What changing your internet address means and why you might do it

Your internet address — technically called an IP address — is a number that identifies your device on the network, like a mailing address for data. When you change it, you are telling your router to assign a different number to your device or to your whole home network. Most people never need to do this. But if you are troubleshooting a connection problem, hiding your network from casual scanning, or setting up a device that needs a fixed address, changing your IP address is straightforward.

There are two different things you might want to change: the address your internet provider assigns to your home (called your public IP address), or the address your router assigns to a single device inside your home (called a private IP address). The steps are different, and which one you need depends on what problem you are trying to solve.

Key Takeaways

  • Your public IP address (the one your internet provider assigns) changes automatically when you restart your modem, and you cannot force a specific number — the provider chooses it.
  • Your private IP address (the one your router assigns to each device) can be changed in your router settings, and this is what most people mean when they say they want to change their IP address.
  • Restarting your modem is the fastest way to get a new public IP address if you need one for security or troubleshooting reasons.
  • Assigning a fixed private IP address to a device prevents connection problems when that device needs to stay at the same address — useful for printers, security cameras, or game consoles.

Getting a new public IP address from your internet provider

Your internet provider assigns your home a public IP address — the number that identifies your whole network to the outside world. You cannot choose this number, and you cannot force the provider to give you a specific one. But you can trigger a new assignment by restarting your modem.

Unplug the modem from power for 30 seconds, then plug it back in. Wait two to three minutes for it to fully restart and reconnect to your provider. Your public IP address will almost certainly be different. This works because your provider's system treats a disconnected modem as a new customer requesting an address, so it hands out a fresh one from its pool.

If you restart the modem and the address does not change after several minutes, wait a few hours and try again. Some providers hold the same address for a period of time to reduce churn. If you need a different address for security reasons — for example, because a website has blocked your current one — restarting once or twice usually solves it within a day.

Changing your private IP address in router settings

The private IP address is the number your router assigns to each device on your home network. This is what you change when you want a specific device to have a fixed address, or when you are troubleshooting a conflict between two devices.

Log into your router by opening a web browser and typing the router's address — usually 192.168.1.1 or 192.168.0.1, or sometimes printed on a sticker on the router itself. Enter your router's username and password (the default is often admin and admin, or admin and the router's serial number, but check your manual if those do not work).

Once you are logged in, look for a section called DHCP, Local Network, LAN Settings, or Connected Devices. The exact name varies by router brand. Find the device you want to change — it will be listed by name or by its MAC address (a unique identifier printed on the device or visible in your router's settings). Some routers let you change the address directly from this list; others require you to go into that device's individual settings and assign a static IP address there.

If you are assigning a static address, choose a number in the range your router uses but outside the range it automatically assigns. If your router's range is 192.168.1.100 to 192.168.1.254, pick something like 192.168.1.50 or 192.168.1.99. Save the change and restart the device. It should reconnect with the new address.

When to assign a fixed private IP address to a device

Most devices work fine with an address that changes occasionally. But some devices need to stay at the same address so other devices can find them reliably. A printer, security camera, or game console that other devices connect to should have a fixed address.

If you do not assign a fixed address and your router restarts, that device might get a different number. Other devices will not be able to find it at the old address, and you will have to reconfigure them. Assigning a fixed address prevents this problem.

To assign a fixed address, log into your router and find the device in the connected devices list. Look for an option to reserve the address, set static IP, or assign fixed IP. The router will keep that device at that address even after restarts. Write down the address you chose so you have it if you need to reconfigure the device later.

Troubleshooting when the address does not change

If you restart your modem and your public IP address does not change, wait a few hours. Some providers hold addresses for 24 hours or longer before reassigning them. If it has been more than a day, restart the modem again.

If you are trying to change a private IP address in your router and the device keeps getting a different address than the one you set, the device itself may be overriding your choice. Some devices request a specific address from the router instead of accepting what the router assigns. Check the device's network settings to see if it has a static IP setting turned on. If it does, either turn it off (so the router controls the address) or set it to match what you configured in the router.

If you cannot log into your router to change settings, you may have forgotten the password. Most routers have a reset button that erases all settings and returns the password to the factory default. Pressing it will also reset your private IP addresses, so use this only as a last resort.

Understanding DHCP and why addresses change

DHCP is the system your router uses to automatically assign addresses to devices. When a device connects, it asks the router for an address, and the router hands out one from its pool. Each address comes with a lease — a time limit, usually 24 hours. When the lease expires, the device asks for a new one, and the router usually gives it the same address back (if it is still available) or a different one.

This automatic system is why most people never think about IP addresses. But it also means addresses can change without warning if a device is offline for a while, or if the router restarts. If you need a device to stay at the same address, you bypass DHCP by assigning a static address instead. The router will not reassign it, and the device will not ask for a new one.

Frequently Asked Questions

Will changing my IP address affect my internet speed?

No. Your IP address is just a label — changing it does not change how fast data moves through your connection. If you are changing your address to fix a speed problem, the real issue is something else, and the address change probably will not help.

Do I need to change my IP address for security?

Changing your public IP address occasionally is a reasonable security habit, but it is not critical. Restarting your modem every few months is enough for most people. Changing your private IP addresses inside your home does not improve security — your router's firewall protects you regardless of what addresses your devices use.

What if two devices end up with the same IP address?

This causes a conflict, and usually one or both devices will lose internet connection. If this happens, log into your router and check the connected devices list. Find the device with the duplicate address and either let the router reassign it automatically (by restarting the device) or manually assign it a different static address.

Can I choose my public IP address?

No. Your internet provider assigns public IP addresses from its own pool, and you cannot request a specific number. You can only trigger a new assignment by restarting your modem. If you need a specific public address for business reasons, contact your provider about a static IP service — this is usually a paid add-on.

Will changing my IP address disconnect me from the internet?

Restarting your modem to change your public IP will briefly disconnect you — usually for two to three minutes while the modem restarts. Changing a private IP address in your router settings will disconnect only that one device, and only briefly while it reconnects with the new address.