Connect your PS4 using WiFi or ethernet cable

Your PS4 connects to the internet in two ways: WiFi (wireless) or ethernet cable (wired). WiFi is easier to set up if your router is in another room. An ethernet cable gives you a faster, more stable connection if your router is nearby and you play online games or read large files. Most people use WiFi, but if you experience lag during gameplay or slow downloads, switching to ethernet often fixes it.

The setup process is the same either way — you go into your PS4 settings, tell it which network to join, and enter your WiFi password if you chose wireless. The whole process takes about five minutes.

Key Takeaways

  • WiFi setup requires only your network name and password; ethernet requires only plugging in a cable.
  • Ethernet connections are faster and more stable for gaming, but WiFi works fine for most people.
  • Your PS4 will remember your network and reconnect automatically each time you turn it on.
  • If your connection drops or won't connect, restarting your router and PS4 fixes most problems.

Setting up WiFi on your PS4

Go to Settings on your PS4 home screen. Select Network, then Set Up Internet Connection. Choose Use WiFi. Your PS4 will scan for available networks and show you a list of all the WiFi networks in range, including your own.

Find your network name in the list and select it. Your PS4 will ask for your WiFi password — this is the same password you use to connect your phone or laptop to WiFi. Type it in carefully (it is case-sensitive, meaning capital letters matter). Once you enter the correct password, your PS4 will connect and test the connection automatically. You should see a confirmation message that says the connection was successful.

Your PS4 will now remember this network. The next time you turn on your console, it will connect automatically without asking for the password again.

Setting up ethernet on your PS4

Plug one end of an ethernet cable into the ethernet port on the back of your PS4 — it is the port that looks like a wider phone jack. Plug the other end into an available port on your router. Most routers have four or more ethernet ports on the back.

Go to Settings on your PS4 home screen. Select Network, then Set Up Internet Connection. Choose Use a LAN Cable. Your PS4 will detect the cable and test the connection automatically. You should see a confirmation message within a few seconds.

Unlike WiFi, you do not need to enter a password for ethernet. The cable itself is the connection. Your PS4 will use this connection every time it is turned on, as long as the cable stays plugged in.

Choosing between WiFi and ethernet

WiFi is the right choice if your router is more than 20 feet away, if there are walls between your PS4 and router, or if running a cable across your room is not practical. Modern WiFi is fast enough for streaming video, downloading games, and playing online multiplayer games without noticeable lag for most people.

Ethernet is the right choice if your router is in the same room as your PS4, if you play competitive online games where every millisecond matters, or if you regularly read large games (100 GB or more). Ethernet is also more reliable — it will not drop the connection if someone turns on a microwave or uses WiFi on another device nearby.

If you are not sure which one to use, start with WiFi. If you notice your games lag, your downloads are slow, or your connection drops frequently, switch to ethernet and see if it improves.

What to do if your PS4 won't connect

If your PS4 cannot find your network, make sure your router is turned on and your WiFi is enabled. Some routers have a physical WiFi button on the back or front — press it if the light next to it is off. If you just set up a new router, wait two minutes for it to finish starting up before trying to connect your PS4.

If you entered the password and your PS4 says it is incorrect, the most common mistake is typing it wrong. Go back and try again, paying attention to uppercase and lowercase letters. If you are not sure what your password is, check the sticker on the back or bottom of your router — it usually lists the network name and password.

If your PS4 was connected before but suddenly lost the connection, restart both devices. Turn off your PS4 completely (not rest mode). Unplug your router for 30 seconds, then plug it back in and wait for it to fully restart — you will see lights on the front stop blinking. Turn your PS4 back on and try connecting again. This fixes most connection problems.

If you are using ethernet and the connection does not work, make sure the cable is plugged firmly into both the PS4 and the router. Try a different ethernet port on your router — one of the ports may be faulty. If you have a spare ethernet cable, try that instead to rule out a damaged cable.

Testing your connection speed

Once your PS4 is connected, you can check how fast your internet is. Go to Settings, then Network, then Test Internet Connection. Your PS4 will measure your read speed, upload speed, and connection stability. It will show you whether your connection is good enough for gaming and streaming.

Most online games need at least 5 Mbps read speed to run smoothly. If your test shows less than that, you may experience lag. If your read speed is below 10 Mbps and you want to read large games, expect it to take several hours. If your speed is consistently below what you expect, contact your internet provider — they can tell you whether your plan is delivering the speed you are paying for.

Keeping your connection stable

Place your router in a central location in your home, away from walls and metal objects. The farther your PS4 is from the router, the weaker the signal. If you must use WiFi and your PS4 is far from the router, moving the router closer or switching to ethernet will improve your connection more than anything else.

If you share your WiFi with many other devices — phones, laptops, smart TVs — your PS4 may slow down during peak times. Ethernet avoids this problem entirely because it does not share bandwidth with other devices. If you use WiFi and notice slowdowns in the evening when everyone is home, that is usually why.

Restart your router once a month by unplugging it for 30 seconds. This clears out temporary problems and keeps your connection stable. You do not need to do anything to your PS4 — it will reconnect automatically.

Frequently Asked Questions

Can I use both WiFi and ethernet at the same time?

No. Your PS4 will use whichever connection is plugged in or active. If you have an ethernet cable connected, your PS4 will ignore WiFi entirely. If you want to switch from one to the other, go back to Settings and Network and choose a different connection type.

Do I need to enter my password every time I connect?

No. After you enter your WiFi password once, your PS4 stores it and connects automatically. You only need to enter it again if you change your WiFi password or if you forget the network and need to reconnect from scratch.

Why is my read speed slower on PS4 than on my phone?

Your phone and PS4 may be in different locations relative to your router, or your phone may be using a faster WiFi band. Your PS4 may also be downloading in the background while you are testing. Restart your PS4 and test again to get an accurate reading.

What if my router does not have an ethernet port?

Most routers have at least one ethernet port, but very old or very small routers may not. If yours does not, WiFi is your only option. Make sure your router is as close to your PS4 as possible to get the strongest signal.

Can I connect my PS4 to a mobile hotspot instead of WiFi?

Yes. Your PS4 will see your phone's hotspot as a regular WiFi network. Select it from the network list and enter the password. Keep in mind that using your phone's data counts against your mobile plan, and hotspots are usually slower than home WiFi.