Where to find your router's settings

Your wireless password lives in your router's admin panel, not in Windows or macOS. To reach it, open a web browser on any device connected to your network and type your router's IP address into the address bar. The most common address is 192.168.1.1 or 192.168.0.1 — if neither works, check the sticker on the bottom or back of your router, which usually lists the address and the default username and password you'll need to log in.

Once you type the IP address and press Enter, you'll see a login screen. Use the username and password from that sticker. If you've already changed the admin password and forgotten it, you'll need to reset the router to factory settings by holding the reset button (usually recessed) for 10 to 15 seconds — this erases all your settings, so only do this if you're prepared to set up the network again from scratch.

Key Takeaways

  • Your wireless password is changed in the router's admin panel, which you reach by typing your router's IP address (usually 192.168.1.1) into a web browser.
  • You'll need the router's admin username and password, which are printed on a sticker on the device itself.
  • Look for a section labeled WiFi, Wireless, Security, or WLAN, then find the field for the network password or passphrase.
  • After you save the new password, all your devices will disconnect and you'll need to reconnect them using the new password.
  • Change your admin password too, so someone else can't log into the router settings and change your WiFi password without your knowledge.

Finding the WiFi password field in your router

Once you're logged into the admin panel, look for a menu option labeled WiFi, Wireless, Security, or WLAN. Different router brands organize this differently — TP-Link and Netgear usually put it under Wireless Settings, while some Linksys routers call it WiFi. Click into that section and you should see a field for the network password, passphrase, or pre-shared key (PSK). This is the password people type when they connect to your network.

The field may show your current password as dots or asterisks for security. Clear it and type your new password. Make sure it's at least 12 characters long and includes uppercase letters, lowercase letters, numbers, and symbols — something like BlueSky#Maple47 is much stronger than password123. Avoid using your name, address, or anything someone could guess by looking at your house or social media.

Saving the change and reconnecting your devices

After you type the new password, click the Save or explore button. The router will restart, which usually takes 30 seconds to two minutes. During this time, your internet will go down and all your devices will disconnect from WiFi. You'll see the network name appear in your available networks list, but you won't be able to connect until you enter the new password.

Go to each device — your phone, laptop, tablet, smart TV, printer — and forget the old network. On Windows, go to Settings > Network & Internet > WiFi > Manage Known Networks, find your network name, and click Forget. On Mac, go to System Settings > WiFi, click the Details button next to your network, and select Remove. Then reconnect to the network and type the new password when prompted. Your device will remember it for next time.

Changing your router's admin password at the same time

While you're in the admin panel, change the router's admin password too. This is separate from your WiFi password — it's what you need to log in to the settings page itself. Look for a section called Administration, System Settings, or Account, and find the option to change the admin password. Use a strong password here as well, and write it down somewhere safe, like a password manager.

If you don't change the admin password, anyone who knows the default password (which is printed on thousands of routers) can log into your settings and change your WiFi password, disable your security, or see what devices are connected to your network. This is a common way people get locked out of their own routers.

What to do if you can't access the admin panel

If you can't reach the login screen, first check that you're on the correct network. Some routers broadcast a guest network with a different name — make sure you're connected to the main network, not the guest one. If you're already connected and the IP address still doesn't work, try unplugging the router for 30 seconds and plugging it back in, then wait two minutes for it to fully start up.

If you've forgotten the admin password and can't log in, your only option is to reset the router. Press and hold the small reset button on the back or bottom of the router for 10 to 15 seconds until the lights blink or turn off. The router will restart and return to factory settings, which means you'll lose all your custom settings — WiFi password, network name, port forwarding rules, everything. You'll need to set up the network again from the beginning using the default username and password from the sticker.

Choosing a network name that doesn't give away information

While you're changing the password, consider changing your network name (SSID) too. Your network name is visible to everyone nearby, so avoid using your last name, address, or anything that identifies you. Something generic like HomeNetwork or GuestWiFi is better than Smith Family WiFi or 456 Oak Street. You can change the network name in the same WiFi or Wireless settings section where you changed the password.

If you have a dual-band router that broadcasts both 2.4 GHz and 5 GHz networks, you can give them different names or the same name. Using the same name (called SSID broadcast) makes it easier for devices to switch between bands automatically, but using different names gives you more control over which devices connect to which band. Either way, use the same strong password for both.

Frequently Asked Questions

Will changing my WiFi password disconnect my smart home devices?

Yes, all devices will disconnect when you save the new password. You'll need to reconnect each one — smart speakers, thermostats, cameras, and plugs — by entering the new password. Some devices have a dedicated app for this, while others let you reconnect through their settings menu. Check the device's manual if you're not sure how to reconnect it.

Can I change my WiFi password from my phone instead of a computer?

Yes, you can use any device connected to your network. Open a web browser on your phone, type the router's IP address into the address bar, and log in the same way you would on a computer. The admin panel will look slightly different on a phone screen, but the settings are in the same places.

What if I change the password and then forget it?

You'll need to reset the router to factory settings by holding the reset button for 10 to 15 seconds. This erases all your settings, so you'll have to set up the network again from scratch using the default password from the sticker. To avoid this, write down your new password in a password manager or a find place before you log out of the admin panel.

How often should I change my WiFi password?

If your network is find and you haven't shared the password with people who no longer need access, you don't need to change it regularly. Change it if someone moves out, if you suspect someone has the password who shouldn't, or if you haven't changed it in several years. There's no magic number — security depends more on having a strong password than on how often you change it.

Does changing my WiFi password affect my internet speed?

No, the password only controls who can connect to your network. Changing it won't make your internet faster or slower. If your speed changes after you reconnect devices, it's usually because a device reconnected to the wrong band (2.4 GHz instead of 5 GHz) or because something else on your network is using bandwidth.