The basic path: menu, network, and your WiFi password

Most Samsung TVs made after 2010 can connect to WiFi, but the menu layout varies by model year. The fastest way is to go to your TV's main menu, find the network or WiFi settings, select your network name from the list, and enter your password. The TV will test the connection and tell you if it worked.

If your TV is older than 2010 or does not show a WiFi option in the network menu, it likely has no built-in WiFi radio and will need a separate device — either a Samsung wireless adapter (if your model supports one) or a streaming device like a Roku or Fire Stick that plugs into the HDMI port.

The steps below cover the most common Samsung TV menus from 2010 onward. If your remote looks different or your menu does not match these descriptions, your model may be older or use a different interface — in that case, the adapter section at the end is your next step.

Key Takeaways

  • Samsung TVs from 2010 onward usually have WiFi built in, but you access it through the TV menu, not a button on the remote.
  • You will need your WiFi network name and password before you start, and the TV must be within reasonable range of your router.
  • If the TV menu does not show a network or WiFi option, your model does not have built-in WiFi and will need a separate adapter or streaming device.
  • Connection problems are usually caused by the wrong password, the TV being too far from the router, or the router not broadcasting the network name — try moving the TV closer first.

Finding the network settings on your Samsung TV

Press the Menu button on your remote. On most Samsung TVs, this opens a menu with options like Picture, Sound, Channel, and System. Look for System, Settings, or Network — the exact name depends on your model year.

Once you open System or Settings, look for Network, WiFi, or Internet Connection. Select it. The TV will show you either a list of available networks or a prompt to turn WiFi on. If you see a list of network names, skip to the next section. If you see a toggle or on/off button for WiFi, turn it on first.

Some older Samsung models (2010–2014) hide the network settings under a different path: Menu > System > Network > Wireless. If you cannot find Network under System, try looking under a Setup or Advanced menu instead.

Selecting your WiFi network and entering the password

Once WiFi is on, the TV will scan for available networks and show you a list. Find your network name (also called the SSID) in the list and select it. Your network name is the one you set up on your router — if you do not know it, check a device that is already connected, or look at the sticker on the back or bottom of your router.

After you select your network, the TV will ask for the password. Use the remote to enter it. On most Samsung remotes, you navigate with arrow buttons and select letters with OK or Enter. The password is case-sensitive, so capital letters matter. If you are not sure whether a letter should be capital, check the device that is already connected to your WiFi — most phones show the password in settings if you ask to see it.

After you enter the password, the TV will connect and test the link. You should see a message saying Connected or Internet Connected. If you see an error, go to the troubleshooting section below.

What to do if the TV does not find your network

If your network name does not appear in the list, the TV is either too far from the router or your router is not broadcasting the network name. Move the TV closer to the router — even a few feet can make a difference. Wait 10 seconds and ask the TV to scan again. Most Samsung menus have a Refresh or Rescan button.

If the network still does not appear, log into your router settings from a computer or phone and check whether the SSID broadcast is turned on. Most routers have this setting under WiFi or Wireless settings. If it is off, turn it on and wait a minute for the change to take effect. Then ask the TV to scan again.

If you have a 5 GHz and 2.4 GHz network with the same name, older Samsung TVs (before 2015) may only see the 2.4 GHz version. If you only broadcast 5 GHz, the TV will not find it. Check your router to see whether you can turn on 2.4 GHz as well, or create a separate 2.4 GHz network with a different name.

Fixing connection errors and slow speeds

If the TV finds your network but says the password is wrong, double-check that you entered it correctly. Passwords are case-sensitive. If you are not sure, disconnect another device from your WiFi, then reconnect it and watch what you type — that will show you the exact password. Then try the TV again.

If the password is correct but the TV still will not connect, restart both the TV and the router. Turn off the TV and unplug it for 30 seconds. Unplug the router for 30 seconds as well. Plug the router back in first and wait for it to fully restart (usually 2 to 3 minutes), then plug in the TV. Try connecting again.

If the TV connects but the internet is very slow, move it closer to the router or remove obstacles between them. WiFi signal weakens through walls, metal, and water. If the TV is in a cabinet or behind a large object, moving it even slightly can help. You can also check whether other devices on your network are using a lot of bandwidth — streaming video or large downloads on other devices will slow everything down.

Using a wireless adapter if your TV has no built-in WiFi

If your TV menu has no network or WiFi option, your model does not have built-in WiFi. Samsung sold wireless adapters for some older models — they plug into a USB port on the back of the TV and add WiFi capability. Check your TV's model number (usually on a sticker on the back) and search online for "Samsung wireless adapter [your model number]" to see whether one exists and where to buy it.

If no adapter is available for your model, the simplest solution is a streaming device. A Roku, Amazon Fire Stick, or Google Chromecast plugs into an HDMI port and connects to WiFi on its own. You can then stream content from your phone or use the device's built-in apps. This costs between $30 and $60 and works with any TV, regardless of age.

Frequently Asked Questions

How do I know if my Samsung TV has WiFi built in?

Go to Menu > System > Network and look for a WiFi or Wireless option. If you see it, your TV has WiFi. If the Network menu is empty or does not exist, your TV does not have built-in WiFi. You can also check your TV's model number online — Samsung's website lists the specs for each model.

Why does my TV keep disconnecting from WiFi?

This usually means the TV is at the edge of your router's range. Move the TV closer or move the router to a more central location. If that does not help, restart both devices. If disconnections happen only at certain times, another device may be using too much bandwidth — check whether someone is streaming video or downloading large files elsewhere in your home.

Can I use a 5 GHz network instead of 2.4 GHz?

Newer Samsung TVs (2015 and later) support 5 GHz, but older models do not. If your TV will not connect to 5 GHz, check your router settings and turn on 2.4 GHz as well, or create a separate 2.4 GHz network with a different name for the TV to use.

What if I forgot my WiFi password?

Log into your router from a computer or phone using the router's IP address (usually printed on the router itself). Most routers use 192.168.1.1 or 192.168.0.1. Look for WiFi settings or Wireless settings and find the password field — it may be hidden, but most routers have a Show Password option.

Do I need to do anything special if I change my WiFi password?

Yes. Go back to the TV's network settings, select your network again, and enter the new password. The TV will not automatically update — you have to tell it the new password manually.