What you need to know right now

Your router has its own IP address — usually something like 192.168.1.1 or 192.168.0.1 — and you need it to log in and change your network settings. The fastest way to find it is to look at a sticker on the back or bottom of the router itself. If that sticker is gone or unreadable, you can find the address through your computer or phone in under a minute using built-in tools. You do not need special software or technical knowledge.

Once you have the IP address, you type it into your web browser to reach your router's login page, where you can change your Wi-Fi password, network name, security settings, and other options that affect how your network runs.

Key Takeaways

  • Most routers have the IP address printed on a physical sticker on the device itself, usually on the back or bottom.
  • On Windows, you can find your router's IP address by opening Command Prompt and typing ipconfig, then looking for the "Default Gateway" line.
  • On Mac or Linux, open Terminal and type ip route or netstat -nr to see the same information.
  • On iPhone or Android, go to Wi-Fi settings, tap your network name, and look for the "Router" or "Gateway" field.
  • Once you have the address, type it into your web browser's address bar to reach your router's login page.

Check the physical router first

Before you open any menus on your computer, flip your router over or look at the back. Most manufacturers print the default IP address on a label stuck directly to the device. You are looking for a line that says "IP Address", "Default Gateway", or sometimes just a number in the format 192.168.x.x or 10.0.0.x.

The sticker usually also shows the default username and password you need to log in — often "admin" and "admin" or "admin" and a blank password. Write these down or take a photo. If the sticker is missing, faded, or the information does not match what you see later, move to the next method.

Find it on Windows using Command Prompt

Open Command Prompt by pressing the Windows key, typing cmd, and pressing Enter. A black window will open. Type the word ipconfig and press Enter.

You will see a list of network information. Look for the section labeled "Ethernet adapter" or "Wireless LAN adapter" — whichever one you are using to connect to the internet. In that section, find the line that says "Default Gateway". The number next to it is your router's IP address. It will look something like 192.168.1.1 or 192.168.0.1. Close Command Prompt when you are done.

Find it on Mac or Linux using Terminal

On Mac, open Terminal by pressing Command + Space, typing terminal, and pressing Enter. On Linux, open a terminal window from your applications menu. Type one of these commands and press Enter:

ip route (works on most Linux systems) or netstat -nr (works on Mac and some Linux systems)

Look for a line that starts with "default via" or "default" followed by an IP address. That address is your router. It will be in the format 192.168.x.x or 10.0.0.x. Close Terminal when you have written it down.

Find it on your phone

On iPhone: Go to Settings, tap Wi-Fi, then tap the name of your network (the one you are connected to). Scroll down and look for a field labeled "Router" or "Gateway". The IP address will be listed there.

On Android: Go to Settings, tap Wi-Fi, then tap the name of your network. Look for "Gateway" or "Router IP" in the network details. Some Android phones show this information under "Advanced" settings instead. If you do not see it, try a different method — not all Android phones display this field.

Log in to your router using the IP address

Once you have the IP address, open any web browser on a device connected to your network. Click the address bar at the top and type the IP address — for example, 192.168.1.1 — then press Enter. A login page should appear.

Enter the username and password from the sticker on your router, or the defaults for your router model if the sticker is gone. If you do not know the password, check the router's manual or search online for "[your router model] default password". Once you are logged in, you can change your Wi-Fi name, password, security settings, and other network options.

What to do if you cannot find the address

If none of these methods work, restart your router by unplugging it for 30 seconds, then plugging it back in. Wait two minutes for it to fully start up, then try the Command Prompt or Terminal method again. Sometimes the router does not appear in these lists until it has finished booting.

If you still cannot find it, check the router's manual or the manufacturer's website. Search for your router model number — you can usually find it on the device itself or on the box it came in — and look for "default IP address" or "how to access the router". If the router is very old or has been heavily customized, you may need to reset it to factory defaults by holding the reset button for 10 seconds, which will restore the default IP address and login information.

Frequently Asked Questions

Why do I need to know my router's IP address?

You need it to log into your router and change settings like your Wi-Fi password, network name, security type, or port forwarding rules. Without the IP address, you cannot reach the login page.

Is my router's IP address the same as my internet IP address?

No. Your router's IP address (like 192.168.1.1) is internal — it only works on your home network. Your internet IP address is assigned by your internet provider and is visible to websites you visit. They are completely different.

Can someone else see my router's IP address?

People on your Wi-Fi network can see it, but people outside your network cannot. Your router's internal IP address does not leave your home. Your internet IP address is visible to websites, but that is normal and expected.

What if I forgot my router login password?

You can reset the router to factory defaults by holding the small reset button on the back for 10 to 15 seconds. This erases all your settings and restores the default username and password from the sticker. You will need to set up your Wi-Fi name and password again afterward.

Do all routers use the same IP address format?

Most home routers use 192.168.1.1 or 192.168.0.1, but some use 10.0.0.1 or other addresses. The Command Prompt, Terminal, or phone settings methods will show you the exact address your router uses, regardless of the format.