When and why to reboot your router

A router reboot is the first thing to try when your internet drops, pages load slowly, or devices won't connect — even if everything looks fine on the device itself. Rebooting clears the router's memory, closes stuck connections, and forces it to reconnect to your internet service provider. Most connection problems that feel permanent actually clear within two minutes of a reboot.

You do not need to reboot often under normal conditions. If you find yourself rebooting more than once a month, the router may be overheating, failing, or positioned where it cannot reach all your devices. But for a sudden outage or a device that suddenly cannot connect while others can, a reboot is the fastest fix.

There are two types of reboot: a soft reboot (power off and on) and a factory reset (erasing all settings). This guide covers the soft reboot, which takes two minutes and solves most problems. A factory reset should only happen if you cannot connect to the internet at all and a soft reboot does not work.

Key Takeaways

  • A soft reboot means turning the router off for 30 seconds, then back on — this clears temporary problems without erasing your settings.
  • Unplug the power cable from the back of the router, not the wall outlet, so you know the router is fully off.
  • Wait the full 30 seconds even though the lights may come back on quickly — this gives the internal systems time to reset.
  • The router is ready to use when the lights stop blinking and settle into their normal pattern, usually two to three minutes after power returns.
  • If rebooting does not restore your connection, check that the cable from the wall outlet to the router is plugged in firmly at both ends.

The step-by-step soft reboot

Locate the power cable at the back of your router. This is a thick black or gray cable that plugs into the router and into a wall outlet or power strip. Do not unplug the internet cable (the thinner one that comes from the wall or modem) — only the power cable.

Unplug the power cable from the router itself, not from the wall. Unplugging at the router gives you a clear view of when it is disconnected. Wait 30 seconds. This is not arbitrary — the router's capacitors (small electrical components) need time to fully discharge. Counting to 30 or setting a timer on your phone ensures you wait long enough.

Plug the power cable back into the router. The lights on the front will begin to flash. This is normal. The router is restarting and reconnecting to your internet service provider. Do not unplug it again or interrupt this process.

Wait for the lights to stop blinking and return to their steady state. This usually takes two to three minutes. The exact pattern depends on your router model — some show a solid green light, others show multiple lights in different colors. Check your router's manual or the manufacturer's website if you are unsure what "normal" looks like for your model. Once the lights are steady, your internet should be back.

What the lights mean during a reboot

Most routers have a power light, an internet light, and lights for each connected device. During a reboot, these lights will behave differently than usual.

The power light will turn off when you unplug, then come back on when ready when you plug in — this is expected and does not mean the 30-second wait is over. The internet light will blink rapidly for 30 to 60 seconds as the router reconnects to your service provider. Once it stops blinking and becomes solid (usually green or white), your internet is back. Device lights may blink as the router rediscovers connected devices like phones, computers, and smart home equipment.

If the internet light never becomes solid after five minutes, the problem is not a temporary glitch. Unplug the modem (the separate box that connects to the wall outlet, if you have one) for 30 seconds, then plug it back in. Wait another two minutes. If the internet light is still blinking, contact your internet service provider — the problem is likely on their end.

Rebooting when your router has no power button

Most home routers do not have a power button. They are designed to stay plugged in and powered on all the time. This is why unplugging the cable is the only way to fully turn one off.

Some routers have a small recessed button labeled "Reset" or "Power" on the back. Do not press this unless you want to erase all your settings and return the router to factory defaults. A single press of the reset button will not reboot the router — it will erase your Wi-Fi password, security settings, and any customizations you have made. Only press the reset button if you cannot connect to the internet at all and a power-cable reboot does not work.

What to do if the internet still does not work

After the reboot is complete and the lights are steady, test your connection by opening a web browser on a phone or computer and visiting any website. If the page loads, your internet is working. If it does not, move to the next step.

Check the cable that runs from the wall outlet to your router. This is usually a gray or white cable labeled "Internet," "WAN," or "Modem." Unplug it from both the wall side and the router side, then plug it back in firmly. You should hear or feel a small click when it seats properly. Wait 30 seconds and test again.

If one device cannot connect but others can, the problem is with that device, not the router. Restart the device itself (phone, computer, or tablet) by powering it off for 10 seconds, then back on. Once it restarts, it should reconnect to the Wi-Fi automatically. If it does not, "forget" the Wi-Fi network on that device and reconnect by entering your Wi-Fi password again.

If all devices lose connection and rebooting the router does not restore it, contact your internet service provider. They can check whether the problem is on their end and walk you through further troubleshooting if needed.

How to reboot a router with a separate modem

Some internet setups have two boxes: a modem (which connects to the wall outlet) and a router (which connects to the modem). If you have both, reboot them in the correct order.

First, unplug the modem for 30 seconds, then plug it back in. Wait for its lights to become steady — this usually takes one to two minutes. Then unplug the router for 30 seconds and plug it back in. Wait for the router's lights to become steady. This order matters because the modem needs to reconnect to your service provider before the router can reconnect to the modem.

If you have a modem and router but are not sure which is which, the modem is the box that has a cable running to the wall outlet (not a power strip). The router is the box that has antennas or a flat design and sits near your devices.

Preventing frequent reboots

If you need to reboot your router more than once a month, something is wrong. The most common causes are overheating, a weak internet connection, or a router that is too old to handle your current devices.

Make sure your router has airflow around it. Do not place it inside a cabinet, under a blanket, or against a wall. Leave at least four inches of space on all sides. If your router feels hot to the touch, move it to a cooler location or add a small fan nearby.

If you have many devices connected at once (phones, tablets, computers, smart home devices, security cameras), your router may be overwhelmed. Older routers designed for five or six devices struggle when handling 20 or more. If this is your situation, upgrading to a newer router will reduce crashes and improve speed.

If your internet connection itself is unstable — dropping even when the router is cool and not overloaded — contact your service provider. They can test the line from the street to your home and check whether the modem is working correctly.

Frequently Asked Questions

Will rebooting my router erase my Wi-Fi password?

No. A soft reboot (unplugging the power cable) keeps all your settings, including your Wi-Fi name and password. Your devices will reconnect automatically once the router is back on. A factory reset would erase these settings, but that requires pressing and holding the reset button for 10 to 15 seconds — a straightforward unplug will not do it.

How long should I wait before plugging the router back in?

Wait a full 30 seconds. The router's internal capacitors need time to discharge completely. If you plug it back in after five or ten seconds, some of the stuck connections may remain. Thirty seconds is the standard across most router manufacturers and gives a reliable reboot.

Can I reboot my router while someone is using the internet?

You can, but they will lose their connection for two to three minutes while the router restarts. If someone is in the middle of a video call, online game, or important upload, let them finish first. For a quick reboot, it is usually better to do it when no one is actively using the internet.

What if my router does not have lights?

Some newer routers have no visible lights or very dim ones. If you cannot see lights, unplug the router for 30 seconds anyway. Wait another two to three minutes after plugging it back in before testing your connection. The reboot is happening even if you cannot see it.

Is it safe to reboot my router frequently?

Yes, rebooting is safe and does not damage the router. However, if you find yourself rebooting more than once a month, the router itself may be failing or your internet connection may be unstable. Frequent reboots are a sign to contact your service provider or consider replacing the router.