Why you might need to change your IP address
Your device gets an IP address automatically when it connects to your network — think of it as a mailing address that lets other devices find and talk to yours. Most of the time you never touch it. But sometimes you need to change it: a device keeps getting the wrong address, you want to assign a fixed address to a printer so it stays in the same place, or you're troubleshooting a conflict where two devices ended up with the same number.
The process is different depending on whether you want your device to pick a new address from your router each time it connects (called DHCP), or whether you want to lock in a specific address that never changes (called a static IP). Both are straightforward once you know where to look.
Key Takeaways
- Most devices use DHCP, which means your router assigns an address automatically — you can force a new one by disconnecting and reconnecting to the network.
- A static IP address stays the same every time the device connects, which is useful for printers, security cameras, or devices you access by address.
- You can set a static address either on the device itself or by reserving an address in your router's settings.
- Changing your IP address on your own device does not affect your internet security or hide your activity from your internet provider.
Renewing your IP address on Windows
The fastest way to get a new IP address on Windows is to ask your router for one. Open the Command Prompt by pressing the Windows key, typing cmd, and pressing Enter. Type this command exactly: ipconfig /release and press Enter. Wait a few seconds, then type ipconfig /renew and press Enter again.
Your device will release its current address and request a new one from your router. You can verify the change worked by typing ipconfig and pressing Enter — look for the line that says "IPv4 Address" and note the number. If you run the command again a few seconds later, the address should be the same (your router remembered it). If you want a different one, repeat the release and renew steps.
If you prefer not to use the command line, you can also disconnect from the network and reconnect: click the network icon in the bottom right corner, select your Wi-Fi network, click Disconnect, wait 10 seconds, then select the network again and enter your password. Your router will assign a fresh address.
Renewing your IP address on Mac
On a Mac, open System Settings and click Network in the left sidebar. Select your active connection (usually Wi-Fi), then click Advanced. Go to the TCP/IP tab and look for the Renew DHCP Lease button — click it. Your Mac will release its current address and request a new one from your router.
If you do not see that button, your connection may already be set to manual. In that case, click the dropdown that says "Configure IPv4" and change it from Manual to Automatic (DHCP), then click OK. Your Mac will now request an address from the router each time it connects.
Setting a static IP address on your device
A static IP address is one that stays the same every time your device connects. This is useful for devices you want to reach by address — like a printer on your network, a security camera, or a computer you access remotely. The steps differ by device, but the idea is the same: you tell the device to use a specific address instead of asking the router for one.
On Windows: Open Settings, go to Network & Internet, then Status. Click "Change adapter options," right-click your connection, and select Properties. Double-click "Internet Protocol Version 4 (TCP/IPv4)." Select "Use the following IP address" and enter a static address in the same range as your router — for example, if your router uses 192.168.1.1, use something like 192.168.1.50. Leave the subnet mask as 255.255.255.0 unless you know your network uses something different. Enter your router's address (usually 192.168.1.1) as the default gateway. Click OK and close the windows.
On Mac: Open System Settings, click Network, select your connection, then click Advanced. Go to the TCP/IP tab. Click the dropdown that says "Configure IPv4" and select "Manual." Enter a static address in the same range as your router, set the subnet mask to 255.255.255.0, and enter your router's address as the default gateway. Click OK.
On iPhone or iPad: Open Settings, tap Wi-Fi, find your network, tap the info icon next to it, then tap Configure IP. Select "Manual" and enter a static address, subnet mask, and router address using the same ranges as above. Tap Save.
On Android: Open Settings, go to Wi-Fi, long-press your network, tap Edit, then tap Advanced Options. Change the IP settings dropdown from DHCP to Static. Enter a static address, gateway, and subnet mask. Tap Save.
Reserving an IP address in your router
Instead of setting a static address on the device itself, you can tell your router to always give a specific device the same address. This is called a DHCP reservation, and it is often easier because you manage everything in one place — the router — rather than hunting through settings on each device.
Log into your router's admin panel by opening a browser and typing your router's address (usually 192.168.1.1 or 192.168.0.1 — check the sticker on the back of the router). Enter your admin username and password. Look for a section called DHCP, DHCP Reservation, Reserved Addresses, or Address Reservation — the exact name varies by router brand.
Find the device you want to reserve an address for (the router will show you a list of connected devices and their current addresses), select it, and tell the router to reserve that address. From now on, whenever that device connects, it will get the same address. This approach is better than setting a static address on the device because if you ever move the device to a different network, it will not try to use an address that does not belong there.
Troubleshooting address conflicts
If two devices end up with the same IP address, they cannot both use the network properly — one or both will lose connection. This usually happens when you set a static address on a device and your router also assigns that same address to something else.
The fix is to pick a static address outside the range your router normally assigns. Most routers assign addresses starting from 192.168.1.100 and going up. If you need a static address, use something lower like 192.168.1.50 or 192.168.1.75. Or use your router's reservation feature instead — it will never create a conflict because the router knows about it.
If you are not sure what range your router uses, log into the admin panel, find the DHCP settings, and look for the "DHCP pool" or "address range" — it will show you the lowest and highest addresses the router assigns. Pick a static address below the lowest number in that range.
What changing your IP address does and does not do
Changing your device's IP address on your home network is purely a local change — it only affects how other devices on your network find yours. It does not hide your activity from your internet provider, does not change your public IP address (the one the outside internet sees), and does not improve security by itself.
Your internet provider sees all your traffic regardless of what local address your device uses. If you want to hide your activity from your provider or from websites you visit, you would need a VPN — a different tool entirely. Changing your local IP address is useful for network management and troubleshooting, not for privacy.
Frequently Asked Questions
Will changing my IP address disconnect me from the internet?
No. Renewing your address or setting a static one keeps you connected — your device straightforward gets a new local address while staying on the network. You might see a brief pause while the change happens, but you should not lose internet access.
What IP address should I use if I am setting a static one?
Use an address in the same range as your router but outside the range it normally assigns. If your router is 192.168.1.1, try 192.168.1.50 or 192.168.1.75. Check your router's DHCP settings to see what range it uses, and pick a number below that range.
Can I change my IP address to hide from my internet provider?
No. Your local IP address is only used on your home network. Your internet provider sees your public IP address, which is assigned by them and does not change when you modify your device's local address. Changing your local IP address does not affect what your provider can see.
Should I use a static address or a reservation?
A reservation in your router is usually better because the router manages it and prevents conflicts. Set a static address on the device itself only if you need the address to stay the same even if the device moves to a different network.
How do I find my router's admin address if I do not know it?
Check the sticker on the back or bottom of your router — it usually lists the address (often 192.168.1.1 or 192.168.0.1) and the default username and password. If the sticker is gone, try typing 192.168.1.1 into a browser and see if it loads your router's login page.