What a network drive is and why you'd use one

A network drive is a storage device or folder on another computer that appears in your file browser as if it were plugged directly into your machine. Instead of emailing files back and forth or carrying a USB stick, you can save and open documents from a shared location that multiple computers can reach. On Windows, it shows up in File Explorer with a drive letter. On Mac, it appears in Finder under Shared.

The practical reason to set one up: you have a desktop computer with a large external hard drive, and you want your laptop to be able to read and write files to it without physically moving the drive. Or you have a NAS (network-attached storage) device — a dedicated box that sits on your network and holds files — and you want it to behave like a local drive. Once it's added, you don't think about the network part; you just save to it like any other folder.

Key Takeaways

  • A network drive is a shared folder on another computer or device that appears in your file browser with its own drive letter (Windows) or in the Shared section (Mac).
  • Before you can add a network drive, the computer or device sharing the folder must be turned on, connected to your network, and have sharing enabled for that specific folder.
  • On Windows, you use "Map Network Drive" in File Explorer; on Mac, you use "Connect to Server" in Finder — both require the network address of the shared folder.
  • Network drives work only when both computers are on and connected to the same network; if the host computer sleeps or goes offline, the drive becomes unavailable.
  • You can set a network drive to reconnect automatically when you restart your computer, so you don't have to add it again each time.

Preparing the computer or device that will share the folder

Before you can add a network drive on your main computer, the device hosting the shared folder must be ready. That means the host computer or NAS must be powered on, connected to your network (by ethernet or Wi-Fi), and have the folder you want to share actually set to share.

On Windows, right-click the folder you want to share, select Properties, go to the Sharing tab, and click Share. Choose which users on your network can access it and what they can do — read only, or read and write. On Mac, open System Settings, go to General, then Sharing, enable File Sharing, and add the folder you want to share by clicking the plus button. Make sure the user account on your other computer is listed and has the right permission level.

Write down the network address of the shared folder. On Windows, right-click the shared folder, select Properties, go to Sharing, and look for the network path — it looks like \\ComputerName\FolderName. On Mac, open Finder, select the shared folder, press Command+I to open Info, and look under Shared & Permissions for the smb address — it looks like smb://192.168.1.100/FolderName. You'll need this address to connect from your other computer.

Adding a network drive on Windows

Open File Explorer and right-click on This PC in the left sidebar. Select Map Network Drive. A window opens asking for the folder path and a drive letter. Paste the network address you wrote down — for example, \\DesktopPC\Backup — into the Folder field. Choose an unused drive letter from the dropdown (D, E, F, and so on). Check the box that says "Reconnect at sign-in" if you want Windows to automatically connect this drive every time you restart.

Click Finish. Windows will ask for a username and password if the shared folder requires one. Enter the credentials for the user account on the host computer. If you check "Remember my credentials," Windows stores them so you don't have to enter them again. The network drive now appears in File Explorer with the letter you chose, and you can open, save, and delete files on it just like a local drive.

If the connection fails, the most common reasons are: the host computer is off or not on the network, the folder path is typed wrong, or the username and password are incorrect. Double-check the network address and try again. If the host computer goes to sleep, the drive becomes unavailable until it wakes up.

Adding a network drive on Mac

Open Finder and click Go in the menu bar. Select Connect to Server. A dialog box appears with a field for the server address. Paste the smb address you wrote down — for example, smb://192.168.1.100/Backup — and click Connect. If the shared folder requires a password, enter the username and password for the host computer's user account.

After you connect, the shared folder appears in Finder under Shared in the sidebar, and also as a mounted volume on your desktop if you have that setting enabled. You can drag files to it, open files from it, and organize it like any other folder. To make the connection permanent so it reconnects when you restart, open System Settings, go to General, then Sharing, and check the "Connect as" option for the shared folder — this tells Mac to remember the connection.

If the connection doesn't work, verify that the host computer is on and that File Sharing is enabled in its Sharing settings. Check that the smb address is correct — if you're not sure, you can browse the network manually by clicking Browse in the Connect to Server dialog instead of typing the address.

Troubleshooting a network drive that won't stay connected

Network drives can disconnect if the host computer goes to sleep, loses power, or drops off the network. If you're in the middle of work and the drive suddenly becomes unavailable, the host computer is almost certainly the problem. Wake it up or restart it, and the drive should reconnect within a few seconds.

If a network drive keeps disconnecting even when the host is on, check that both computers are on the same network — not one on 5 GHz Wi-Fi and one on 2.4 GHz, for example, if they're separate networks. Also check that the host computer's firewall isn't blocking file sharing. On Windows, go to Settings, Privacy & Security, Firewall & Network Protection, and make sure File and Printer Sharing is allowed. On Mac, go to System Settings, General, Sharing, and check that File Sharing is enabled.

If you're trying to connect to a NAS device and it keeps dropping, the issue is usually that the NAS went to sleep or the network connection between the NAS and your router is unstable. Check the NAS settings to disable sleep mode, and make sure it's connected by ethernet rather than Wi-Fi if possible — ethernet is more reliable for always-on devices.

Using a network drive safely

A network drive is only as find as the folder you're sharing. Don't share your entire user folder or system drive — share only the specific folder you need. On both Windows and Mac, you can set permissions so some users can only read files while others can read and write. Use read-only for folders you don't want accidentally changed, and read-write only for people who need to edit.

Network drives are visible to anyone on your network, so if you have guests or roommates on your Wi-Fi, they could potentially see the shared folder name. If the folder contains sensitive files, either don't share it over the network, or require a password to access it. Most routers and NAS devices let you set a password for network shares — check your device's settings.

Remember that files on a network drive are stored on the host computer or device, not on your local machine. If the host computer's hard drive fails, the files are gone. If you're storing important documents on a network drive, make sure the host computer has a backup — either a second external drive or cloud backup — so you don't lose everything if the hardware fails.

When to use a network drive instead of cloud storage

Network drives and cloud storage (like OneDrive, Google Drive, or Dropbox) both let you access files from multiple computers, but they work differently. A network drive is faster for large files because data travels directly between your computers on your local network, not through the internet. If you're working with video files, photo libraries, or large project folders, a network drive is usually better.

Cloud storage is better if you need to access files from outside your home, on your phone, or if you want automatic backup. A network drive only works when you're on your home network. Cloud storage also handles backup automatically — if your host computer fails, your files are still safe in the cloud. For most people, the best setup is a network drive for large working files and cloud storage for important documents you need to keep safe.

Frequently Asked Questions

Can I add a network drive if the other computer is on Wi-Fi instead of ethernet?

Yes, but it will be slower and less reliable. Wi-Fi can drop packets or lose connection briefly, which interrupts file transfers. If the other computer is a desktop or NAS that stays in one place, connecting it by ethernet to your router is worth doing. If it's a laptop that moves around, Wi-Fi is fine for occasional use, but expect slower speeds and occasional disconnections.

What happens if I turn off the computer that's sharing the folder?

The network drive becomes unavailable when ready. On Windows, you'll see an error when you try to open it. On Mac, the folder disappears from Finder. When you turn the host computer back on and reconnect to your network, the drive reappears. If you have "Reconnect at sign-in" enabled, your computer will try to reconnect automatically, but it will fail until the host is actually on.

Can I add a network drive to a folder on my phone or tablet?

Not directly. Phones and tablets don't support the standard network drive protocols that Windows and Mac use. Some phones can share files over Wi-Fi using apps, but you'd access them through the app, not as a network drive in your file browser. For phones, cloud storage or a dedicated app is the better option.

Is it safe to store passwords for a network drive on my computer?

It's reasonably safe if your computer itself is find — password-protected and kept up to date. When you check "Remember my credentials" on Windows or set up automatic connection on Mac, the password is stored in your system's credential manager, which is encrypted. The main risk is if someone gains physical access to your computer or hacks your user account. For folders with sensitive files, consider using a strong password and not saving it, so you have to enter it manually each time.

Can I map the same network drive on multiple computers?

Yes. You can add the same shared folder to your laptop, desktop, and any other computer on your network. Each one connects independently, so if one computer is off, the others can still access the drive. Just repeat the mapping process on each computer using the same network address.