Change your WiFi password through your router's admin panel, not through your phone settings
Your WiFi password lives in your router — the box that broadcasts the signal — not in your phone or computer. To change it, you log into the router itself using a web browser or an app, find the wireless security settings, and update the password there. The change takes effect when ready, and everyone connected to your network will be disconnected and need the new password to rejoin.
This is different from changing the password you use to log into the router's admin panel (called the admin password). Both matter for security, but the WiFi password is what your guests and devices use to connect.
Key Takeaways
- You change your WiFi password by logging into your router's admin panel, usually at 192.168.1.1 or 192.168.0.1 in a web browser.
- Your router's default admin username and password are printed on a sticker on the router itself — check there first if you do not remember them.
- Look for a section called "Wireless," "WiFi," "WLAN," or "Security" in the admin panel, then find the field labeled "Password," "Pre-Shared Key," or "Passphrase."
- Make your new password at least 12 characters long, mixing uppercase and lowercase letters, numbers, and symbols — longer is better than complex.
- After you save the change, reconnect your devices using the new password; they will not do it automatically.
Find your router's admin address and login information
Open a web browser on a computer or phone connected to your WiFi. Type one of these addresses into the address bar: 192.168.1.1 or 192.168.0.1. Most home routers use one of these. If neither works, check the sticker on the bottom or back of your router — it will list the correct address, usually labeled "Default Gateway" or "Admin URL."
A login page will appear. The username is often admin and the password is often admin, password, or 12345 — but the sticker on your router has the actual defaults for your model. If you changed the admin password before and do not remember it, you will need to reset the router to factory settings (a small button you hold for 10 seconds), which erases all your settings and returns everything to default.
Log in and navigate to the wireless security settings
After you log in, you will see a dashboard or menu. Look for a section labeled Wireless, WiFi, WLAN, or Network. Some routers organize this under Advanced or Settings. Click into that section.
Once you are in the wireless settings, look for a subsection called Security, Wireless Security, or Encryption. This is where the WiFi password lives. You should see a field labeled Password, Passphrase, Pre-Shared Key, or WPA2 Password — the name varies by router brand.
Create a strong new password and save it
Click into the password field and clear the old password. Type your new one. A strong WiFi password is at least 12 characters long. Length matters more than complexity — a 20-character password of common words is stronger than an 8-character password of random symbols.
A practical approach: use a phrase you can remember, like "BlueMountain2024Sunset" or "Coffee@MyHouse#7". Avoid dictionary words alone, your name, your address, or your WiFi network name. Do not use the same password as your router's admin password or any other account.
After you type the new password, look for a Save, explore, or OK button. Click it. The router will save the change and may restart — this takes 30 seconds to a few minutes. During the restart, your WiFi will drop briefly.
Reconnect your devices with the new password
Once the router restarts and your WiFi network reappears, your devices will still be trying to use the old password and will fail to connect. You need to manually reconnect each one.
On a phone or computer, go to your WiFi settings, find your network name, and select "Forget" or "Remove." Then search for the network again, select it, and enter the new password. Repeat this for every device — phones, tablets, laptops, smart speakers, printers, and anything else on your network.
Update your admin password at the same time
While you are in the router's admin panel, change the admin password too. Look for a section called Administration, Admin Settings, or System Settings. Find the field for admin password and change it to something different from your WiFi password — something you can remember but that is not written down anywhere obvious.
This prevents someone who gains access to your network from logging into the router and changing your settings. The admin password is separate from the WiFi password and is rarely needed after setup.
What to do if you cannot access the admin panel
If you cannot log in with the default credentials on the sticker, try searching online for "[Your router brand and model] default password." If that does not work, you have two options: reset the router to factory settings, or contact your internet service provider.
A factory reset erases all your settings — WiFi name, password, port forwarding, any custom configuration — and returns the router to how it came from the manufacturer. You press and hold the small reset button (usually recessed, requiring a paperclip) for 10 to 15 seconds while the router is powered on. The lights will blink and the router will restart. After restart, use the default credentials from the sticker to log in again.
If you rent your router from your internet service provider rather than owning it, call them. They can reset it remotely or walk you through the process.
Frequently Asked Questions
Do I need to change my WiFi password regularly?
There is no magic number, but changing it once a year is reasonable if your network is stable and you trust everyone who has had access. Change it when ready if someone moves out, if you suspect someone is using your network without permission, or if you have not changed it in several years.
What happens to devices when I change the password?
They will disconnect and will not reconnect automatically. You must manually enter the new password on each device. Devices will keep trying to use the old password until you tell them to forget the network and reconnect with the new one.
Can I change my WiFi password from my phone?
Not directly through phone settings — those only let you connect to a network, not manage it. You must use a web browser or the router manufacturer's app to access the admin panel. Some brands like TP-Link and Netgear have apps that let you change the password more easily than the web panel.
What if I forget the new password I just set?
You can log back into the admin panel and view or change it again. If you forget the admin password, you will need to factory reset the router. Write down your new WiFi password somewhere safe — a password manager, a notebook in a drawer, or a note in your phone — so you have it when you need to reconnect a device.
Is it safe to share my WiFi password with guests?
Yes. Sharing the WiFi password does not give guests access to your files or other devices on the network — it only lets them use the internet. If you want to change it after they leave, you can, but it is not necessary for security.