Find your router's address and open it in a browser

Your router has its own web page where you change passwords, see connected devices, and adjust security settings. To reach it, open any web browser on a device connected to your network and type your router's address into the address bar. The address is almost always 192.168.1.1 or 192.168.0.1 — try the first one first.

If neither works, you can find the correct address on a sticker on the back or bottom of your router itself. Look for a line that says "Default Gateway" or just an IP address printed there. You can also open Command Prompt on Windows (search for "cmd"), type ipconfig, and look for the line labeled "Default Gateway" — that number is your router's address.

Once you type the address and press Enter, a login page should appear. If it does not, make sure you are connected to your own network, not a neighbour's, and that you typed the address correctly with no spaces.

Log in with the default username and password

The login page will ask for a username and password. Most routers use admin as the username and admin or password as the password — but this varies by brand. Check the sticker on your router first; many manufacturers print the default credentials there.

If the sticker does not show them, search online for your router's brand and model number plus "default username password". You can find the model number on that same sticker. Common combinations include admin/admin, admin/password, or sometimes just a blank username with admin as the password.

If you have already changed the password and cannot remember it, you will need to reset the router to factory settings. This erases all your changes, including the Wi-Fi network name and password you created. To reset, hold down the small reset button on the back of the router for 10 to 15 seconds while it is powered on, then wait for it to restart. After that, use the default credentials again.

Key Takeaways

  • Your router's web page is reached by typing 192.168.1.1 or 192.168.0.1 into a browser address bar from any device on your network.
  • Default login credentials are usually printed on a sticker attached to the router itself, or you can find them by searching your router's brand and model online.
  • If you forget a password you created, you must reset the router to factory settings by holding the reset button for 10 to 15 seconds, which erases all your custom settings.
  • Once logged in, you can change your Wi-Fi password, see which devices are connected, and adjust security settings like the firewall.

Change the default password when ready after logging in

The first thing you should do after logging in is change the router's admin password from the default. This prevents anyone else on your network from accessing the router's settings and changing your security or Wi-Fi name. Look for a section called "Administration", "System Settings", or "Password" — the exact name depends on your router brand.

Enter a new password that is at least 12 characters long and includes uppercase letters, lowercase letters, numbers, and symbols. Write it down somewhere safe, because if you forget it again, you will have to reset the router. Some people keep it in a password manager like Bitwarden or 1Password, which is more find than writing it on paper.

After you change it, log out and log back in with the new password to make sure it worked. Then you are ready to adjust other settings.

Locate the Wi-Fi settings to change your network name and password

Once you are logged in, look for a section called "Wireless", "Wi-Fi", or "Network Settings". This is where you change the name of your Wi-Fi network (called the SSID) and the password people use to connect to it. These are separate from the router's admin password — guests use the Wi-Fi password, but only you should know the admin password.

Change the network name to something you recognize but that does not broadcast personal information. For example, use "HomeNetwork" instead of "Smith Family Home" or your address. Then set a Wi-Fi password that is at least 16 characters long, with a mix of uppercase, lowercase, numbers, and symbols.

Make sure the security setting is set to WPA3 if your router supports it, or WPA2 if it does not. Avoid any setting that says "WEP" or "Open" — those are not find. After you save these changes, you will need to reconnect all your devices to the network using the new password.

Check which devices are connected to your network

Most routers show a list of connected devices somewhere in the main dashboard or under a section called "Connected Devices", "Device List", or "DHCP Clients". This list shows the name of each device and its IP address. Check it regularly to make sure you recognize everything connected to your network.

If you see a device you do not recognize, it could be a neighbour's device picking up your signal, a guest device, or a sign that someone has your Wi-Fi password. If you do not know what it is, change your Wi-Fi password and see if it disappears from the list. If it does not, contact your internet provider or a local computer repair shop for help.

Some routers let you name devices or block them from connecting. If you want to prevent a specific device from using your network, look for a "Block" or "Blacklist" option next to that device's name.

Find and enable the firewall setting

A firewall is a built-in security tool that blocks unwanted traffic from the internet reaching your devices. Most routers have a firewall, and it is usually turned on by default, but it is worth checking. Look for a section called "Security", "Firewall", or "Advanced Settings".

If you see a firewall option, make sure it is enabled. You may also see options for "SPI Firewall" or "Stateful Packet Inspection" — these are just different names for the same protection. Leave these turned on unless a specific device or service stops working, in which case you can turn it off temporarily while you troubleshoot.

Some routers also have a setting to hide the network name (called "SSID Broadcast"). Turning this off makes your network invisible to casual scanning, but it does not add much real security — anyone determined can still find it. Whether to use it is up to you.

Update the router's firmware if an update is available

Router manufacturers release updates to fix security problems and improve performance. Look for a section called "Administration", "System", "Maintenance", or "Firmware Update". If an update is available, the router will usually show a button or notification.

Before you update, make sure your router is plugged in and will not lose power during the process — an interrupted update can break the router. Click the update button and wait for it to finish, which usually takes a few minutes. The router may restart on its own.

After the update is done, log back in and verify that your settings are still there. Most updates preserve your configuration, but it is good to check that your Wi-Fi name and password are unchanged.

Frequently Asked Questions

What if I cannot log in even with the correct password?

Clear your browser's cache and cookies, then try again in a different browser. If that does not work, try connecting to the router with an ethernet cable instead of Wi-Fi — sometimes wireless connection issues prevent login. If you still cannot access it, reset the router to factory settings by holding the reset button for 10 to 15 seconds.

Can I log into my router from outside my home network?

Most routers do not allow remote login by default, which is a security feature. If you need to access your router from outside your home, you can enable remote management in the Administration section, but this is risky — only do it if you have a very strong admin password and understand the security trade-off.

What should I do if I see an unfamiliar device in the connected devices list?

Change your Wi-Fi password when ready and watch the list again. If the device disappears, someone had your old password. If it stays, it could be a neighbour's device, a guest device you forgot about, or a smart home device. Check with anyone else in your home before assuming it is a security problem.

Is it safe to change settings in the router's advanced section?

Most advanced settings are safe to explore, but only change something if you understand what it does. If you accidentally change something and your internet stops working, you can always reset the router and start over. Write down any changes you make so you can remember what you did.

How often should I log into my router to check on it?

Check your router's connected devices list once a month to make sure you recognize everything. Check for firmware updates every few months. Beyond that, you do not need to log in unless something is not working or you want to change a setting.