The fastest way to connect: use the TV's built-in setup menu

When you turn on a new Samsung TV for the first time, it walks you through network setup automatically. On the home screen, go to Settings (the gear icon), then General, then Network. Choose Open Network Settings. The TV will show you a list of wireless networks in range — select yours and enter your Wi-Fi password. That's the whole process for most people.

If you're adding a TV to an existing network, the same path works: Settings > General > Network > Open Network Settings. The TV remembers your password after the first time, so you won't have to type it again unless you change your Wi-Fi password later.

Wired connection (ethernet cable plugged directly into the TV) is more stable than Wi-Fi if your router is close enough. Go to the same Settings menu, but choose Wired instead of the wireless option. Plug in the cable and the TV will detect it automatically.

Key Takeaways

  • Samsung TVs connect through Settings > General > Network, where you select your Wi-Fi network and enter your password.
  • The TV will ask for your Wi-Fi password only once — it stores it for future connections unless you change your network password.
  • A wired ethernet connection is more reliable than Wi-Fi if your router is within cable distance of the TV.
  • After connecting, check that your router's default password has been changed and that you're using WPA2 or WPA3 encryption, not the older WEP standard.

What to check on your router before connecting the TV

Before you hand your network password to the TV, spend two minutes confirming your router is set up defensively. Log into your router's admin panel — usually by typing your router's IP address (often 192.168.1.1 or 192.168.0.1) into a web browser on a computer connected to the same network. Look for the default username and password on a sticker on the router itself or in the manual.

Once you're logged in, find the wireless security settings. Make sure the encryption is set to WPA2 or WPA3, not WEP or an open network. Then change the default admin password — the one you use to log into the router, not your Wi-Fi password. This is the password that controls whether someone can change your network settings remotely. Use something you haven't used anywhere else.

If you're not comfortable logging into the router yourself, ask whoever set up your network to do this check. It takes five minutes and protects everything on your network, not just the TV.

Why the TV needs to know your Wi-Fi password

Samsung TVs connect to Wi-Fi the same way your phone or laptop does — they need your network's password to prove they belong on that network. The TV stores this password in its memory so it can reconnect automatically when you turn it on. This is normal and expected.

What matters is that your Wi-Fi password itself is strong (at least 12 characters, mixing letters, numbers, and symbols) and different from passwords you use anywhere else. If someone breaks into your Wi-Fi, they can see what the TV is doing and potentially access other devices on your network, but they won't have your password to your email or bank account — because you used a different one.

Connecting without a password: guest networks and open networks

Some people set up a separate guest network on their router specifically for devices like TVs, smart speakers, and security cameras. This keeps those devices from seeing your computer or phone. If your router supports guest networks, you can create one with a different password and connect the TV to that instead of your main network.

Do not connect the TV to an open network (one with no password at all). An open network means anyone within range can join, see what devices are on it, and potentially interfere with them. Even if the TV is "just" a TV, an open network is an open door to your home network.

Troubleshooting a connection that won't stick

If the TV connects once but drops the network later, or if it connects to Wi-Fi but can't reach the internet, the problem is usually one of three things: the TV is too far from the router, the router is overloaded, or the TV's network settings got corrupted.

Start by moving the TV closer to the router temporarily and trying again. If that works, the distance is the problem — you may need to move the router, use a Wi-Fi extender, or switch to a wired connection. If moving it doesn't help, restart both the TV and the router: unplug the router for 30 seconds, plug it back in, wait for it to fully boot (usually two to three minutes), then restart the TV the same way.

If the connection still fails, go back to Settings > General > Network and choose Reset Network Settings. This erases the stored password and network information. Then go through the setup process again from scratch. Sometimes the TV's network memory gets corrupted and a fresh start fixes it.

What happens after the TV connects

Once the TV is on your network, it can read software updates, stream video from apps like Netflix or YouTube, and communicate with other devices in your home. Samsung TVs also send usage data back to Samsung — what you watch, when you watch it, and what apps you use. You can limit this in Settings > General > Intelligent Service > Viewing Information Services, but you cannot turn it off completely while using Samsung's services.

If you're concerned about what data the TV collects, read Samsung's privacy policy before you finish setup. It's long, but the key section explains what data goes to Samsung and what stays on your TV. You can make an informed choice about whether that trade-off is acceptable to you.

Connecting a second TV or replacing an old one

If you're adding another Samsung TV to the same network, follow the same setup steps. The new TV will see your network in the list and you'll enter the same Wi-Fi password. Both TVs can be on the network at the same time without conflict.

If you're replacing an old TV with a new one, you don't need to do anything to the router. Just set up the new TV the same way you set up the first one. If you want to remove the old TV from your network records (for example, if you're selling it), log into your router and look for a list of connected devices. You can usually remove old devices from there, though it's not required — they'll just sit in the list unused.

Frequently Asked Questions

Do I need a Samsung account to connect the TV to Wi-Fi?

No. Connecting to Wi-Fi is separate from creating a Samsung account. The TV will ask you to sign in to a Samsung account if you want to use Samsung's streaming apps or services, but you can skip that and still use Wi-Fi for other apps like Netflix or YouTube.

What if I forget my Wi-Fi password?

You can reset your Wi-Fi password by logging into your router's admin panel (the same way you checked the encryption earlier). Find the wireless settings and change the password there. Then go to the TV's network settings and re-enter the new password. If you don't remember the router's admin password either, you'll need to factory reset the router, which erases all its settings — check your router's manual for how to do this.

Can I use a 5GHz network instead of 2.4GHz?

Most Samsung TVs support both 5GHz and 2.4GHz networks. If your router broadcasts both, the TV will usually pick the stronger signal automatically. 5GHz is faster but doesn't travel as far through walls. If the TV keeps dropping the 5GHz connection, switch to 2.4GHz or use a wired connection instead.

Is it safe to leave the TV connected to Wi-Fi all the time?

Yes, as long as your router's encryption is WPA2 or WPA3 and your Wi-Fi password is strong. The TV will use a small amount of power to stay connected, but modern TVs are designed for this. If you want to reduce power use, you can turn off Wi-Fi in the TV's settings when you're not using it, but it's not necessary for security.

What if the TV won't find my network?

Make sure your router is turned on and broadcasting (most routers have a light that shows this). If the network still doesn't appear, restart the TV and try again. If your network name contains special characters or spaces, try renaming it to something simpler (letters and numbers only) in your router settings. Some older Samsung TVs have trouble with certain special characters in network names.