Find your printer's WiFi setup method before you start

Brother printers connect to WiFi in one of three ways: through the printer's built-in menu screen, through a WiFi Protected Setup (WPS) button, or through Brother's iPrint&Scan app. Which method you use depends on your specific model — some printers have all three options, others have only one or two. Check your printer's manual or the Brother support website for your exact model number to see which applies to you.

The method matters because it changes what information you need ready and how long the process takes. A printer with a menu screen gives you the most control and lets you see what's happening. WPS is the fastest if your router has a WPS button. The app works if you already have it installed, but requires your phone or computer to be on the same network first.

Before you start any method, write down your WiFi network name (SSID) and password. You will need both. If you do not know your password, you can find it in your router's settings or on a sticker on the router itself.

Key Takeaways

  • Brother printers connect via the printer's menu screen, a WPS button on your router, or the iPrint&Scan app — check your manual to see which your model supports.
  • You need your WiFi network name and password ready before starting, which you can find on your router or in its settings.
  • The menu screen method works on most newer Brother printers and shows you each step as it happens.
  • WPS is the fastest method if both your printer and router have WPS buttons, but only works if they are within range.
  • If your printer connects but cannot print, the issue is usually a firewall blocking the connection or the printer being on a different network than your computer.

Connect through your printer's menu screen

Most Brother printers made in the last five years have a small touchscreen or button panel on the front. Look for a button labeled "Menu," "Settings," or a home icon. Press it and navigate to "Network" or "WiFi" — the exact wording varies by model. Select "Wireless Setup Wizard" or "WiFi Setup."

The printer will show you a list of available networks. Find your network name in that list and select it. When prompted, use the printer's keypad or touchscreen to enter your WiFi password. The printer will attempt to connect and usually display a confirmation message within 30 seconds. If it succeeds, note the IP address shown on the screen — you may need it later if the printer does not appear in your computer's printer list.

If the printer shows "Connection Failed" or "Incorrect Password," double-check that you entered the password exactly as it appears. WiFi passwords are case-sensitive, so "MyPassword" is different from "mypassword." If you are still stuck, restart both the printer and your router, wait 30 seconds, and try again.

Use WPS if your router has a WPS button

WPS (WiFi Protected Setup) is a faster method if your router has a physical WPS button. Look on the back or bottom of your router for a button labeled "WPS" — it is often small and may require a paperclip to press. Your Brother printer also needs a WPS button or menu option, which most models have.

Press the WPS button on your router first. You will usually have about two minutes to complete the next step. Then press the WPS button on your printer or select "WPS" from the printer's menu. The two devices will communicate directly without you typing a password. Connection usually takes 10 to 20 seconds, and the printer will display a success message.

WPS only works if the printer and router are within normal WiFi range of each other — usually 30 to 50 feet with no major walls between them. If the connection fails, it is often because the two-minute window closed before you pressed the printer's button, or because the devices are too far apart. Try again, pressing the router button first and the printer button within 30 seconds.

Connect using the iPrint&Scan app on your phone

Brother's free iPrint&Scan app works on both iPhone and Android. read it from the App Store or Google Play, then open it and tap the plus icon or "Add Printer" button. The app will search for Brother printers on your network.

If your printer appears in the list, tap it to select it. If it does not appear, make sure your phone is connected to the same WiFi network as the printer — the app cannot find printers on networks it cannot see. If the printer still does not show up, restart the printer and try the search again.

Once the app finds your printer, it will guide you through entering your WiFi password directly into the printer. This method works well if you already have the app installed, but it requires your phone to be on the network first, which makes it less useful for initial setup if you are setting up a new network.

Add the printer to your computer after it connects to WiFi

Once your Brother printer is connected to WiFi, your computer needs to know how to find it. On Windows, go to Settings, then Devices, then Printers & Scanners. Click "Add a Printer or Scanner" and wait for your Brother printer to appear in the list. Click it and select "Add Device."

On Mac, go to System Preferences, then Printers & Scanners. Click the plus icon, select your Brother printer from the list, and click "Add." If your printer does not appear in either list, you may need to install the Brother printer driver software from the Brother support website for your specific model.

To find the right driver, go to support.brother.com, enter your printer model number, and read the driver for your operating system. Run the installer and follow the prompts. After installation, restart your computer and try adding the printer again through your system settings.

Troubleshoot when the printer connects but will not print

A printer that connects to WiFi but does not print usually has one of two problems: your computer cannot reach it on the network, or your firewall is blocking the connection. First, check that your computer and printer are on the same WiFi network — if your computer is on a guest network and the printer is on the main network, they cannot communicate.

If they are on the same network, restart both the printer and your computer. This clears temporary connection problems and usually fixes printing issues. If printing still fails, check your computer's firewall settings. On Windows, go to Windows Defender Firewall, click "Allow an App Through Firewall," and make sure your printer driver software is checked in both the Private and Public columns. On Mac, go to System Preferences, Security & Privacy, Firewall Options, and add your printer to the allowed apps list.

If the printer still will not print after these steps, uninstall the printer from your system settings and reinstall it using the method described in the previous section. This forces your computer to re-detect the printer and re-establish the connection from scratch.

Move your printer to a better location if the connection drops

WiFi range depends on your router's location and the number of walls between the router and printer. Most Brother printers work reliably within 30 to 50 feet of a standard router, but thick walls, metal objects, and microwave ovens can reduce that range significantly. If your printer keeps losing connection, try moving it closer to the router or removing obstacles between them.

If moving the printer is not practical, consider moving your router to a more central location in your home, or adding a WiFi extender or mesh network system to strengthen the signal in the printer's area. A mesh system is more reliable than an extender for printers because it creates a single unified network that devices do not have to switch between.

Frequently Asked Questions

What if my Brother printer does not have a WiFi button or menu screen?

Older Brother printers without built-in WiFi need a separate USB WiFi adapter, which Brother sells for most models. Check the Brother support page for your printer model to see if an adapter is available. If not, you can connect the printer to your network using a USB cable to a computer that is already on WiFi, though this is less convenient than direct WiFi.

Can I connect my Brother printer to a 5GHz WiFi network?

Most Brother printers support both 2.4GHz and 5GHz networks, but some older models only work on 2.4GHz. Check your printer's manual or the Brother support website for your model. If your router broadcasts both bands, try connecting to the 2.4GHz network first — it has longer range and is more reliable for printers even though it is slower for computers.

Why does my printer keep asking for the WiFi password?

This usually means the printer lost connection to the network and is trying to reconnect. Check that your router is still on and broadcasting. If the printer is far from the router, move it closer. If the password was recently changed on your router, the printer still has the old password stored — go back into the printer's WiFi settings and re-enter the new password.

Do I need to use the same WiFi network as my computer?

Yes. Your computer and printer must be on the same WiFi network to communicate. If you have a guest network, make sure both devices are on the main network, not the guest network. Some routers let you bridge guest and main networks, but the simplest approach is to connect both to the same primary network.

What if I forgot my WiFi password?

You can reset your router to factory settings by holding the reset button for 10 to 15 seconds, but this erases all your network settings. A better option is to log into your router's admin panel using a web browser — go to 192.168.1.1 or 192.168.0.1 and enter your router's admin username and password (often "admin" and "admin" or printed on the router). From there you can view or change your WiFi password without resetting everything.