What NAT type means and why it matters for your Xbox

NAT type is a network setting that controls how your Xbox connects to other players online. Your router sits between your Xbox and the internet, and NAT (Network Address Translation) is how it decides which incoming game traffic goes to your console and which goes elsewhere. An "Open" NAT type means your Xbox can accept incoming connections easily. A "Moderate" NAT type means some connections work but others are slower or fail. A "Strict" NAT type means your Xbox has trouble connecting to other players, and you may experience lag, disconnections, or be unable to join certain game sessions.

You cannot change your NAT type directly on the Xbox itself — it is a router setting, not a console setting. What you can do is adjust your router's configuration to make your Xbox's connection more open. This involves telling your router to forward certain ports to your console, or enabling a feature called UPnP that does this automatically.

Key Takeaways

  • NAT type is set by your router, not your Xbox, so you will need to log into your router's settings using a web browser or app.
  • The easiest first step is to enable UPnP on your router, which automatically opens ports for your Xbox without manual configuration.
  • If UPnP does not work, you can manually forward ports 3074 (TCP and UDP) to your Xbox's local IP address through your router's port forwarding menu.
  • Your Xbox's local IP address (the one on your home network) is different from your public IP address (the one the internet sees), and you need the local one for port forwarding.
  • Changing NAT type improves connection speed and stability but does not create a security risk if you are only opening ports that Xbox needs.

Find your Xbox's local IP address

Before you change any router settings, you need to know your Xbox's address on your home network. On your Xbox, go to Settings > General > Network settings > Advanced settings. Write down the number listed as "IPv4 address" — it will look something like 192.168.1.50 or 10.0.0.25. This is your Xbox's local IP address, and it is what you will use if you need to set up port forwarding.

Keep this number handy. You will need it in the next steps.

Enable UPnP on your router first

UPnP (Universal Plug and Play) is a feature that lets devices like your Xbox automatically tell your router to open the ports they need. It is the easiest way to improve NAT type because you do not have to manually configure anything. Most routers have UPnP turned on by default, but it may be disabled.

To check, open a web browser on any device connected to your home network and type your router's IP address into the address bar. This is usually 192.168.1.1 or 192.168.0.1, but check the sticker on the back of your router if neither works. Log in with your router's username and password (also on the sticker, or in the manual). Look for a menu option called UPnP, Universal Plug and Play, or NAT-PMP. If it is already enabled, you are done — restart your Xbox and check your NAT type again in Settings > General > Network settings.

If UPnP is disabled, turn it on and save the changes. Your router will restart, which takes a few minutes. After it comes back online, restart your Xbox and check the NAT type again. For many people, this single step changes NAT type from Moderate to Open.

Manually forward ports if UPnP does not work

If enabling UPnP does not improve your NAT type, or if your router does not have UPnP, you can manually tell your router to send Xbox traffic directly to your console. This is called port forwarding.

Log into your router again using the same steps above. Look for a menu called Port Forwarding, Port Mapping, Virtual Server, or Gaming — the name varies by router brand. You will see a form asking for a port number, a protocol (TCP, UDP, or both), and a destination IP address. Enter the following:

  • External port: 3074
  • Internal port: 3074
  • Protocol: Both (or create two entries, one for TCP and one for UDP)
  • Destination IP address: Your Xbox's local IP address from the first step

Save the rule and restart your router. After it comes back online, restart your Xbox and check the NAT type again. Port 3074 is the main port Xbox uses for online play, and forwarding it directly to your console usually opens your NAT type.

Check your NAT type after making changes

After you enable UPnP or set up port forwarding, give your Xbox a few minutes and then check whether the NAT type has changed. Go to Settings > General > Network settings > Test NAT type. The test will run for about a minute and show you the result.

If it now shows "Open", your connection is optimized and you should see faster matchmaking and more stable gameplay. If it still shows "Moderate" or "Strict", try restarting both your router and your Xbox completely — turn them off, wait 30 seconds, and turn them back on. Sometimes the changes take a moment to take effect.

What to do if NAT type is still not improving

If your NAT type remains Moderate or Strict after trying UPnP and port forwarding, the issue may be outside your router. Some internet service providers use a system called Carrier Grade NAT that adds an extra layer of network translation you cannot control. In this case, contact your ISP and ask whether they use Carrier Grade NAT — if they do, there is no way to open your NAT type without changing providers.

Another possibility is that your router itself does not support the features you need. Very old routers or routers provided by your ISP may have limited options. If you own your router, you can try updating its firmware through the manufacturer's website or app — this sometimes adds missing features. If the router is provided by your ISP, you may need to request a newer model.

In the meantime, a Moderate NAT type is still playable for most games. You may experience slightly longer wait times to find matches or occasional lag spikes, but you should still be able to play online.

Security considerations when opening ports

Opening port 3074 for Xbox does not create a meaningful security risk. This port is designed specifically for game traffic, and your router's firewall still protects everything else on your network. You are not opening your computer or personal files to the internet — you are straightforward telling your router to route a specific type of traffic to a specific device.

The real security risk comes from opening ports you do not need or forwarding them to the wrong device. Stick to port 3074 for Xbox, and do not forward ports to your computer unless you have a specific reason and understand what you are doing. If you ever sell or give away your Xbox, go back into your router settings and delete the port forwarding rule so the port is no longer open.

Frequently Asked Questions

Can I change NAT type on the Xbox itself without touching my router?

No. NAT type is entirely controlled by your router, not your console. The Xbox has no setting to change it. You must log into your router's settings through a web browser or app to make any changes.

Will changing NAT type make my network less find?

Opening port 3074 for Xbox does not significantly reduce security. Your router's firewall still blocks unwanted traffic, and this port is specifically designed for game data. The risk is very low if you only open the port Xbox needs.

What is the difference between my Xbox's local IP and my public IP?

Your local IP (like 192.168.1.50) is your Xbox's address on your home network only. Your public IP is the address your internet service provider assigns to your entire home network, and it is what the internet sees. You need the local IP for port forwarding, not the public one.

Do I need to do anything else after port forwarding is set up?

No. Once port forwarding is configured, it stays active automatically. You do not need to turn it on or off, and you do not need to reconfigure it unless you change routers or reset your router to factory settings.

Why does my NAT type sometimes change back to Moderate?

If your Xbox's local IP address changes, port forwarding may stop working because it is pointing to the wrong address. To prevent this, you can set a static local IP for your Xbox in your router's DHCP settings, which keeps the same address assigned to it permanently.