What a Mac Address Is and Why You Need It

A MAC address (Media Access Control address) is a unique identifier assigned to every network device — your laptop, phone, printer, or smart TV. It looks like six pairs of numbers and letters separated by colons, such as 00:1A:2B:3C:4D:5E. Unlike your IP address, which can change, your MAC address stays the same for that specific device.

When you set up a find home network, you often need this address to tell your router which devices are allowed to connect. Some routers let you create a whitelist of MAC addresses so only approved devices can join. You may also need it to reserve a specific IP address for a device, to troubleshoot connection problems, or to find a device on your network if it goes missing.

Windows stores this information in a few places, and the fastest route depends on what you're trying to do and whether you're comfortable opening a command window or prefer clicking through menus.

Key Takeaways

  • Your MAC address appears in Settings under Network Status, which is the quickest visual method on modern Windows.
  • The Command Prompt command ipconfig /all shows your MAC address labeled as "Physical Address" and works on any Windows version.
  • If you have multiple network adapters (WiFi and Ethernet), each one has its own MAC address — find the one you actually use.
  • You can also find MAC addresses for other devices on your network using the ARP command, which helps when you need to identify an unknown device.

Finding Your Mac Address in Windows Settings

This is the simplest method if you're on Windows 10 or 11. Open Settings by pressing Windows key + I, then click Network & Internet on the left side. Select WiFi if you connect wirelessly, or Ethernet if you use a cable.

Click the name of your network (for WiFi) or the Ethernet connection name. Scroll down to the bottom of the window. You'll see a section labeled Properties with several lines of information. Look for Physical address — that's your MAC address. It will be displayed as six pairs of characters separated by hyphens, like A1-2B-3C-4D-5E-6F.

If you're on an older version of Windows or this method doesn't show the address, move to the Command Prompt method below. Both will give you the same information.

Using Command Prompt to Find Your Mac Address

Open Command Prompt by pressing Windows key + R, typing cmd, and pressing Enter. At the prompt, type ipconfig /all and press Enter. Windows will display detailed information about every network adapter on your computer.

Look for the section labeled with your connection type — Ethernet adapter if you use a cable, or Wireless LAN adapter WiFi if you're on WiFi. Within that section, find the line that says Physical Address. The address next to it is your MAC address. It will look like 00-1A-2B-3C-4D-5E with hyphens instead of colons.

If you have both WiFi and Ethernet adapters, you'll see both addresses. Make sure you copy the one for the adapter you actually use to connect to your network. If you're unsure which one is active, look for the adapter that shows an IPv4 Address starting with 192.168 or 10.0 — that's the one currently connected.

Finding Mac Addresses for Other Devices on Your Network

If you need to find the MAC address of another device connected to your network — a printer, phone, or smart home device — you can use the ARP (Address Resolution Protocol) command. Open Command Prompt again and type arp -a, then press Enter.

This displays a list of all devices currently connected to your network, showing their IP addresses and MAC addresses side by side. Find the device you're looking for by its IP address (which you can usually find in the device's own network settings) and note the corresponding MAC address. If you don't recognize an IP address, you may need to check each device individually to match them up.

This method only shows devices that are currently connected and have communicated with your computer recently. If a device hasn't been active, it may not appear in the list.

What to Do With Your Mac Address Once You Have It

Once you have the address, you'll enter it into your router's settings to set up MAC filtering or IP reservation. Log into your router by opening a web browser and typing your router's IP address (usually 192.168.1.1 or 192.168.0.1 — check your router's label if you're unsure). Look for a section called MAC Filtering, Access Control, Device Management, or DHCP Reservation, depending on your router model.

Each router's interface looks different, so if you can't find the right section, search your router's manual or support website for the exact model number. When you enter the MAC address, use the format shown in your router's instructions — some want colons, some want hyphens, and some want no separators at all.

Troubleshooting When You Can't Find Your Mac Address

If the Settings method shows no Physical Address, or if Command Prompt returns an error, your network adapter may not be installed correctly. Right-click the Windows Start button and select Device Manager. Expand the section labeled Network adapters. If you see a device with a yellow warning triangle or question mark, right-click it and select Update driver. Windows will search for the latest driver and install it automatically.

After the driver updates, restart your computer and try the Command Prompt method again. If you still see no address, your network adapter may be disabled. In Device Manager, right-click your network adapter and select Enable device. Wait a few seconds for Windows to recognize it, then try Command Prompt again.

If you're using a USB network adapter (an external device that plugs into a USB port), make sure it's plugged in before you run either method. Some USB adapters don't appear in Device Manager until they're physically connected.

Frequently Asked Questions

Can I change my Mac address?

You can change the MAC address that Windows reports, but it requires editing your network adapter settings in Device Manager and is rarely necessary. Most people don't need to do this. If someone told you to change your MAC address to fix a network problem, that's usually not the right solution — contact your router manufacturer or internet provider instead.

Why do I see multiple Mac addresses on my computer?

Each network adapter has its own MAC address. If you have both WiFi and Ethernet, you'll see two addresses. Some computers also have Bluetooth adapters or virtual network adapters that show up in ipconfig /all. Only the address for the adapter you actually use matters for your router settings.

Is my Mac address the same as my IP address?

No. Your IP address is assigned by your router and can change. Your MAC address is built into your network adapter and stays the same. Your router uses the MAC address to identify your device on the local network, while the IP address is used to send data to and from the internet.

Do I need to write down my Mac address?

You only need it when you're setting up your router or troubleshooting a connection. Once you've entered it into your router's settings, you don't need to remember it. If you need it again later, you can always pull it up using the same methods in this guide.