The basic connection: what goes where
Your modem receives internet from your provider's cable or fiber line. Your router takes that internet from the modem and broadcasts it wirelessly to your devices. To connect them, you need one ethernet cable running from a port on the back of your modem to a specific port on the back of your router.
The modem has one port labeled ethernet, LAN, or sometimes just a single port that looks different from the others. The router has multiple ethernet ports on the back — use the one labeled WAN, internet, or uplink. This port is usually a different color (often blue or yellow) from the other ports, which are for devices you want to connect by cable.
Plug one end of the ethernet cable into the modem's ethernet port and the other end into the router's WAN port. That is the entire physical connection. Power on the modem first, wait for its lights to stabilize (usually 30 to 60 seconds), then power on the router and wait another minute or two for it to boot up.
Key Takeaways
- Connect an ethernet cable from your modem's ethernet port to your router's WAN port — this is the only physical connection needed.
- Power on the modem first and wait for its lights to stop changing before you power on the router.
- Once both devices are on, check that the router's internet light is solid or blinking steadily, which means it is receiving signal from the modem.
- If the router has no internet light, restart both devices by unplugging them for 30 seconds, plugging in the modem first, then the router.
- You can now configure the router's wireless network name and password through its admin panel or app, which you access from any connected device.
Checking that the connection is working
Look at the lights on the front of both devices. The modem should have a light labeled internet, online, or WAN that is solid green or solid blue — not blinking, not red, not off. If that light is off or red, the modem is not receiving signal from your provider's line, and the router cannot help that.
The router should have a light labeled internet, WAN, or sometimes just a globe icon. If the modem's internet light is solid and the router's internet light is also solid or blinking steadily, the connection is working. If the router's internet light is off or red, the cable may not be fully seated in the WAN port — unplug it from both ends and push it back in firmly until you hear a click.
Do not worry if you do not see an internet light on the router. Some routers do not have one. If you can see the router's wireless network name appear on your phone or laptop, the router is powered on and ready to configure, regardless of what the lights show.
What to do if the connection fails
If the modem's internet light is off or red, the problem is between your provider's line and the modem, not the router. Check that the cable coming into your home (usually coaxial, thick and round) is screwed firmly into the port on the back of the modem labeled cable in or line in. If it is loose, tighten it by hand. If it is already tight and the light is still off, contact your internet provider — the issue is on their end.
If the modem's light is solid but the router's internet light is off, unplug the ethernet cable from both the modem and the router, wait five seconds, and plug it back in firmly. Make sure you are using the router's WAN port, not one of the other ethernet ports. If you plugged it into the wrong port, the router will not receive internet even though it is physically connected.
If the lights still do not show a connection after 2 minutes, restart both devices. Unplug the modem, wait 30 seconds, plug it back in, and wait for its internet light to become solid. Then unplug the router, wait 30 seconds, plug it back in, and wait another 2 minutes. This clears temporary errors and forces both devices to reconnect from scratch.
Accessing the router's settings to set up your wireless network
Once the router has internet, you can configure it through its admin panel. Open a web browser on any device connected to the router (by ethernet cable or wireless) and type the router's IP address into the address bar. This is usually 192.168.1.1 or 192.168.0.1, but check the sticker on the back of your router or its manual for the exact address.
You will be asked for a username and password. These are printed on the sticker on the back of the router and are different from your wireless network password. The default username is often admin and the password is often admin or password, but check the sticker first. Once you log in, you can change your wireless network name (SSID) and password to something you choose.
Some newer routers have a mobile app instead of a web panel. Check the sticker or manual to see which method your router uses. Either way, the goal is the same: log in with the default credentials, then create a new wireless network name and a strong password that you will use to connect your devices.
Positioning the router for the best wireless signal
The router broadcasts wireless signal in all directions, but walls, metal, and water absorb it. Place the router in a central, elevated location — on a shelf or mounted on a wall in the middle of your home, not in a corner or closet. Keep it away from the microwave, cordless phones, and baby monitors, which broadcast on the same frequency and can cause interference.
If your router has external antennas, position one vertically and one horizontally. This helps devices receive signal no matter how their antennas are oriented. If the router is in a basement or far from where you use devices, you may need a second router or a wireless extender to reach all areas, but start with the router in the best central location first.
Securing your wireless network after connection
Once you are in the router's admin panel, change the wireless network password when ready. Use a password at least 12 characters long with uppercase, lowercase, numbers, and symbols. Write it down or save it somewhere safe — you will need it to connect new devices later.
While you are in the admin panel, change the router's default username and password as well. This prevents anyone on your network from logging into the router and changing your settings. Look for a section labeled admin, system, or security to find where to change these credentials.
Check that the router is set to use WPA2 or WPA3 encryption for the wireless network, not the older WEP or WPA. This setting is usually in a section labeled wireless security or security. WPA2 and WPA3 are much harder to break into than older standards.
Connecting your devices to the wireless network
On your phone, laptop, or tablet, open the wireless network list and look for the network name you just created. Select it and enter the password you set. The device should connect within a few seconds and show a connected status.
If a device does not connect, make sure you are typing the password exactly as you set it — passwords are case-sensitive. If you are still stuck, restart the device and try again. If only one device is having trouble, the problem is with that device, not the router. If no devices can connect, restart the router by unplugging it for 30 seconds and plugging it back in.
Frequently Asked Questions
Can I use a wireless connection between the modem and router instead of a cable?
No. The modem and router must be connected by ethernet cable. Wireless connections between them are not reliable enough for internet delivery. The cable is the only way to may support the router receives a stable signal from the modem.
What if my modem and router are in different rooms?
You will need a longer ethernet cable. They can be 50, 100, or even 150 feet long. Run the cable along the baseboards or through the walls if possible, but do not run it near power lines or through areas where it could be pinched or damaged. A damaged cable can cause connection drops.
Do I need to restart the modem and router every time I restart my computer?
No. Restarting your computer does not affect the modem or router. They stay on and keep broadcasting internet. You only restart them if the internet stops working or if you are changing settings in the router's admin panel.
What does it mean if the router's lights are blinking rapidly?
Rapid blinking usually means the router is sending or receiving data. This is normal and happens when devices are downloading, uploading, or browsing. If the light blinks constantly even when no devices are using the internet, it may indicate a problem, and you should restart the router.
Can I connect devices to the router by ethernet cable instead of wireless?
Yes. You can plug devices like computers, printers, or streaming boxes directly into the other ethernet ports on the router using ethernet cables. These devices will have a wired connection instead of wireless, which is often faster and more stable.