What you need before you start

A router installation takes about 15 minutes if you have the right equipment in front of you. You need the router itself, an ethernet cable (usually included), power adapter, and access to your modem. The modem is the device your internet service provider gave you — it connects to the wall jack and to your router. If you do not have an ethernet cable, a standard Cat5e or Cat6 cable works fine and costs $5 to $15 at any hardware store.

Before you unpack anything, turn off your modem by unplugging it. Wait 30 seconds, then plug it back in and let it fully restart — you will see lights stop blinking and stabilize. This clears any connection issues between your modem and your service provider's network. While the modem restarts, unpack your router and locate the power adapter, ethernet cable, and any documentation that came in the box.

Key Takeaways

  • Connect an ethernet cable from your modem's ethernet port to the port on your router labeled WAN, Internet, or with a different color than the other ports.
  • Plug in the router's power adapter and wait two to three minutes for all lights to stop blinking and stabilize before you try to connect.
  • Find your router's default network name (SSID) and password on a sticker on the back or bottom of the device, or in the setup documentation.
  • On your phone or computer, search for available networks, select your router's network name, and enter the password to connect.
  • After connecting wirelessly, open a web browser and go to your router's setup page (usually 192.168.1.1 or 192.168.0.1) to change the default password and network name.

Connecting the ethernet cable between modem and router

Look at the back of your modem. You will see at least one port labeled "Ethernet" or "LAN" — it looks like a phone jack but slightly wider. Take one end of your ethernet cable and push it firmly into that port until you hear a click. The cable should not come out if you tug it gently.

Now look at the back of your router. You will see multiple ethernet ports. One is labeled differently — it might say "WAN," "Internet," "Uplink," or be a different color (often blue or yellow) than the others. This is the port that connects to your modem. Plug the other end of your ethernet cable into that port with the same firm push until it clicks. Do not plug the cable into one of the regular ethernet ports — those are for devices you want to connect with a wire, not for the modem.

Powering on the router and waiting for startup

Plug the router's power adapter into a wall outlet. You will see lights on the front of the router start to blink. Different routers use different light patterns, but the general rule is: wait until the lights stop changing. This usually takes two to three minutes. You might see a light labeled "Internet," "WAN," or "Status" — when it stops blinking and stays solid or glows steadily, the router has connected to your modem.

If the lights never stabilize or the Internet light stays off after five minutes, unplug the router, wait 30 seconds, and plug it back in. If it still does not work, unplug the modem as well, wait 30 seconds, plug in the modem, wait for it to fully restart, then plug in the router. Most connection problems at this stage are solved by restarting both devices in order.

Finding your network name and default password

Look at the back or bottom of your router. There is usually a sticker with information printed on it. Find the line that says "SSID," "Network Name," or "Wi-Fi Name" — this is the name your phone or computer will see when searching for networks. Next to it or nearby is a line that says "Password," "Key," or "Passphrase" — this is what you will type to connect. Write both down or take a photo of the sticker.

If you cannot find a sticker or the text is worn away, check the documentation that came in the box or look on the inside of the battery cover if the router uses batteries. As a last resort, the router's model number is usually printed on the back — you can search "[model number] default password" online to find the factory settings. Do not skip this step; you need the correct password to connect wirelessly.

Connecting your first device wirelessly

On your phone or computer, open the Wi-Fi settings. You will see a list of available networks. Look for the network name (SSID) you found on the router sticker. Tap or click on it. A box will appear asking for a password. Type the password exactly as it appears on the sticker — passwords are case-sensitive, so uppercase and lowercase letters matter. If the password has numbers and symbols, enter them exactly.

Once you enter the password, your device will connect. You should see a checkmark or "Connected" next to the network name. Open a web browser and try to load any website — if a page appears, your internet is working. If you see an error or a login page, wait another minute for the router to fully establish the connection, then try again.

Changing the default password and network name

The default password on your router is the same for every router of that model, which means anyone who knows the model could connect to your network. You should change it. While connected to your router wirelessly, open a web browser and type the router's setup address into the address bar. This is usually 192.168.1.1 or 192.168.0.1 — check your router's documentation if neither works. A login page will appear.

Enter the default username and password from the sticker on your router. Most routers use "admin" as the username and the same password that is on the sticker, but check your documentation to be sure. Once you log in, look for a section called "Wireless," "Wi-Fi," "Network," or "Settings." Find the fields for "SSID" (network name) and "Password" or "Passphrase." Change the password to something you will remember but that is not your birthday, address, or pet's name. A mix of uppercase, lowercase, numbers, and a symbol is stronger. Change the network name to something that identifies your home — "Smith Household" or "Apartment 3B" works fine.

After you change both, look for a "Save," "explore," or "OK" button. The router will restart, which takes about a minute. Your devices will lose connection briefly. When the lights stabilize again, reconnect using your new network name and password. Write down both in a safe place — you will need the password if you add new devices later.

Troubleshooting a router that will not connect

If your router's lights do not stabilize after five minutes, or if devices cannot find your network, start with the restart sequence: unplug the modem, wait 30 seconds, plug it in, wait for it to fully restart, then unplug the router, wait 30 seconds, and plug it in. This solves most problems.

If the modem and router are far apart or separated by walls, move them closer together temporarily to test. Routers have a limited range, and thick walls or distance can prevent connection. If moving them closer fixes the problem, you may need to relocate the router to a more central location in your home.

If you still cannot connect after restarting both devices and moving them closer, check that the ethernet cable is firmly seated in both the modem and the router's WAN port. A loose cable is the most common cause of "no internet" after installation. If the cable is loose, unplug it, wait five seconds, and plug it back in firmly until you hear a click.

Positioning your router for the best signal

After your network is working, think about where the router will live long-term. A central location in your home — ideally elevated on a shelf rather than on the floor — gives the strongest signal throughout. Avoid placing it inside a cabinet, closet, or behind a TV, as these block the signal. Metal objects, microwaves, and cordless phones can interfere with Wi-Fi, so keep the router away from those if possible.

If you have a two-story home, placing the router on the upper floor usually covers both levels better than placing it on the lower floor. If one room consistently has weak signal, you may eventually want a second router or a mesh system, but start with the router you have in the best location first — you might not need more.

Frequently Asked Questions

Do I have to use the ethernet cable, or can I connect the router wirelessly to the modem?

No, routers do not connect wirelessly to modems. The ethernet cable is required. The modem and router must be physically connected by cable so the router can receive internet from the modem and share it wirelessly to your devices.

What if my router has no WAN port and all the ethernet ports look the same?

Some routers label the WAN port differently or use a different color. Check the documentation that came with your router or search the model number online. If you plug the cable into the wrong port, the router will not connect to the internet — you can straightforward move the cable to the correct port and restart both devices.

Can I use a different password than the one on the sticker?

Yes, and you should. The default password is the same for every router of that model. Change it to something unique in your router's settings page (usually 192.168.1.1) so only people you tell can connect to your network.

Why does my router keep disconnecting from the internet?

Check that the ethernet cable between the modem and router is fully seated and has not come loose. Restart both devices by unplugging them, waiting 30 seconds, and plugging them back in. If disconnections continue, the cable itself may be damaged — try a different ethernet cable.

How do I know if my router is working correctly?

Your router is working if devices can connect wirelessly, load websites, and stream video without constant buffering. The lights on the front should be stable (not constantly blinking) once startup is complete. If you can browse the internet on multiple devices, your router is doing its job.