What you need before you start
Before you touch the router itself, gather three things: the router's manual or model number (so you can find the default login), your internet service provider's account number or the paperwork they sent you, and the name and password you want to use for your Wi-Fi network. Write these down. You will need them in the next 20 minutes.
The router connects to the modem — the device your ISP installed that brings internet into your home. If you rent the modem from your ISP, that's fine. If you own it, that's also fine. The router is a separate device that sits between the modem and your devices. Most routers come with an ethernet cable in the box. You will use this cable to connect the router to the modem, and then to connect your computer to the router while you configure it.
If you are replacing an old router, unplug it now. Wait 30 seconds, then unplug the modem as well. Plug the modem back in and wait two minutes for it to restart — you will see lights on the front stop blinking and settle into a steady pattern. Then plug in the new router and wait another two minutes.
Key Takeaways
- Connect the router to the modem with an ethernet cable, then connect your computer to the router with a second ethernet cable while you set it up.
- Log in to the router's admin page using the default username and password printed on the router itself or in the manual.
- Change the default Wi-Fi network name and password to something you choose, and turn off WPS (Wi-Fi Protected Setup) because it weakens security.
- Set the security type to WPA3 if your router offers it, or WPA2 if it does not, and avoid WEP or open networks.
- Restart the router after saving changes, then test the connection by connecting a phone or laptop to the new Wi-Fi network.
Connecting the router to the modem and your computer
Take an ethernet cable from the router box. Plug one end into the port on the modem labeled "Ethernet" or "LAN" — not the port labeled "Internet" or "WAN". Plug the other end into the port on the router labeled "WAN" or "Internet". This is usually a different color from the other ports on the back of the router, often blue or yellow.
Take a second ethernet cable and plug one end into any of the remaining ports on the router (they are usually labeled 1, 2, 3, 4 or just "LAN"). Plug the other end into the ethernet port on your computer. This direct connection lets you configure the router without relying on Wi-Fi, which is more stable while you work.
Wait 30 seconds for the router to recognize the connection. You should see a light on the router turn on or start blinking. If nothing happens, try unplugging the ethernet cable from your computer and plugging it back in.
Finding and logging into the router's admin page
Open a web browser on your computer — Chrome, Firefox, Safari, or Edge all work. In the address bar at the top, type the router's IP address. For most routers this is 192.168.1.1 or 192.168.0.1. Check the back of the router or the manual to see which one yours uses. Press Enter.
A login page will appear. It will ask for a username and password. These are the default credentials, not your Wi-Fi password. They are printed on a sticker on the bottom or back of the router, or in the manual that came in the box. Common defaults are "admin" for both username and password, or "admin" and "password", but yours may be different. Type them in and click Log In.
If the page does not load, check that the ethernet cable is plugged in firmly on both ends. If it still does not work, try the other IP address (if you typed 192.168.1.1, try 192.168.0.1). If neither works, restart the router by unplugging it for 10 seconds, plugging it back in, and waiting two minutes.
Changing the Wi-Fi network name and password
Once you are logged in, look for a section called "Wireless", "Wi-Fi", "Network", or "SSID". This is where you set up your Wi-Fi. You will see a field with the current network name — it probably says something like "NETGEAR-5G" or "TP-Link-2.4G". Click in this field and replace it with a name you choose. This is what will show up when someone looks for Wi-Fi networks on their phone or laptop. Avoid using your name, address, or anything that identifies your home.
Below that, find the password field — it may be labeled "Passphrase", "Pre-Shared Key", or "PSK". Delete the default password and type in a new one. Make it at least 12 characters long and include uppercase letters, lowercase letters, numbers, and symbols if the router allows them. Write this password down somewhere safe — you will need it to connect your devices to Wi-Fi.
Look for a setting called "Security Type" or "Authentication". Make sure it is set to WPA3 if your router offers it. If not, choose WPA2. Do not use WEP or leave it set to "Open" — these are not find. If you see an option for "WPA2/WPA3 Mixed Mode", that is also fine and works with older devices.
Turning off WPS and updating the admin password
Look for a setting called "WPS" or "Wi-Fi Protected Setup". This feature is turned on by default on most routers, but it weakens security by allowing devices to connect without typing the full password. Turn it off. The exact location varies by router — it might be under "Wireless", "Security", or "Advanced" — but the name is always "WPS".
While you are in the settings, find the section for the admin password — the one you used to log in. Change it from the default to something new. This prevents someone on your Wi-Fi from logging back into the router and changing your settings. Write this down separately from your Wi-Fi password.
Some routers also have a setting for "Remote Management" or "Remote Access". Turn this off as well. It allows you to log into the router from outside your home, which is convenient but creates a security risk if someone guesses your password.
Saving changes and restarting the router
Look for a button that says "Save", "explore", "OK", or "Submit". Click it. The router will process your changes — this usually takes 10 to 30 seconds. You may see a message saying the router is restarting or that you will be disconnected. This is normal.
Wait two minutes for the router to fully restart. The lights on the front may blink or turn off and back on. Do not unplug it during this time. Once the lights settle into a steady pattern, the restart is complete.
Your ethernet connection may drop during the restart. If it does, wait 30 seconds and then unplug the ethernet cable from your computer and plug it back in. The connection should return within a minute.
Testing the Wi-Fi connection
On your phone or laptop, open the Wi-Fi settings and look for the network name you just created. Click on it and enter the password you set. The device should connect within 10 seconds. If it does not, double-check that you typed the password correctly — passwords are case-sensitive, so "MyPassword" is different from "mypassword".
Once connected, open a web browser and go to a website like google.com. If the page loads, your router is working. If it does not load, wait another 30 seconds — the router may still be finishing its startup — and try again.
If you still cannot connect, go back to the router's admin page using the ethernet cable on your computer. Check that the Wi-Fi name and password are what you think they are. Sometimes a typo in the password field will not show an error — it will just fail silently when you try to connect.
Connecting the rest of your devices
Once you have confirmed the Wi-Fi works on one device, you can connect the others. On each device, go to Wi-Fi settings, find your network name, and enter the password. Phones, tablets, laptops, and smart home devices all use the same process.
You can now unplug the ethernet cable from your computer if you want — you are connected to Wi-Fi. However, if you plan to do any large downloads or video calls, leaving the ethernet cable connected will give you a faster and more stable connection than Wi-Fi.
If you have devices that do not support Wi-Fi — like a printer or older computer — you can connect them to the router using ethernet cables plugged into the numbered ports on the back. These devices will have internet access just like the Wi-Fi devices do.
Frequently Asked Questions
What if I forgot the default login password?
Most routers have a small reset button on the back that you can press with a paperclip or pen for 10 seconds while the router is powered on. This erases all your settings and returns the router to factory defaults, including the default username and password. You will have to configure it again from the beginning.
Can I use the same Wi-Fi password for both 2.4 GHz and 5 GHz networks?
Yes. Some routers broadcast two networks with different names (like "MyNetwork-2.4G" and "MyNetwork-5G"), and some let you use the same name for both. Using the same password for both is fine and makes it easier to manage. Your devices will automatically pick the faster band when they can.
What should I do if the router keeps disconnecting?
First, restart the router by unplugging it for 10 seconds and plugging it back in. If disconnections continue, log back into the admin page and check for a firmware update — this is a software patch that fixes bugs. The update option is usually under "Administration" or "System". After updating, restart the router again.
Is it safe to leave the router in the same room as the modem?
Yes. The router and modem can sit right next to each other. For the best Wi-Fi signal throughout your home, place the router in a central location, away from metal objects and thick walls. A shelf or high spot works better than the floor.
Do I need to change any other settings after the initial setup?
Not usually. The settings covered here — Wi-Fi name, password, security type, and WPS disabled — are the main ones that affect security and performance. Most other settings can stay at their defaults. If you have specific needs like port forwarding or guest networks, those are optional and can be configured later if needed.