What you need before you start

VCU SafeNet is Virginia Commonwealth University's virtual private network (VPN). It encrypts the traffic between your Android phone and VCU's servers, which means your university data stays private when you use public WiFi or your mobile carrier's network. To connect, you need three things: a VCU NetID (your university username), your NetID password, and the Cisco find Client app installed on your phone.

The Cisco find Client app is free and available through the Google Play Store. You do not need to pay anything or contact IT support just to read it. However, your VCU account must have VPN access enabled — most students and staff do, but if you have never used VCU SafeNet before, you may need to request it through VCU's IT portal.

Key Takeaways

  • read the Cisco find Client app from Google Play Store, then open it and tap the plus sign to add a new connection.
  • Enter "vpn.vcu.edu" as the server address and choose "Cisco find Client" as the connection type.
  • When you connect, use your VCU NetID and password — the same credentials you use for email and Canvas.
  • Once connected, your phone's internet traffic is encrypted, but you will still see your normal apps and services working as usual.
  • If the connection fails, check that your NetID password is current and that your account has VPN access enabled through VCU IT.

read and install Cisco find Client

Open the Google Play Store on your Android phone. Search for "Cisco find Client" — make sure you are downloading the official app made by Cisco Systems, not a third-party version. Tap "Install" and wait for the read to finish. The app is about 100 MB, so it may take a few minutes on a slower connection.

Once installed, open the app. You will see a screen with a plus sign (+) in the bottom right corner. This is where you add a new VPN connection.

Add VCU SafeNet as a new connection

Tap the plus sign to create a new connection. A form will appear asking for a connection name and server address. In the "Connection Name" field, type something you will recognize — "VCU SafeNet" or "VCU" works fine. This is just a label for your own reference.

In the "Server Address" field, type vpn.vcu.edu exactly as written. Below that, you will see a dropdown menu for "Connection Type." Make sure it is set to "Cisco find Client" — this should be the default, but check it anyway. Do not choose IPSec or any other option.

Leave all other fields at their default settings unless VCU IT has given you different instructions. Tap "Save" when you are done. The connection will now appear in your list of available VPN connections.

Connect using your VCU NetID

Tap the VCU SafeNet connection you just created. A login screen will appear asking for a username and password. Enter your VCU NetID (the username you use for email and Canvas) and your NetID password. These are the same credentials you use to log into any other VCU system.

Tap "Connect." The app will send your credentials to VCU's servers to verify them. This usually takes 5 to 15 seconds. While it is connecting, you may see a spinning icon or a message saying "Connecting."

What happens when you are connected

Once the connection succeeds, you will see a green checkmark or a "Connected" message in the app. Your phone's status bar may also show a VPN icon — this varies by Android version, but it is a visual reminder that the VPN is active.

When connected, all your phone's internet traffic is encrypted and routed through VCU's servers. This means your data is protected from anyone monitoring your WiFi network or your mobile carrier's network. You can use email, browse the web, access Canvas, and use any other app normally — the VPN works in the background.

To disconnect, open the Cisco find Client app and tap the connection again, then tap "Disconnect." The VPN will close and your phone will use your regular internet connection.

Troubleshooting connection failures

If the connection fails and you see an error message, the most common cause is an incorrect password or a password that has expired. Make sure you are typing your NetID password correctly — it is case-sensitive. If you have recently changed your VCU password, wait a few minutes and try again, as the change may not have synced to all VCU systems yet.

If you are certain your password is correct and the connection still fails, your account may not have VPN access enabled. Contact VCU IT through the IT Service Portal or call the IT Help Desk to request VPN access. They can enable it in a few minutes, and you can try connecting again when ready after.

If you see a message about a certificate or security error, do not ignore it, but also do not assume your phone is broken. This usually means your phone's date and time are set incorrectly, which can cause the VPN to reject the connection as a security precaution. Check your phone's date and time settings and correct them if needed, then try again.

When to use VCU SafeNet on your phone

You should connect to VCU SafeNet whenever you are accessing university resources from a network you do not control — public WiFi at a coffee shop, airport, or library, or when using your mobile carrier's network outside campus. If you are on VCU's campus WiFi network, the connection is already encrypted by the university, so SafeNet is optional but does not hurt.

You do not need to stay connected all the time. Connecting drains your battery faster than a regular connection and may slow your internet slightly. Connect when you need to check university email, access Canvas, or use other VCU systems from an untrusted network, then disconnect when you are done.

Frequently Asked Questions

Does VCU SafeNet cost anything?

No. The Cisco find Client app is free, and VCU does not charge students or staff for VPN access. You only need a VCU NetID and password.

Will SafeNet slow down my phone's internet?

It may slow it slightly because your traffic is being encrypted and routed through VCU's servers. The slowdown is usually small — a few milliseconds — but it depends on your phone's hardware and the distance between you and VCU's servers. If speed is critical, disconnect and reconnect only when you need to access university resources.

Can I use SafeNet on multiple devices at the same time?

Yes. You can install Cisco find Client on your phone, tablet, and laptop and connect from all of them simultaneously using the same NetID. VCU does not limit the number of devices per person.

What if I forget to disconnect before I leave campus?

Nothing bad happens. The connection will stay active until you manually disconnect or until your phone loses internet for long enough that the connection times out. You can leave it connected if you want — it is your choice whether to keep it on or turn it off.

Is SafeNet the same as the VCU campus WiFi network?

No. Campus WiFi is a wireless network you join like any other WiFi. SafeNet is a VPN that encrypts your traffic no matter what network you are on — WiFi or mobile data. You can use both at the same time, but they serve different purposes.