The two ways to connect your HP printer, and which one to use

Your HP printer can connect to your home network in two ways: Wi-Fi Direct, which lets devices connect straight to the printer without touching your router, and standard Wi-Fi, which connects the printer to your network like any other device. Standard Wi-Fi is the better choice for most homes because it lets multiple devices print at once, works from anywhere in your house, and keeps the printer behind your router's security settings.

Wi-Fi Direct is useful only if you need to print from a single device in a room where your Wi-Fi is weak, or if you are troubleshooting a connection problem. For everyday use, set up standard Wi-Fi first.

The steps differ slightly depending on whether your printer has a touchscreen. If you are not sure, look at the front panel — if it has buttons and a small display, follow the touchscreen steps. If it has only buttons, follow the button-only steps.

Key Takeaways

  • Standard Wi-Fi connection is faster to set up than Wi-Fi Direct and works better when multiple people in your house need to print.
  • You will need your network name (SSID) and password before you start, so have those ready from your router or your internet bill.
  • HP printers with a touchscreen can find and join your network in under five minutes using the setup wizard.
  • After the printer connects, write down its IP address from the network settings menu — you will need it if the printer stops responding.
  • If the printer cannot find your network, restart both the printer and your router, then try again.

Connecting an HP printer with a touchscreen to Wi-Fi

Press the Home button on the printer's touchscreen (usually in the bottom left corner). Tap Settings, then Network, then Wireless Setup Wizard. The printer will scan for available networks and display a list.

Find your network name in the list and tap it. The printer will ask for your Wi-Fi password. Type it carefully — passwords are case-sensitive, which means uppercase and lowercase letters are different. After you enter the password, tap OK or Done. The printer will connect and show a confirmation message. This usually takes 30 seconds to two minutes.

Once connected, go back to Settings and tap Network again. Look for TCP/IP or Network Status and write down the IP address shown (it looks like four numbers separated by dots, such as 192.168.1.50). Keep this number somewhere safe — you will use it if you need to troubleshoot later.

Connecting an HP printer with buttons only to Wi-Fi

Hold down the Wireless button (usually marked with a Wi-Fi symbol) for three seconds until the light blinks. This puts the printer in pairing mode. On your phone or computer, open your Wi-Fi settings and look for a network name that starts with "HP-" or "DIRECT-". Connect to that network using the default password, which is usually printed on a sticker on the back or bottom of the printer.

Once you are connected to the printer's Wi-Fi, open a web browser and go to 192.168.100.1. This opens the printer's control panel. Look for Network Settings or Wireless Settings. Select Standard Network or Infrastructure Mode (the exact wording varies by model). The printer will now scan for your home network.

Select your network name from the list and enter your Wi-Fi password. The printer will restart and connect to your home network. This process takes two to five minutes. After it finishes, disconnect from the printer's Wi-Fi and reconnect to your regular home network on your device. The printer is now on your network.

What to do if the printer cannot find your network

If the printer scans but does not show your network name, the most common cause is that your router is broadcasting on the 5 GHz band only, and your printer supports only 2.4 GHz. Check your router's settings by logging into it (usually at 192.168.1.1 or 192.168.0.1 in a web browser). Look for a setting called Band or Frequency and make sure 2.4 GHz is turned on. You can leave 5 GHz on at the same time.

If your network name is hidden (not broadcast), you will need to enter it manually instead of selecting it from a list. When the printer asks for your network, look for an option that says Other Network or Manual Entry. Type your network name exactly as it appears, then enter the password.

If the printer still cannot connect, restart both the printer and your router. Turn off the printer completely and unplug it for 30 seconds. Unplug your router for 30 seconds as well. Plug the router back in first and wait for it to fully restart (usually one to two minutes), then plug in the printer and try the connection again.

Printing from your devices after the printer is connected

On Windows, open the printer settings by going to Settings > Devices > Printers and Scanners. Click Add a printer or scanner. Windows will search for printers on your network. When your HP printer appears, click it and then click Add device. Windows will read the driver automatically.

On Mac, go to System Preferences > Printers and Scanners. Click the plus sign at the bottom of the printer list. Find your HP printer in the list, click it, and click Add. The Mac will install the driver.

On iPhone or iPad, printing works automatically through AirPrint — you do not need to install anything. Open any document or photo, tap Share, then Print, and your HP printer will appear in the list if it is on the same network.

On Android, read the HP Smart app from the Google Play Store. Open it, tap the plus sign to add a printer, and select your printer from the list. After that, you can print directly from the app or through the Android print menu in most apps.

Securing your printer on your network

Your printer is now on your home network, which means it should be protected by your router's firewall. However, HP printers have their own admin password that defaults to blank or "admin". Change this password so that someone who gains access to your network cannot change the printer's settings or see documents in its memory.

On a touchscreen printer, go to Settings > Security > Change Admin Password. On a button-only printer, log into the web interface at the IP address you wrote down earlier (for example, 192.168.1.50). Look for Security or Administrator Settings and set a password. Use something you will remember but that is not your Wi-Fi password.

If your printer has a feature called when ready Ink or cloud printing, you can leave it off unless you specifically need to print remotely from outside your home. These features add convenience but also add a connection point that HP's servers can access.

Troubleshooting a printer that loses connection

If your printer connects once but then stops responding after a few days or weeks, the most common cause is that your router assigned it a new IP address. Printers work best when they have a static IP address, which means the router always gives them the same address.

Log into your router (usually at 192.168.1.1 in a web browser). Look for DHCP or Reserved IP Addresses. Find your printer in the list of connected devices and reserve its current IP address. This tells your router to always give the printer the same address. After you do this, the printer should stay connected reliably.

If the printer still drops off, move it closer to the router temporarily to rule out a weak signal. If it stays connected when close, the problem is Wi-Fi range. You can either move the router, add a Wi-Fi extender, or switch to a wired connection if your printer has an Ethernet port (some models do).

Frequently Asked Questions

Can I print wirelessly if my printer is plugged into the router with a cable?

Yes. An Ethernet cable does not prevent wireless printing — it actually makes it more reliable. Your devices will still connect to the printer over Wi-Fi, but the printer itself has a stable wired connection to the network. This is the best setup if your printer is near your router.

What is the difference between my printer's network name and my Wi-Fi network name?

Your Wi-Fi network name (SSID) is broadcast by your router and is what your phone and computer connect to. Your printer's network name is only used during the initial setup when you put it in pairing mode. After setup, the printer joins your Wi-Fi network and uses your router's name, not its own.

Why does my printer keep asking for the Wi-Fi password?

This usually means the printer lost its connection and is trying to reconnect. Check that your Wi-Fi password has not changed recently. If it has, you will need to reconnect the printer using the new password. If the password is the same, restart the printer and router as described in the troubleshooting section.

Can I use Wi-Fi Direct instead of connecting to my home network?

You can, but it is slower and less convenient. Wi-Fi Direct works only when your device is connected directly to the printer, not to your home network. If you need to print from multiple devices or from different rooms, standard Wi-Fi is much better. Use Wi-Fi Direct only for one-time printing from a single device when your home network is down.

Do I need to install software on my computer to print wirelessly?

You need the printer driver, which tells your computer how to talk to the printer. Windows and Mac can usually read this automatically when you add the printer. If automatic installation does not work, visit HP's website, search for your printer model, and read the driver manually. Phones and tablets do not need drivers — they print through built-in wireless printing systems.