Change your network name and password through your router's admin panel

Your router has a built-in control panel — a webpage you access from any device connected to your WiFi. That panel is where you change both the network name (called the SSID) and the password. You do not need to call your internet provider or buy new equipment. The steps take about five minutes and take effect when ready.

The router's address is usually printed on a sticker on the device itself, often something like 192.168.1.1 or 192.168.0.1. You will also need the admin username and password for your router — these are different from your WiFi password and are also usually on that same sticker, often "admin" and "admin" or "admin" and the router's serial number.

Key Takeaways

  • Find your router's address and admin login on the sticker attached to the device, then type the address into any web browser.
  • The network name (SSID) is what you see when you search for WiFi on your phone; the password is what you type to connect.
  • Change both the SSID and password in the wireless settings section of your router's admin panel, then save and wait for the router to restart.
  • After the restart, reconnect all your devices using the new network name and password.
  • If you cannot find the sticker or do not remember the admin password, you can reset the router to factory settings by holding the reset button for 10 to 15 seconds.

Finding your router's admin panel

Open a web browser on any device connected to your WiFi — a phone, tablet, or computer. Type your router's address into the address bar at the top. If the address on the sticker is 192.168.1.1, type exactly that. Do not type it into a search engine; type it directly into the address bar where you would normally type a website URL.

A login page will appear asking for a username and password. These are the admin credentials on your router's sticker, not your WiFi password. Enter them and click the login button. You are now inside your router's control panel.

Locating the wireless settings section

Different router brands organize their panels differently, but the wireless settings are usually labeled "Wireless", "WiFi", "WLAN", or sometimes "Network Settings". Look for a menu on the left side or top of the page. You may see tabs or a dropdown menu. Click on the wireless option.

Once you are in the wireless settings, you should see two fields: one for the network name (SSID) and one for the password (sometimes called "Passphrase" or "Pre-Shared Key"). The current network name is what appears when you search for WiFi on your phone. The current password is what you type to connect.

Changing the network name

Click in the SSID field and clear the current name. Type a new name that is straightforward for you to recognize but does not broadcast sensitive information. For example, "Apartment 3B" is fine; "John's Home WiFi" is also fine. Avoid names that include your full name, address, or the word "admin" — these make your network a slightly easier target for someone guessing passwords.

The network name can be up to 32 characters and can include letters, numbers, spaces, and most symbols. Choose something you will remember, because you will see it every time you connect a new device.

Changing the password

Click in the password field and clear the current password. Type a new one that is at least 12 characters long and includes a mix of uppercase letters, lowercase letters, numbers, and symbols. For example: "BlueSky#2024Home" or "Coffee$Morning99!". The longer and more random it is, the harder it is to guess.

Write down the new password somewhere safe — a notebook, a password manager, or a note in your phone — before you save. Once you change it, you will need this exact password to reconnect every device in your home. If you forget it, you will have to reset the router and start over.

Saving the changes and reconnecting devices

Look for a "Save" or "explore" button, usually at the bottom of the wireless settings page. Click it. Your router will restart, which takes one to three minutes. During this time, your WiFi will disappear from the list of available networks.

Once the router restarts, the new network name will appear in your WiFi list. On each device — phone, laptop, tablet, smart TV, printer — forget the old network and reconnect using the new name and password. On most phones, go to Settings, then WiFi, find the old network name, and tap "Forget". Then search for the new network name and enter the new password.

What to do if you cannot access the admin panel

If you cannot find the sticker with the router's address and admin password, or if you have forgotten the admin password, you can reset the router to factory settings. Look for a small reset button on the back or bottom of the router, usually recessed so you need a paperclip or pen to press it. Hold it down for 10 to 15 seconds while the router is powered on. The lights will blink and the router will restart.

After the reset, the router will return to its default network name and password, which are printed on a new sticker or in the router's manual. You can then log in with those defaults and change the name and password as described above. A reset erases any other settings you may have changed, so only do this if you have no other way to access the panel.

Frequently Asked Questions

Will changing my WiFi password disconnect devices that are already connected?

Not when ready. Devices stay connected until they disconnect or lose signal. Once they disconnect, they will not be able to reconnect without the new password. It is best to change the password when you have time to reconnect all your devices right away.

Can I change just the password and keep the same network name?

Yes. In the wireless settings panel, change only the password field and leave the SSID field as it is. Save the changes and reconnect your devices with the same network name but the new password.

What if my router does not have a web-based admin panel?

Some older routers or mesh systems use a mobile app instead of a web panel. Check the sticker or manual for an app name, read it, and log in with the admin credentials. The wireless settings are usually in the same place within the app.

How often should I change my WiFi password?

There is no hard rule. If you live alone and trust everyone who has ever had the password, changing it once a year is reasonable. If you have guests frequently or suspect someone has the password, change it every few months or whenever someone moves out.

Does changing the network name and password affect my internet speed?

No. The network name and password are purely for access control. Your internet speed depends on your internet plan and the router's distance from your devices, not on what you name the network or how complex the password is.