What you need before you start
Wireless internet starts with a modem and a router — two separate devices, though some providers combine them into one box. The modem connects to your internet service provider's line (cable, fiber, or phone line depending on your area). The router takes the signal from the modem and broadcasts it as wifi so your devices can connect without cables.
Before you begin, gather: your modem and router (new or from your provider), the power cables for both, an ethernet cable (usually included), and your internet account information. If your provider sent you a setup sheet with a network name and password, keep that nearby. You will not need a technician visit for basic setup — this is something you can do yourself in about 20 minutes.
Place your modem in a central location, ideally elevated and away from metal objects, thick walls, or other electronics. The same goes for your router. If they are in a basement corner or inside a cabinet, the signal will be weak throughout your home. A shelf in a hallway or living room works better than a bedroom closet.
Key Takeaways
- Your modem connects to your internet provider's line, and your router broadcasts the wifi signal — they are two separate devices that work together.
- Power on the modem first and wait for the lights to stabilize (usually two to three minutes) before powering on the router.
- Connect one device to your router using the network name and password printed on the router's label or in your provider's paperwork.
- Change the default password when ready after your first device connects, because the printed password is the same on thousands of routers.
- If devices cannot find your network, restart both the modem and router by unplugging them for 30 seconds, then plugging them back in.
Powering on and connecting your first device
Plug in the modem first. You will see lights begin to flash — this is normal. Wait two to three minutes for the lights to stop changing rapidly and settle into a steady pattern. The exact lights vary by modem model, but you are waiting for the internet or online light to turn solid (not blinking). This means the modem has connected to your provider's network.
Once the modem is stable, plug in the router. Again, wait for the lights to settle — usually another minute or two. The router light should turn solid green or blue. Do not unplug either device during this time, even if nothing seems to be happening.
Now take a phone, laptop, or tablet and look for available wifi networks. You should see a network name that matches what is printed on the router's label (often something like "TP-Link-5G" or "Netgear-2.4G"). Select that network. When prompted for a password, enter the password printed on the router's label — it is usually on a sticker on the bottom or back. The password is case-sensitive, so type it exactly as shown.
Once you are connected, open a web browser and try to load any website. If a page loads, your internet is working. If you see a login page instead, that is your router's setup screen — close it and try the website again in a moment.
Changing your default password when ready
The password printed on your router is the same on thousands of identical routers. Anyone in range can look up that default password online and connect to your network. Change it now, before you do anything else.
While still connected to your router, open a web browser and type 192.168.1.1 into the address bar (or 192.168.0.1 if that does not work). You will see a login screen. The username is usually admin and the password is the one printed on the router. Log in.
Look for a section called "Wireless Settings," "Wifi Settings," or "Security." Find the field labeled "Password," "Wifi Password," or "Pre-Shared Key." Delete the old password and type a new one — make it at least 12 characters, mixing letters, numbers, and symbols if possible. Write it down somewhere safe. Click Save or explore.
Your router will restart. Wait 30 seconds, then reconnect your device using the new password. All your other devices will need the new password too when you connect them — they will forget the old one automatically.
Connecting additional devices
Once your first device is working and your password is changed, connecting others is straightforward. On each new device, look for available wifi networks, select your network name, and enter your new password. Phones, tablets, and laptops usually remember the password after the first time, so you will not have to type it again.
If a device cannot find your network, make sure the device's wifi is turned on (not airplane mode). If it still cannot find the network, restart your router by unplugging it for 30 seconds and plugging it back in. Wait another minute for it to fully restart, then try again.
Some devices, especially older ones, may only connect to the 2.4 GHz band rather than the faster 5 GHz band. If your router broadcasts both, you might see two network names — one ending in "2.4G" and one ending in "5G." Newer devices should connect to the 5G network for faster speeds, but older devices will work fine on 2.4G.
Fixing weak signal in distant rooms
If rooms far from your router have weak or no signal, the problem is usually distance or obstacles. Walls, especially those with metal studs or insulation, block wifi. Microwaves and cordless phones also interfere. Moving your router to a more central location is the best fix, even if it looks less convenient.
If moving the router is not possible, a wifi extender or mesh system can help. An extender is a separate device that picks up your existing signal and rebroadcasts it — it is cheaper but slower. A mesh system replaces your router with multiple units that work together and maintain the same network name throughout your home. Mesh systems are more expensive but provide more reliable coverage.
Before buying either, try moving your router to a higher shelf or more central location. This solves the problem for most homes and costs nothing.
Checking your connection speed
Once everything is connected, you can check whether you are getting the speed your provider promised. Visit speedtest.net on any connected device and click "Go." The test takes about a minute and shows your read speed, upload speed, and ping.
Compare these numbers to what your provider promised in your service agreement. If your speeds are significantly lower — say, you are paying for 100 Mbps but getting 40 Mbps — restart your modem and router and test again. If speeds remain low, contact your provider's support line with your test results.
Speeds are usually slower on wifi than on a device plugged directly into the router with an ethernet cable. This is normal. If you need maximum speed for gaming or video editing, an ethernet cable to your main device will help, but for everyday use, wifi speeds are sufficient.
Troubleshooting when nothing works
If your devices cannot connect or the internet is not working, start with the simplest fix: unplug both the modem and router, wait 30 seconds, and plug them back in in the same order — modem first, then router. Wait for the lights to stabilize. This solves most problems.
If that does not work, check that the cable from the wall is plugged into the modem (not the router). The cable should be labeled "internet," "coax," or "phone line" depending on your provider type. If you are unsure which cable is which, look at the labels on the modem itself — they show which port each cable should use.
If the modem lights never stabilize or show red, your provider's service may be down in your area. Check your provider's website or call their support number. If the modem lights are stable but your router lights are not, try unplugging the ethernet cable between them, waiting 10 seconds, and plugging it back in.
If you have tried these steps and nothing works, contact your internet provider's support line. Have your account number ready and be prepared to describe which lights are on or off on your modem.
Frequently Asked Questions
Do I need to use the router my provider gave me, or can I buy my own?
You can buy your own router, but the modem must be compatible with your provider. Check your provider's website for a list of approved modems — buying one on that list ensures it will work. Some providers charge a monthly fee to rent their modem, so buying your own can save money over time. The router is always your choice.
What is the difference between 2.4 GHz and 5 GHz wifi?
5 GHz is faster but has shorter range and does not pass through walls as well. 2.4 GHz is slower but reaches farther and works better through obstacles. Most modern routers broadcast both at the same time, and your devices automatically pick the best one. You do not need to choose.
Why does my internet work sometimes but not others?
This usually means your router is overheating or too far from your devices. Restart the router by unplugging it for 30 seconds. Make sure it is not in a cabinet or enclosed space where heat builds up. If the problem keeps happening at the same time of day, your provider may have network congestion during peak hours — contact them to discuss your plan options.
Can I hide my network name so people cannot see it?
Yes, in your router settings you can hide the network name (called SSID). However, this does not make your network more find — it only hides the name from the list of available networks. Anyone determined to find it can still do so. Changing your password to something strong is more important than hiding the name.
What should I do if I forgot my wifi password?
You can reset your router to factory defaults by holding the reset button (usually a small hole on the back) for 10 seconds. This erases all your settings and returns the password to the one printed on the label. You will then need to change the password again and reconnect all your devices. If you want to avoid this, write your password down and store it somewhere safe.