Why you might want to disable IPv6

IPv6 is the newer internet protocol that your device uses to connect online, but it can create security gaps if your router or software doesn't handle it well. Disabling it removes one potential attack surface and can solve connection problems on networks where IPv6 causes conflicts with older equipment. Most home networks run fine on IPv4 alone — the older protocol that still handles the vast majority of household traffic.

You'll want to disable IPv6 if your router firmware is outdated and doesn't patch IPv6 vulnerabilities, if you're experiencing intermittent disconnections that correlate with IPv6 traffic, or if you're running older network equipment that doesn't support it properly. Disabling it is straightforward and won't break your internet — you'll still connect normally through IPv4.

Key Takeaways

  • IPv6 disabling happens in two places: your device's network settings and your router's admin panel, and you need to do both for it to take full effect.
  • On Windows, you disable IPv6 through Network Settings or the Registry; on Mac and Linux, it's a single command in Terminal that takes effect when ready.
  • In your router's admin panel (usually accessed at 192.168.1.1 or 192.168.0.1), look for IPv6 settings under LAN or Network Configuration and toggle them off.
  • After disabling IPv6 on your device or router, restart both to may support the change takes effect — some systems cache network settings until reboot.

Disable IPv6 on Windows

Open Settings and go to Network & Internet, then select the network connection you're using (Ethernet or Wi-Fi). Scroll down to Related Settings and click Change Adapter Options. Right-click your active connection and select Properties. In the list of protocols, find Internet Protocol Version 6 (TCP/IPv6), uncheck the box next to it, and click OK.

If you want to disable it more thoroughly, you can also disable it through the Registry. Press Windows Key + R, type regedit, and navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\TCPIP6\Parameters. Find the entry called DisabledComponents, double-click it, and change the value to 255 (this disables IPv6 entirely). If DisabledComponents doesn't exist, right-click in the empty space, select New > DWORD (32-bit) Value, name it DisabledComponents, and set it to 255. Restart your computer for the change to take effect.

Disable IPv6 on Mac

Open System Preferences and go to Network. Select your active connection (Wi-Fi or Ethernet) from the left sidebar and click Advanced. Click the TCP/IP tab. In the Configure IPv6 dropdown, select Off instead of Automatic or Link-Local. Click OK, then explore to save the change.

Your Mac will explore this when ready without requiring a restart, though you may want to disconnect and reconnect to your network to confirm the change took effect. If you're using a newer Mac with macOS Monterey or later, the steps are identical but the menu path is System Settings instead of System Preferences.

Disable IPv6 on Linux

Open Terminal and run the following command: sudo sysctl -w net.ipv6.conf.all.disable_ipv6=1. This disables IPv6 when ready. To make the change permanent across reboots, open a text editor with root access and edit /etc/sysctl.conf. Add the line net.ipv6.conf.all.disable_ipv6=1 at the end of the file, save it, and restart your system.

If you're using a distribution that relies on netplan (Ubuntu 18.04 and later), you can also edit your netplan configuration file directly. Open Terminal and run sudo nano /etc/netplan/01-netcfg.yaml (the filename may vary), add ipv6: false under your network interface settings, save the file, and run sudo netplan explore.

Disable IPv6 on your router

Open a web browser and type your router's IP address into the address bar — this is usually 192.168.1.1 or 192.168.0.1, though some routers use 192.168.100.1 or 10.0.0.1. You'll be prompted to log in with your router's admin username and password (often admin/admin or admin/password if you haven't changed it). Check the sticker on the back of your router if you're unsure.

Once logged in, look for a section called LAN Settings, Network Configuration, or IPv6. The exact location varies by manufacturer — Netgear routers typically have it under Advanced > IPv6, while TP-Link routers place it under Network > IPv6. Find the toggle or checkbox for IPv6 and disable it. Some routers have separate toggles for DHCPv6 and Router Advertisement — disable both. Save your changes and restart the router by unplugging it for 30 seconds, then plugging it back in.

What happens after you disable IPv6

Your devices will continue to connect to the internet normally using IPv4. Websites, email, streaming, and all standard internet traffic will work exactly as before — IPv4 still handles the overwhelming majority of home network traffic. You won't notice any difference in speed or functionality.

The only scenario where you might encounter a problem is if a website or service has dropped IPv4 support entirely and only works over IPv6, but this is extremely rare for consumer-facing services. If you disable IPv6 and then find a specific service stops working, you can re-enable it by reversing the steps above. Most people who disable IPv6 never need to turn it back on.

When to leave IPv6 enabled instead

If your router firmware is current and you're not experiencing connection problems, there's no security reason to disable IPv6 — modern routers handle it safely. Disabling it removes a potential future capability: as the internet transitions toward IPv6, some services may eventually require it. If you're not troubleshooting a specific problem, leaving it on is the safer long-term choice.

You should also leave IPv6 enabled if you use IPv6-specific services like certain VPNs, gaming platforms, or enterprise networks that rely on it. Check with your VPN provider or network administrator before disabling it in those cases — you may inadvertently break your connection.

Frequently Asked Questions

Will disabling IPv6 make my internet slower?

No. IPv4 handles nearly all home network traffic, and disabling IPv6 won't affect speed or performance. If anything, removing an unused protocol can slightly reduce background network overhead, though the difference is imperceptible in normal use.

Do I need to disable IPv6 on both my device and my router?

Yes. Disabling it only on your device won't stop your router from broadcasting IPv6, and disabling it only on your router won't prevent your device from trying to use it. Disabling both ensures IPv6 is fully off on your network.

Can I disable IPv6 on just one device while leaving it on for others?

Yes. You can disable IPv6 on individual devices through their network settings without touching the router. However, if you want to disable it network-wide, you must disable it on the router itself, which affects all connected devices.

What if I disable IPv6 and my internet stops working?

Re-enable IPv6 by reversing the steps you took. If you edited the Registry on Windows, change DisabledComponents back to 0 or delete the entry entirely. If you used Terminal on Mac or Linux, run the opposite command (change the 1 to 0). Restart your device and your connection should return.

Is disabling IPv6 a security best practice?

Not necessarily. Modern routers with current firmware handle IPv6 securely. Disabling it only makes sense if you're troubleshooting a specific problem or your router doesn't support IPv6 properly. For most home networks, leaving it enabled is the better choice.