What a NAS is and why you might want one
A NAS (network-attached storage) is a box that sits on your home network and stores files the way a cloud service does — except you own the hardware and the data stays in your house. Instead of paying a monthly subscription to keep photos or documents on someone else's server, you buy the device once, plug it into your router, and access your files from any computer or phone on your network.
The main reason to build one is control. You decide how many copies of each file exist, where they live, and who can see them. A NAS also works without internet — your devices can still reach your files if your connection goes down. For people storing years of photos, video projects, or work files, a NAS costs less over time than paying a cloud service month after month.
The trade-off is that you manage it yourself. That means choosing hardware, installing drives, setting up the software, and handling backups. If something breaks, you fix it or pay someone to. This guide walks through each step so you understand what you are choosing and why.
Key Takeaways
- A NAS is a dedicated storage device that connects to your router and lets all your devices access files without uploading to the cloud.
- You choose between pre-built NAS boxes (easier, more expensive) and building your own from a PC or small computer (cheaper, more work).
- The two main software options are Synology (for their hardware), TrueNAS (free, works on many systems), and Unraid (paid, good for mixed storage).
- You need at least two drives in a RAID configuration so that if one drive fails, your files are not lost.
- A NAS needs a static IP address on your network so your devices always know where to find it.
Pre-built NAS boxes versus building your own
The easiest path is buying a pre-built NAS from Synology, QNAP, or Asustor. These come as sealed boxes with the software already installed. You unbox it, plug in drives, connect it to your router, and start using it. Synology is the most common choice for home users because their interface is straightforward and they support their hardware for years. A two-bay Synology (holds two drives) costs between $150 and $300 depending on the model.
Building your own means buying a small computer — often a used mini PC, a Raspberry Pi, or an old laptop — and installing free software like TrueNAS or Unraid on it. This costs less upfront if you already have a spare computer lying around, but it requires more technical work. You are responsible for the operating system, updates, and troubleshooting. This path makes sense if you are comfortable with Linux or if you want to repurpose old hardware.
A middle ground is buying a NAS case and motherboard separately, then assembling them yourself. This gives you more control over the hardware than a pre-built box but less work than starting from a bare computer. Cases designed for NAS (like those from Fractal Design or Silverstone) cost $100 to $300 and come with space for four to eight drives.
Choosing drives and understanding RAID
RAID is a way of arranging multiple drives so that if one fails, your data survives. The most common setup for home NAS is RAID 1, which mirrors two drives — every file is written to both drives at once. If one drive dies, the other still has a complete copy. You can pull out the dead drive, put in a new one, and the NAS rebuilds the copy automatically.
For a two-bay NAS, use RAID 1. For four or more bays, RAID 6 is safer — it can survive two drive failures at once. The trade-off is that RAID 6 uses more space (with four drives, you lose two drives' worth of capacity) but protects you better.
Buy drives designed for NAS, not desktop drives. NAS drives (like Western Digital Red, Seagate IronWolf, or Synology-branded drives) are built to run 24/7 and cost a bit more, but they last longer in a NAS environment. A 4TB NAS drive costs around $80 to $120. If you are building a two-bay NAS with RAID 1, buy two identical drives of the same size and model.
Do not mix old and new drives in the same RAID array. Older drives are more likely to fail, and if one fails while the array is rebuilding from another failure, you lose everything. If you are upgrading, replace all drives at once or wait until you have a complete matching set.
Software options and what they do
Synology DSM (DiskStation Manager) is the software that runs on Synology hardware. It includes a web interface for managing files, automatic backups, photo organization, and media serving. You access it by typing your NAS's IP address into a web browser. Synology also makes a mobile app so you can see your files from your phone. The software is free with the hardware and updates automatically.
TrueNAS is free software you install on your own computer or small PC. It is more powerful than Synology DSM but has a steeper learning curve — you configure things through a web interface, but some settings require understanding Linux concepts. TrueNAS is good if you want full control or if you are using older or mixed hardware. It works on Intel or AMD processors and does not require specific hardware.
Unraid costs $60 one-time or $120 for lifetime updates. It lets you mix drives of different sizes and add storage without rebuilding your entire array. This flexibility appeals to people who upgrade gradually or want to experiment. Unraid also has a strong community and lots of plugins for running other software (like media servers) on the same box.
For most people starting out, Synology hardware with DSM is the simplest choice. If you are comfortable with Linux or want to use existing hardware, TrueNAS is the free alternative. Unraid sits in the middle — not as straightforward as Synology, but more flexible than TrueNAS.
Setting up your NAS on your network
Once your NAS is powered on and connected to your router with an ethernet cable, it needs an IP address so your devices can find it. Most NAS software can get an address automatically from your router using DHCP. Open your router's admin page (usually 192.168.1.1 or 192.168.0.1) and look for the list of connected devices — your NAS will appear there with an IP address like 192.168.1.100.
Next, assign that NAS a static IP address so it does not change. In your router's settings, find the DHCP or IP reservation section and tell the router to always give your NAS the same address. This way, when you type that address into your browser tomorrow or next month, you reach the same device. Without a static IP, your NAS might get a different address and you will not be able to find it.
Connect to your NAS by typing its IP address into a web browser on any computer on your network. You will see a login screen. Create a strong password — this is the key to all your files. After logging in, you can create user accounts for other people in your household, set up shared folders, and configure backups.
For security, change the default username and password when ready, disable remote access unless you specifically need it, and keep the NAS software updated. Updates usually install automatically, but check the settings to confirm.
Backing up your NAS and protecting your data
A NAS with RAID protects you from a single drive failure, but it does not protect you from theft, fire, or accidental deletion. You need a backup — a copy of your files stored somewhere else. The most common approach is to back up your NAS to an external USB drive that you keep in a different location, or to a second NAS in another room.
Most NAS software includes built-in backup tools. Synology has Hyper Backup, which can copy your files to an external drive on a schedule (for example, every Sunday night). TrueNAS has similar tools. Set a backup to run automatically so you do not have to remember to do it manually. Test the backup by actually restoring a file from it — do not assume it works until you have tried it.
For important files, consider a three-copy rule: one copy on your NAS, one on an external drive at home, and one off-site (either a cloud service or a drive at a friend's house). This protects you if your house burns down or your NAS is stolen.
Common mistakes to avoid when building a NAS
Using desktop drives instead of NAS drives is the most common mistake. Desktop drives are not designed to run continuously, and they fail faster in a NAS. The extra cost of NAS drives is worth it.
Building a single-drive NAS is another trap. If that one drive fails, all your files are gone. Always use at least two drives in RAID 1. The cost of a second drive is far less than recovering lost data or rebuilding your photo library.
Ignoring updates is risky. NAS software updates include security patches that close vulnerabilities. Enable automatic updates or check for them monthly. The same goes for the drives themselves — some NAS software can update drive firmware, which improves reliability.
Putting your NAS in a hot, dusty place shortens its life. Keep it in a cool, dry spot with good airflow. Avoid putting it in a closet or under a desk where air cannot circulate. A NAS running hot will fail sooner.
Sizing your NAS for your actual needs
Start by estimating how much storage you actually need. A year of photos from a smartphone is roughly 50 to 100 GB. A year of 4K video is several terabytes. Documents and music take very little space. Add up what you have now, then add 50 percent for growth over the next few years.
If you need 2 TB of usable storage with RAID 1, buy a two-bay NAS and two 2 TB drives (you get 2 TB usable, the other 2 TB is the mirror). If you need 4 TB usable, buy two 4 TB drives. If you need 6 TB or more, consider a four-bay NAS with RAID 6, which gives you more room to grow and better protection.
Do not buy more than you need right now. Storage is cheap, and you can always add drives or upgrade later. A two-bay NAS can often be upgraded to four bays if you buy a larger case, or you can buy a second NAS for backups.
Frequently Asked Questions
Can I access my NAS files from outside my home network?
Yes, but it requires extra setup. Most NAS software can create a find tunnel so you reach your files over the internet. Synology calls this QuickConnect, TrueNAS uses WireGuard. You enable it in the settings, then use an app or web address to connect from anywhere. This adds a small security risk, so only enable it if you actually need remote access, and use a strong password.
What happens if a drive fails in my RAID 1 array?
Your NAS keeps running on the remaining drive. You will see an alert in the software telling you a drive failed. You power off the NAS, pull out the dead drive, insert a new one, power back on, and the NAS rebuilds the mirror automatically. This takes a few hours depending on drive size. During rebuilding, your files are still accessible, but the NAS is slower.
Do I need a UPS (uninterruptible power supply) for my NAS?
A UPS is not required but is a good idea. It keeps your NAS running for a few minutes if the power cuts out, so the NAS can shut down cleanly instead of losing data mid-write. A small UPS costs $50 to $150 and can power a NAS for 10 to 30 minutes depending on the model.
Can I run other software on my NAS besides file storage?
Synology and Unraid both support apps — you can run a media server, a security camera system, or other tools on the same hardware. TrueNAS is more limited for this. If running multiple services is important to you, Unraid is the most flexible option.
How often should I replace the drives in my NAS?
NAS drives typically last five to eight years. Most people replace them when one fails, or proactively every five years if they hold critical data. Watch the NAS software for SMART warnings — these predict drive failure and give you time to replace the drive before it dies.