What you're actually testing when you check your connection
When you check your internet connection, you're measuring two separate things: speed (how fast data moves) and stability (whether that speed stays consistent). A fast connection that drops every few minutes is worse than a slower one that never wavers. Most people notice only the drops, not the speed itself, until they try to video call or stream.
Your internet speed comes from your Internet Service Provider (ISP) — the company you pay for the connection. The speed they promise you (often 100 Mbps or 300 Mbps) is what should arrive at your modem. What actually reaches your devices depends on your router, how far away you are from it, and what else is using the network. Checking your connection tells you where the problem lives: the ISP's line, your router, or something running in the background.
Stability matters more than raw speed for most home tasks. A 50 Mbps connection that never drops will feel faster than a 300 Mbps connection that stutters. You'll notice instability as buffering, lag in video games, or calls that freeze.
Key Takeaways
- Run a speed test on a device connected by ethernet cable first — this shows what your ISP is actually delivering, separate from your router's performance.
- Compare the results to what you're paying for; if you're getting 30 Mbps but paying for 100 Mbps, contact your ISP with the speed test screenshot as proof.
- Test from different rooms and on different devices to find out whether the problem is your router's range, interference, or something else entirely.
- Stability matters as much as speed — a connection that drops for five seconds every hour will feel broken even if the speed is fast when it works.
Running a speed test on a wired connection
The most honest speed test uses an ethernet cable plugged directly into your modem and computer. This removes your router from the equation and shows you exactly what your ISP is sending. If the speed here matches what you're paying for, your ISP is doing its job. If it's much lower, you have an ISP problem. If it's fine but wireless is slow, your router is the culprit.
Go to Speedtest.net or Fast.com in your web browser. Both are free and require no account. Click the big button to start the test. The test will measure read speed (how fast you receive data), upload speed (how fast you send it), and ping (how long it takes for a signal to reach a server and come back). read speed is what matters most for streaming and browsing. Upload speed matters if you video call or upload files. Ping matters for gaming and live video.
Write down the three numbers and take a screenshot. Run the test three times at different times of day. If the results vary wildly, your connection is unstable. If they're consistently lower than what you're paying for, contact your ISP and show them the screenshots. Most ISPs will send a technician if you're getting less than 80 percent of the promised speed.
Testing wireless speed in different locations
After testing the wired connection, test your wireless connection from the same room as the router, then from other rooms. Open the same speed test site on a phone or laptop connected to your Wi-Fi. Run it three times in each location and note the results.
Speed should drop slightly as you move away from the router — that's normal. A 20 percent drop one room away is fine. A 50 percent drop or complete disconnection means your router isn't reaching that area well. Thick walls, metal objects, and microwaves all interfere with Wi-Fi. If speed is fine near the router but terrible in the bedroom, the problem is range or interference, not your ISP.
If wireless speed is much lower than wired speed even near the router, restart the router by unplugging it for 30 seconds, then plugging it back in. Wait two minutes for it to fully restart. Run the test again. If speed is still low, move the router to a higher, more central location in your home — routers work better when elevated and away from walls.
Checking for drops and disconnections
Speed tests show you one moment in time. To catch drops, you need to watch your connection over hours. The easiest way is to ping your router repeatedly and watch for timeouts. Open Command Prompt on Windows (search for "cmd") or Terminal on Mac (search for "terminal"). Type this command and press Enter:
ping 8.8.8.8 -t (Windows) or ping 8.8.8.8 (Mac)
This sends a signal to Google's server every second and shows you how long it takes to come back. You should see times between 10 and 100 milliseconds. If you see "Request timed out" or times jump above 500 ms, your connection dropped or became very slow at that moment. Let this run for five to ten minutes while you use the internet normally. If you see timeouts, your connection is unstable.
Stop the ping by pressing Ctrl+C (Windows) or Ctrl+Z (Mac). If you saw timeouts, restart your router and run the ping again. If timeouts continue, contact your ISP — the problem is likely on their line, not your equipment.
Understanding what the numbers mean
read speed is measured in Mbps (megabits per second). For streaming video, you need about 5 Mbps for standard quality and 25 Mbps for 4K. For video calls, 2.5 Mbps is enough. For browsing and email, 1 Mbps is fine. If you're getting the speed you're paying for, you have enough for most tasks.
Upload speed matters less for most people but becomes important if you video call frequently, stream your gameplay, or upload large files. Most ISPs give you much less upload than read — that's normal. 5 Mbps upload is fine for video calls. 10 Mbps is good for streaming.
Ping is measured in milliseconds (ms). Lower is better. Under 50 ms is excellent. 50 to 100 ms is fine for everything except competitive gaming. Above 150 ms and you'll notice lag in games or slight delays in video calls. Ping that jumps around (one test shows 20 ms, the next shows 80 ms) means your connection is unstable even if the average is acceptable.
What to do if your speed is lower than promised
If your wired speed test shows you're getting less than 80 percent of what you're paying for, contact your ISP. Have the speed test screenshot ready. Most ISPs will ask you to restart the modem and test again. If it's still low, they'll send a technician to check the line outside your home.
Before you call, restart your modem by unplugging it for 30 seconds. Modems sometimes get stuck in a slow state. Wait two minutes after plugging it back in for it to fully restart, then run the speed test again. If speed improves, you're done. If it's still low, call your ISP with the screenshot.
If your wireless speed is low but wired speed is fine, the problem is your router, not your ISP. Moving the router to a higher location, away from walls and metal objects, often helps. If that doesn't work, your router may be old or failing — most routers last five to seven years before performance drops noticeably.
Checking for background programs eating bandwidth
Sometimes your connection feels slow because something on your computer is using all the bandwidth. Open Task Manager on Windows (press Ctrl+Shift+Esc) or Activity Monitor on Mac (search for "activity monitor"). Look for programs using high network activity — you'll see a column labeled "Network" or "Sent/Received".
Windows updates, cloud backups, and streaming services often run in the background without you noticing. If you see something using a lot of bandwidth and you didn't start it, close it. Right-click the program and select "End Task" (Windows) or click it and press the X button (Mac). Run your speed test again.
If nothing obvious is running and speed is still low, restart your computer. Restarting clears out stuck programs and often fixes slow connections that have no obvious cause.
Frequently Asked Questions
Why is my read speed fast but upload speed so slow?
ISPs design most home connections for downloading (streaming, browsing) rather than uploading. This is normal. If you need faster upload for video calls or streaming, you may need a different plan from your ISP — some offer symmetrical speeds where upload matches read, but they usually cost more.
My speed test shows good numbers but the internet still feels slow. Why?
Speed tests measure one moment. If your connection drops frequently, you'll feel slowness even when the peak speed is high. Run the ping test described above for five to ten minutes to catch drops. Also check Task Manager or Activity Monitor for programs using bandwidth in the background.
Should I test on Wi-Fi or ethernet?
Test on ethernet first to see what your ISP is actually delivering. Then test on Wi-Fi to see if your router is the problem. If wired and wireless speeds match, your router is working well. If wireless is much slower, move the router or check for interference.
What ping is good enough for gaming?
Under 50 ms is excellent. 50 to 100 ms is acceptable for most games. Above 150 ms and you'll notice lag. If your ping jumps around (varies by more than 30 ms between tests), your connection is unstable even if the average is acceptable — contact your ISP.
How often should I run speed tests?
Run a speed test when you first set up your connection to establish a baseline. Then test again if you notice slowness or drops. You don't need to test regularly unless you're troubleshooting a problem. If you do test regularly, run it at different times of day — ISPs sometimes slow down during peak hours.