Change your router password through the admin panel, which you reach by typing your router's IP address into a web browser
Your router has two passwords: one for your Wi-Fi network (the one guests use) and one for the admin panel (the one that controls the router itself). Most people only change the Wi-Fi password and leave the admin password at the factory default. That is the security gap. Someone on your network or within range can guess the default admin password, log into your router, and change your settings, see what devices are connected, or redirect your traffic.
The admin panel is where you actually control your router. To reach it, you type your router's IP address — usually 192.168.1.1 or 192.168.0.1 — into the address bar of any web browser on the same network. You will be asked for a username and password. If you have never changed these, they are the factory defaults printed on a sticker on the back or bottom of your router, or in the manual that came with it.
Once you are logged in, look for a section called "Administration," "System Settings," "Advanced," or "Security." The exact name varies by manufacturer. Inside that section, you will find the option to change the admin password. Change it to something you have not used elsewhere, write it down somewhere safe (a password manager is ideal), and save the change. Your router will restart, which takes a minute or two.
Key Takeaways
- Your router has an admin password separate from your Wi-Fi password, and most routers ship with a default admin password that is straightforward to guess.
- You reach the admin panel by typing your router's IP address (usually 192.168.1.1) into a web browser, then logging in with the default username and password from the sticker on your router.
- Change the admin password to something unique in the Administration or System Settings section, then save and let the router restart.
- If you forget the new admin password, you can reset the router to factory defaults by holding the reset button for 10 to 15 seconds, but this erases all your settings.
Finding your router's IP address and default login
If you do not know your router's IP address, you can find it on Windows by opening Command Prompt and typing ipconfig, then looking for the line that says "Default Gateway" — that is your router's address. On Mac, open System Preferences, go to Network, select your Wi-Fi connection, and click Advanced. The router address is listed under TCP/IP.
The default username is often admin, and the default password is often admin, password, or 12345 — but it depends on your router brand. Check the sticker on the back of your router first. If the sticker is worn or missing, search online for "[your router model] default password." Most manufacturers publish this information because they know people lose it.
Once you have the IP address and default credentials, type the IP address into your browser's address bar (for example, http://192.168.1.1) and press Enter. You should see a login screen. Enter the default username and password. If nothing happens, try the other common defaults, or try leaving the username blank and entering only the password.
Navigating the admin panel to change the password
After you log in, you will see a dashboard with tabs or a menu on the left side. The location of the password change option varies widely. On some routers it is under "Administration" or "System Administration." On others it is under "Advanced" or "Settings." A few brands put it under "Security" or "User Management." If you cannot find it, look for a section that mentions "password," "login," or "credentials."
Once you find the right section, you will usually see a field for the current admin password and a field for the new password. Enter a password that is at least 12 characters long and includes uppercase letters, lowercase letters, numbers, and symbols. Avoid passwords based on your name, address, or anything else someone could guess from your social media. Do not use the same password as your Wi-Fi network password or any password you use elsewhere.
After you enter the new password and click Save or explore, the router will restart. This takes one to three minutes. During this time, your Wi-Fi will drop and come back on. You do not need to do anything — just wait. Once the router is back online, your new admin password is active.
Changing your Wi-Fi password at the same time
While you are in the admin panel, you should also change your Wi-Fi password if you have not done so recently or if you used the default one that came with the router. Look for a section called "Wireless," "Wi-Fi," or "Network." You will see the name of your network (the SSID) and the password field next to it.
Change the Wi-Fi password to something different from your admin password. This is the password you give to guests and devices you want to connect. Make it at least 12 characters, but it does not have to be as complex as the admin password — you will be typing it into phones and tablets. Write it down or store it in a password manager so you can find it later when a guest asks or when you add a new device.
Save this change as well. Your router will restart again, and all your connected devices will lose Wi-Fi for a moment. They will not automatically reconnect — you will need to go to each device's Wi-Fi settings, forget the old network, and reconnect using the new password. Start with the devices you use most often.
What to do if you forget the new admin password
If you change the admin password and then forget it, you have one option: reset the router to factory defaults. On the back or bottom of your router, there is a small reset button, usually recessed so you cannot press it by accident. Use a paperclip or the tip of a pen to hold it down for 10 to 15 seconds while the router is powered on. The lights will blink, and the router will restart.
After the reset, the router will be back to its factory settings. Your Wi-Fi network will have the default name and password again, and you will be able to log into the admin panel with the default credentials. You will need to set up your network again from scratch — change the Wi-Fi password, change the admin password, and reconfigure any other settings you had customized.
To avoid this, write down your new admin password in a password manager like Bitwarden, 1Password, or KeePass as soon as you create it. A password manager stores passwords encrypted and syncs them across your devices, so you can look up the admin password whenever you need it without writing it on a sticky note.
Why changing the admin password actually matters for your security
The admin password protects your router from being changed by someone else on your network. If a guest, a family member, or someone who has broken into your Wi-Fi knows the default admin password, they can log in and change your settings without your knowledge. They could redirect your traffic to a fake website, disable your firewall, or change the DNS servers so that all your web requests go through their computer first.
Changing the admin password does not make your network unhackable, but it raises the bar. Someone would have to guess or crack a password you chose, rather than using a password that is printed on thousands of routers and published online. It is one of the easiest security steps you can take, and it takes less than five minutes.
The Wi-Fi password is also important, but for a different reason. It keeps people outside your home from connecting to your network without permission. The admin password keeps people inside your network from taking control of the router itself. Both matter.
Frequently Asked Questions
What if I cannot log into the admin panel with the default password?
Try the three most common defaults: admin/admin, admin/password, and admin/12345. If none of those work, search online for your router model number plus "default password." If you still cannot find it, reset the router to factory defaults using the reset button, then log in with the defaults and change the password when ready.
Do I need to change the admin password if I live alone?
It depends on your risk tolerance. If you live alone and never have guests on your Wi-Fi, the risk is lower. But service technicians, repair people, and delivery workers sometimes ask for Wi-Fi access. Changing the admin password takes five minutes and costs nothing, so most people do it anyway.
Can I use the same password for the admin panel and the Wi-Fi?
Technically yes, but it is not a good idea. The Wi-Fi password gets typed into many devices and is seen by guests. The admin password should stay private. Using different passwords means that if someone learns your Wi-Fi password, they still cannot access the router settings.
What happens to my internet if I change the admin password?
Nothing. The admin password controls access to the router's settings, not the internet connection itself. Your internet will keep working normally. The only thing that changes is that you will need the new password if you want to log into the admin panel again.
How often should I change the admin password?
Once when you first set up the router, and again if you suspect someone has accessed it or if you have had guests with extended access to your home. You do not need to change it every month. A strong password that you have not shared is usually enough.