Your router has its own address on your network, and you need it to change security settings
Your router — the device that broadcasts your Wi-Fi — has an IP address, just like your phone or laptop. This address is how you reach the router's settings page, where you can change your Wi-Fi password, turn on encryption, or see which devices are connected. Without the router's IP address, you cannot access those controls.
The address is usually printed on a sticker on the back or bottom of the router itself. If you cannot find the sticker, your operating system can show you the address in about 30 seconds. The most common addresses are 192.168.1.1 or 192.168.0.1, but the exact number depends on your router's manufacturer.
Key Takeaways
- Your router's IP address is printed on a physical sticker attached to the device — check the back or bottom first.
- On Windows, you can find the address by opening Command Prompt and typing ipconfig, then looking for "Default Gateway".
- On Mac or Linux, open Terminal and type route -n get default or ip route to see the gateway address.
- Once you have the address, type it into your web browser's address bar to reach your router's login page.
- The router's default username and password are usually "admin" and "admin" or "admin" and "password" — change these when ready after logging in.
Check the physical sticker on your router first
Most routers have a label on the back or bottom that lists the default IP address, the default username, and the default password. Look for text that says "IP Address", "Gateway", or "Router Address" — the number next to it will look like 192.168.1.1 or 10.0.0.1.
If the sticker is faded or missing, or if you have already changed the address and do not remember it, move to the next section. The sticker only shows the factory default, not any custom address you may have set later.
Find the address on Windows using Command Prompt
Open the Start menu and type cmd or Command Prompt. Click to open it. At the prompt, type ipconfig and press Enter. A list of network information will appear.
Look for the section labeled with your active network connection — usually "Ethernet adapter" if you are plugged in, or "Wireless LAN adapter" if you are on Wi-Fi. In that section, find the line that says "Default Gateway". The number next to it is your router's IP address. Write it down or copy it.
Find the address on Mac using Terminal
Open Spotlight by pressing Command + Space, type Terminal, and press Enter. At the prompt, type route -n get default and press Enter. Look for the line that says "gateway:" — the number next to it is your router's IP address.
If that command does not work, try netstat -nr | grep default instead. The first number in the output is your router's address. Copy it and close Terminal.
Find the address on Linux using Terminal
Open a terminal window. Type ip route and press Enter. The output will show one or more routes. Look for the line that begins with "default via" — the IP address when ready after "via" is your router's address.
If that does not work, try route -n instead. Look for the line with "0.0.0.0" in the Destination column — the number in the Gateway column is your router's address.
Log in to your router using the address you found
Open a web browser — Chrome, Firefox, Safari, or Edge all work. In the address bar at the top, type the IP address you found (for example, 192.168.1.1) and press Enter. A login page should appear.
The default username is usually admin. The default password is usually admin, password, or 12345 — check the sticker on your router or the manual that came with it. If none of those work, look up your specific router model online with the words "default password".
Once you are logged in, you can change the Wi-Fi password, turn on WPA3 or WPA2 encryption, see which devices are connected, and adjust other security settings. Change the default username and password to something only you know before you do anything else.
What to do if you cannot reach the login page
If you type the IP address and nothing happens, or you see an error message, the address may be wrong. Go back and run the command again — ipconfig on Windows, route -n get default on Mac, or ip route on Linux — and double-check the number you copied.
If the address looks correct but the page still will not load, try a different web browser. Some older routers do not work well with newer versions of Chrome or Firefox. If you are still stuck, restart your router by unplugging it for 10 seconds, plugging it back in, and waiting two minutes for it to boot up. Then try the address again.
If you have changed the router's IP address in the past and do not remember what you changed it to, you can reset the router to factory defaults by holding down the reset button (usually a small hole on the back) for 10 to 15 seconds while the router is powered on. This will erase all your custom settings and return the address to the default printed on the sticker. You will need to set up your Wi-Fi password and other settings again from scratch.
Frequently Asked Questions
What if I forgot the router's login password?
You can reset the router to factory settings by holding the reset button for 10 to 15 seconds. This erases all custom settings and returns the password to the default on the sticker. You will need to set up your Wi-Fi and other settings again, but you will regain access to the router's controls.
Is it safe to use the default username and password?
No. Anyone on your network or within range of your Wi-Fi can look up the default password for your router model online and log in to change your settings or see your connected devices. Change the username and password to something unique as soon as you log in for the first time.
Can I access my router from outside my home network?
Not through the IP address — that address only works on your home network. Some routers have a remote management feature that lets you log in from elsewhere, but this is a security risk and should be turned off unless you have a specific reason to use it. Check your router's settings to make sure remote management is disabled.
What if my router does not have a default IP address on the sticker?
Try 192.168.1.1 or 192.168.0.1 — these are the most common defaults across manufacturers. If neither works, search online for your router's brand and model number plus "default IP address". The manufacturer's support page will have the correct address.
Do I need to know the IP address to change my Wi-Fi password?
Yes. The IP address is the only way to reach your router's settings page. Some routers have a mobile app that can change the password without typing the IP address, but the app still connects to the router using that same address behind the scenes.