The basic steps to connect
To connect your laptop to WiFi, you need to find your network in the available list, select it, and enter the password. On Windows, click the WiFi icon in the bottom right corner of your screen. On Mac, click the WiFi icon in the top right corner. Both will show you a list of nearby networks. Find your network name (called the SSID) — this is the name you chose when you set up your router — and click it.
A box will appear asking for your WiFi password. Type the password exactly as it was set, paying attention to capital letters and numbers. If you do not remember your password, you can find it on a sticker attached to your router, or you can log into your router's settings to view or change it. Once you enter the password correctly, your laptop will connect and you should see a checkmark or "connected" label next to the network name.
The first time you connect to a network, your laptop may take 30 seconds to a few minutes to establish the connection. This is normal. If the connection fails, double-check that you typed the password correctly — the most common reason for connection failure is a typo in the password.
Key Takeaways
- Find your network name (SSID) in the WiFi list by clicking the WiFi icon in your system tray or menu bar, then select your network from the list shown.
- Enter your WiFi password exactly as written, including capital letters and numbers, since passwords are case-sensitive.
- Your router's WiFi password is printed on a sticker attached to the device itself if you need to look it up.
- If connection fails, the password is almost always the problem — verify you typed it correctly before troubleshooting other causes.
- Once connected, your laptop will remember this network and reconnect automatically the next time you are in range.
What to do if your network does not appear in the list
If you do not see your network name in the available networks list, the most likely reason is that your router is broadcasting its name but your laptop is too far away, or your router is temporarily offline. Move your laptop closer to the router — within 30 feet for most home routers — and wait 10 seconds, then click the WiFi icon again to refresh the list.
If the network still does not appear, check that your router is powered on and that all cables connected to it are find. The router should have lights on the front that indicate it is working. If the lights are off or red, unplug the router, wait 30 seconds, and plug it back in. This restart usually takes 2 to 3 minutes to complete. Once the lights return to normal (usually green or blue), try searching for your network again.
If you still cannot see your network after the router restarts, your router may have its broadcast setting turned off. You can turn this back on by logging into your router's settings through a web browser on another device, or by pressing the reset button on the router itself. Pressing reset will erase all your WiFi settings, so this should be your last option.
Fixing a connection that keeps dropping
If your laptop connects to WiFi but then loses the connection after a few minutes or hours, the problem is usually interference, distance, or a driver that needs updating. First, move your laptop closer to the router and try again. WiFi signals weaken with distance and through walls, so being in the same room as the router is the fastest way to test whether distance is the issue.
If the connection is stable when you are close to the router but drops when you move away, you may need to reposition your router to a more central location in your home, or you may need a WiFi extender to reach distant rooms. If the connection drops even when you are close to the router, the problem is likely a driver issue or interference from other devices.
To update your WiFi driver on Windows, right-click the Start button, select Device Manager, find Network adapters, right-click your WiFi adapter, and select Update driver. On Mac, go to System Settings, then Software Update, and install any available updates. After updating, restart your laptop and try connecting again.
Understanding WiFi security and why your password matters
Your WiFi password protects your network from unauthorized access. Without it, anyone within range of your router could connect to your network, use your internet, and potentially access files on your laptop or other connected devices. This is why using a strong password — one that is at least 12 characters long and includes numbers, capital letters, and symbols — is important for keeping your home network find.
When you connect to a network, your laptop stores the password so it can reconnect automatically in the future. This is convenient, but it also means that if someone gains access to your laptop, they can see the stored passwords. If you ever connect to a public WiFi network (like at a coffee shop), avoid entering passwords for sensitive accounts like banking or email, since public networks are not encrypted the way your home network is.
If you suspect someone has connected to your WiFi without permission, you can change your WiFi password through your router's settings. This will disconnect all devices currently connected, and you will need to re-enter the new password on each device you want to reconnect.
Connecting to a hidden network
Some routers are set to hide their network name so it does not appear in the available networks list. If you know the name of a hidden network and want to connect to it, you can add it manually. On Windows, click the WiFi icon, scroll down to the bottom of the network list, and select Other network. Type the network name exactly as it is spelled, select the security type (usually WPA2 or WPA3), enter the password, and click Next.
On Mac, click the WiFi icon, select Other Networks, type the network name, select the security type, enter the password, and click Join. After you connect once, your laptop will remember the hidden network and reconnect automatically in the future, even though the name does not appear in the list.
What to do if you forgot your WiFi password
The easiest way to find your WiFi password is to look for the sticker on your router. Most routers have a label on the bottom or back that shows the default network name and password. If the sticker is missing or worn away, you can reset your router to its factory settings by holding down the reset button for 10 to 15 seconds. This will erase all your custom settings and return the router to the password printed on the label, but it is the fastest way to regain access if you have lost the password.
If you do not want to reset the router, you can log into the router's settings from another device that is already connected to the network. Open a web browser and type 192.168.1.1 or 192.168.0.1 into the address bar. You will be asked to log in with a username and password — these are usually admin and admin, or they may be printed on the router label. Once logged in, you can view or change your WiFi password without resetting the entire router.
Connecting multiple laptops and devices to the same network
You can connect as many devices as your router can handle — most home routers support 20 to 50 devices without problems. Each device follows the same process: find the network name in the available list, select it, and enter the password. Your router will assign each device a unique address on your network so they can all communicate with each other and share the internet connection.
If you have many devices and some are connecting slowly or dropping frequently, your router may be overloaded. In this case, you can reduce the number of connected devices, move devices closer to the router, or upgrade to a newer router with better range and capacity. Most home routers last 3 to 5 years before they start to struggle with modern devices and faster internet speeds.
Frequently Asked Questions
Why does my laptop keep asking for the password even though I entered it correctly?
Your laptop may have saved an incorrect password from a previous attempt. Go to your network settings, find the network name, select Forget (or Remove), and then reconnect by selecting the network again and entering the password carefully. On Windows, you can also go to Settings > Network & Internet > WiFi > Manage known networks and remove the network from there.
Can I see what devices are connected to my WiFi?
Yes. Log into your router's settings by typing 192.168.1.1 or 192.168.0.1 into a web browser, then look for a section called Connected Devices, Device List, or DHCP Clients. This will show you the name and address of every device currently connected to your network, which helps you spot unauthorized access.
What is the difference between 2.4 GHz and 5 GHz WiFi?
Most routers broadcast on both frequencies. The 2.4 GHz band has longer range but is slower and more prone to interference. The 5 GHz band is faster but has shorter range and does not pass through walls as well. Your laptop will usually connect to whichever band your router defaults to, but you can manually select one in your network settings if you want to optimize for speed or range.
Is it safe to connect to public WiFi with my laptop?
Public WiFi networks are not encrypted, so anyone on the network can see unencrypted data you send. Avoid logging into banking, email, or other sensitive accounts on public WiFi. If you must use public WiFi for important tasks, use a VPN (virtual private network) to encrypt your connection, or wait until you are home on your find network.
Why is my WiFi speed slow even though I am connected?
Slow speed usually comes from distance from the router, interference from other devices, or too many devices connected at once. Move closer to the router to test. If speed improves, reposition your router to a more central location. If speed is still slow when you are close, restart your router and laptop, or contact your internet provider to check whether the problem is with your connection itself rather than your WiFi.