same but you'll choose "Ethernet" instead of "Wi-Fi" in the first step. After you save, your device will disconnect and reconnect with the new address. If it doesn't reconnect, restart your device.
Setting a manual IP address on Mac
Open System Settings and click "Wi-Fi" on the left side. Click "Details" next to the network you're connected to. Click the "TCP/IP" tab at the top.
In the "Configure IPv4" dropdown, change it from "Automatic (DHCP)" to "Manual". You'll now see three fields: "IPv4 Address", "Subnet Mask", and "Router". Enter your chosen IP address in the first field (for example, 192.168.1.50), your subnet mask in the second (usually 255.255.255.0), and your router's address in the third. Click "OK", then close the window.
Your Mac will disconnect and reconnect with the new address. If it doesn't, go back to Wi-Fi settings and toggle Wi-Fi off and back on.
Setting a manual IP address on iPhone or Android
On both phones and tablets, the process is similar but the exact menu names vary by manufacturer and Android version.
On iPhone: Open Settings, tap "Wi-Fi", find your network, tap the info icon next to it, and scroll down to "IPv4 Address". Tap "Configure IP" and change it from "Automatic" to "Manual". Enter your IP address, subnet mask, and router address in the fields that appear. Tap "Save" and go back to the Wi-Fi list — your phone will reconnect.
On Android: Open Settings, go to "Wi-Fi", long-press your network name, and tap "Modify". Scroll down and look for "Advanced options" or "IP settings". Change the dropdown from "DHCP" to "Static". Enter your IP address, gateway (router address), and subnet mask. Tap "Save" or "Connect". Some Android phones hide this option behind "Show advanced options" — if you don't see it, try that first.
Most phones and tablets don't need manual IP addresses. Only set one if your network administrator told you to, or if you're troubleshooting a specific problem.
Choosing an IP address that won't conflict with others
When you pick a manual IP address, you need to choose a number that your router won't also assign to another device. Most home routers assign addresses from 192.168.1.100 to 192.168.1.254 automatically, so pick something lower: 192.168.1.50 or 192.168.1.75 are safe choices on most networks.
If your router uses 192.168.0.x instead of 192.168.1.x (check the sticker on your router), use 192.168.0.50 or 192.168.0.75. The last number can be anything from 2 to 254, but avoid 1 (that's usually the router) and anything above what your router's manual says it assigns automatically.
If you're setting up multiple devices with manual addresses, space them out: 192.168.1.50, 192.168.1.51, 192.168.1.52, and so on. This prevents accidental conflicts if you ever set two devices to the same address by mistake.
What to do if your device won't connect after setting a manual IP
If your device connects to the network but can't reach the internet, or won't connect at all, the most common problem is a typo in the gateway (router) address. Go back and check that the router address matches exactly what you wrote down earlier.
The second most common problem is choosing an IP address that's already in use. Try a different number — jump to 192.168.1.100 or 192.168.1.200 instead. If that works, you know the first address was taken.
If the device still won't connect, switch back to automatic (DHCP) to confirm the device itself works. If it connects automatically but not with your manual address, the problem is in the numbers you entered. Go back to your router's sticker or the ipconfig/System Settings output and verify each number character by character.
Frequently Asked Questions
Do I need to set a manual IP address for my home network?
No, not for most devices. Phones, laptops, and tablets work fine with automatic addresses. You only need manual addresses for devices like printers or security cameras that other devices need to find reliably, or when troubleshooting a specific problem.
What happens if I set two devices to the same IP address?
Both devices will have trouble connecting or will drop off the network. Your router can't send data to two devices with the same address. If this happens, change one of them to a different number and restart both devices.
Can I use any IP address I want?
No. Your address must match your router's network — if your router uses 192.168.1.x, you must use 192.168.1.something. The last number can be 2 to 254, but avoid numbers your router assigns automatically (usually 100 to 254) to prevent conflicts.
Will setting a manual IP address make my network less find?
No. The security of your network depends on your Wi-Fi password and router settings, not whether devices have manual or automatic addresses. Setting a manual address doesn't change your security either way.
What if I forget what manual IP address I set?
Go back into the network settings on that device and check. On Windows, open ipconfig in Command Prompt and look for your device's name. On Mac, go to System Settings and click "Wi-Fi" then "Details". On phones, go back to the Wi-Fi settings and tap the network name.