Why you might want to change your IP address
Your IP address is how your computer identifies itself on a network — it's the digital equivalent of a mailing address. In Windows 11, you have two types: a local IP address (the one your router assigns to your computer at home) and a public IP address (what websites see when you connect). Most people change their local IP address to fix network conflicts, organize their devices, or make remote access more predictable. Changing your public IP is a different task entirely and usually requires contacting your internet provider or using a VPN.
This guide covers changing your local IP address — the one your home network uses. This is something you can do yourself in Windows 11 settings without calling anyone.
Key Takeaways
- Windows 11 lets you change your local IP address through Settings > Network & Internet > Advanced Network Settings, or by configuring your router instead.
- Most home networks use DHCP, which means your router assigns IP addresses automatically — changing it in Windows alone may not stick unless you also change router settings.
- Changing your IP address can break remote access, printer connections, and port forwarding until you update those settings to match the new address.
- If you want a permanent fixed IP on your home network, configuring it in your router's admin panel is more reliable than setting it in Windows alone.
Changing your IP address directly in Windows 11
Open Settings and go to Network & Internet. Select Advanced Network Settings, then find the network you're connected to and click it. Choose Edit next to "IP assignment." Toggle the switch from Automatic (DHCP) to Manual, then select IPv4.
In the IP address field, enter a new address in the same range as your router. If your router uses 192.168.1.x (which most home routers do), pick something like 192.168.1.50 or 192.168.1.100. Leave the Subnet mask as 255.255.255.0 unless your network is set up differently. For the Gateway, enter your router's IP address — usually 192.168.1.1. For DNS servers, you can use your router's address again, or use public DNS like 8.8.8.8 and 8.8.4.4 (Google's servers). Click Save.
Windows will explore the change when ready. Your computer will disconnect and reconnect to the network with the new address. If you can't reach the internet or other devices after this, you may have entered an address that conflicts with another device, or your router is overriding the change.
Why the change might not stick — and what to do about it
Most home routers use DHCP, a system that automatically assigns IP addresses to every device that connects. Even if you set a fixed IP in Windows, your router may reassign a different one the next time your computer restarts or reconnects. This is especially common if you set the address outside the range your router is configured to hand out.
To make the change permanent, you have two options. The first is to configure a DHCP reservation in your router's admin panel. This tells the router "whenever this specific computer connects, always give it this specific IP address." The second is to disable DHCP for that device entirely and use a static IP — but this only works if you're comfortable with router configuration and won't move the device to a different network.
To set up a DHCP reservation, log into your router's admin panel (usually by typing 192.168.1.1 into a browser, though some routers use a different address — check your router's manual or the sticker on the back). Look for a section called DHCP, Reservations, or Address Reservation. You'll need your computer's MAC address, which you can find in Windows by opening Command Prompt and typing ipconfig /all — look for "Physical Address" next to your network adapter. Enter that MAC address and the IP you want to reserve, then save.
What breaks when you change your IP address
Changing your IP address can interrupt services that depend on knowing where your computer is. If you've set up port forwarding on your router to reach your computer remotely, that rule will still point to the old IP. If you've told a printer to print to a specific IP address, it won't find your computer. If you use remote desktop or SSH to access your computer from outside your home network, the connection will fail until you update the forwarding rule.
Before you change your IP, write down what services or devices are configured to reach your computer at its current address. After the change, update those settings. For port forwarding, log back into your router and change the destination IP to the new one. For printers and other devices, you may need to re-add your computer or update its address in the device's settings.
Changing your public IP address
Your public IP address — the one websites see — is assigned by your internet service provider. You cannot change it directly in Windows. If you want a different public IP, you have a few options. The simplest is to restart your modem and router; many ISPs will assign a new public IP after a restart, though this is not may provide and may take a few minutes. Unplug both devices for 30 seconds, plug in the modem first, wait for it to fully restart (usually 2 to 3 minutes), then plug in the router.
If you need to hide or change your public IP for privacy reasons, use a VPN (virtual private network). A VPN routes your traffic through a server in another location, so websites see the VPN's IP instead of yours. This is different from changing your actual public IP — your ISP still sees the same address, but the outside world does not. VPNs are a privacy tool, not a way to get a new public IP from your ISP.
If you need a permanent static public IP (for example, to run a server from home), contact your ISP. Some plans include a static IP for an additional monthly fee; others do not offer it at all.
Checking your IP address after the change
To confirm your local IP address changed, open Command Prompt and type ipconfig. Look for "IPv4 Address" under your network adapter — it should show the new address you set. If it still shows the old one, the change did not explore. This usually means your router is overriding it with DHCP, or you entered an invalid address.
To check your public IP address, open a browser and search "what is my IP" or visit a site like whatismyipaddress.com. This shows the address your ISP assigned, not the local address you just changed. Your public IP should not have changed unless you restarted your modem.
When to use a static IP versus DHCP
For most home networks, DHCP is simpler and works fine. Your router handles everything, and you don't have to think about conflicts. Use a static IP (set in Windows or reserved in your router) only if you need your computer's address to stay the same for a specific reason — running a home server, setting up port forwarding, or connecting a device that needs a predictable address.
If you do use static IPs, pick addresses outside the range your router hands out automatically. Most routers use 192.168.1.100 to 192.168.1.254 for DHCP, so set static IPs in the 192.168.1.2 to 192.168.1.99 range. This prevents your router from accidentally assigning the same address to two devices, which will break both connections.
Frequently Asked Questions
Will changing my IP address affect my internet speed?
No. Your IP address is just a label — it does not affect how fast data moves through your network or to the internet. If your speed changes after you set a new IP, something else went wrong, like a misconfigured gateway or DNS server.
Can I use any IP address I want?
No. Your address must be in the same range as your router and must not conflict with another device on the network. If you pick an address already in use, both devices will have connection problems. Stick to the private ranges: 192.168.1.x, 10.0.0.x, or 172.16.x.x.
What happens if I set the wrong gateway or DNS?
If you enter the wrong gateway (usually your router's IP), your computer won't be able to reach other networks or the internet. If you enter the wrong DNS, websites won't load even though your connection works. You can fix this by going back to Settings and either re-entering the correct values or switching back to Automatic (DHCP).
Do I need to restart my computer after changing my IP?
No. Windows applies the change when ready. Your network connection will drop and reconnect within a few seconds. If it doesn't reconnect, the address you entered is invalid or conflicts with another device.
Is it better to set a static IP in Windows or in my router?
Setting it in your router (via DHCP reservation) is more reliable. Your router controls the network, so it will enforce the reservation even if your computer restarts or you move it to a different network temporarily. Setting it only in Windows works, but the router can override it if DHCP is still enabled.